On the public citation graph

Assessment of the Feasibility of Using Additive Manufacturing from Metal Powder to Produce Compact Heat Exchangers

https://doi.org/10.2139/ssrn.4803437
0 signed · 58 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/bimj.4710230103openalex-extracted
An Upper Bound for the Number of Treatments Common to any Set of Blocks of Certain PBIB Designs
inferredcites →https://doi.org/10.1007/s00170-012-4688-9openalex-extracted
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
inferredcites →https://doi.org/10.1007/s00170-014-6297-2openalex-extracted
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
inferredcites →https://doi.org/10.1007/s00170-020-04930-wopenalex-extracted
Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques
inferredcites →https://doi.org/10.1007/s00170-020-05827-4openalex-extracted
Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process
inferredcites →https://doi.org/10.1007/s11661-016-3478-7openalex-extracted
Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys
inferredcites →https://doi.org/10.1007/s11665-016-2140-2openalex-extracted
Electropolishing of Re-melted SLM Stainless Steel 316L Parts Using Deep Eutectic Solvents: 3 × 3 Full Factorial Design
inferredcites →https://doi.org/10.1007/s40964-018-0059-xopenalex-extracted
Additively manufactured high-performance counterflow heat exchanger
inferredcites →https://doi.org/10.1016/b978-0-08-100433-3.00002-6openalex-extracted
Powder bed fusion processes
inferredcites →https://doi.org/10.1016/j.actaastro.2017.05.020openalex-extracted
Manufacturing of a high-temperature resistojet heat exchanger by selective laser melting
inferredcites →https://doi.org/10.1016/j.addma.2015.09.003openalex-extracted
Additive manufacturing of heat exchangers: A case study on a multi-layered Ti–6Al–4V oscillating heat pipe
inferredcites →https://doi.org/10.1016/j.addma.2022.102937openalex-extracted
Binder jet additive manufacturing of ceramic heat exchangers for concentrating solar power applications with thermal energy storage in molten chlorides
inferredcites →https://doi.org/10.1016/j.addma.2023.103778openalex-extracted
Functional morphology change of TPMS structures for design and additive manufacturing of compact heat exchangers
inferredcites →https://doi.org/10.1016/j.apenergy.2020.116041openalex-extracted
Additive Manufacturing for Energy: A Review
inferredcites →https://doi.org/10.1016/j.apenergy.2024.122983openalex-extracted
Optimizing performance for cooling electronic components using innovative heterogeneous materials
inferredcites →https://doi.org/10.1016/j.applthermaleng.2015.05.018openalex-extracted
Experimental and simulation study on the air side thermal hydraulic performance of automotive heat exchangers
inferredcites →https://doi.org/10.1016/j.applthermaleng.2017.09.140openalex-extracted
Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants
inferredcites →https://doi.org/10.1016/j.applthermaleng.2018.04.032openalex-extracted
Design and evaluation of an additively manufactured aircraft heat exchanger
inferredcites →https://doi.org/10.1016/j.applthermaleng.2018.08.032openalex-extracted
An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications
inferredcites →https://doi.org/10.1016/j.applthermaleng.2020.115775openalex-extracted
Design, additive manufacturing, and performance of heat exchanger with a novel flow-path architecture
inferredcites →https://doi.org/10.1016/j.applthermaleng.2021.116973openalex-extracted
Thermal and hydrodynamic analysis of a compact heat exchanger produced by additive manufacturing
inferredcites →https://doi.org/10.1016/j.applthermaleng.2022.118339openalex-extracted
High performance, microarchitected, compact heat exchanger enabled by 3D printing
inferredcites →https://doi.org/10.1016/j.applthermaleng.2023.121387openalex-extracted
Additive manufacturing of heat exchangers in aerospace applications: a review
inferredcites →https://doi.org/10.1016/j.corsci.2023.111214openalex-extracted
Effect of subcritical-temperature heat treatment on corrosion of SLM SS316L with different process parameters
inferredcites →https://doi.org/10.1016/j.energy.2017.02.061openalex-extracted
Experimental investigation of exergy loss analysis in newly designed compact heat exchangers
inferredcites →https://doi.org/10.1016/j.energy.2022.124053openalex-extracted
Topology optimization of heat exchangers: A review
inferredcites →https://doi.org/10.1016/j.energy.2024.130883openalex-extracted
Experimental investigations into the condensation process of new environmentally friendly f-gas substitutes in mini-channels
inferredcites →https://doi.org/10.1016/j.esd.2023.03.003openalex-extracted
Assessment of energy consumption in the context of implementing additive manufacturing technologies: Evidence from Polish small and medium sized production companies
inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.037openalex-extracted
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering
inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.053openalex-extracted
Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection
inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.095openalex-extracted
Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays
inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.026openalex-extracted
Heat and mass transfer for compact heat exchanger (CHXs) design: A state-of-the-art review
inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2021.121787openalex-extracted
Review on high heat flux flow boiling of refrigerants and water for electronics cooling
inferredcites →https://doi.org/10.1016/j.ijpvp.2022.104714openalex-extracted
Structural analysis of compact heat exchanger samples fabricated by additive manufacturing
inferredcites →https://doi.org/10.1016/j.jclepro.2019.119731openalex-extracted
Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturing
inferredcites →https://doi.org/10.1016/j.jmapro.2020.07.025openalex-extracted
Metal additive manufacturing: Technology, metallurgy and modelling
inferredcites →https://doi.org/10.1016/j.jmatprotec.2012.11.011openalex-extracted
Surface roughness analysis, modelling and prediction in selective laser melting
inferredcites →https://doi.org/10.1016/j.jmatprotec.2014.06.005openalex-extracted
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
inferredcites →https://doi.org/10.1016/j.matdes.2014.05.021openalex-extracted
Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting
inferredcites →https://doi.org/10.1016/j.matlet.2016.05.064openalex-extracted
Microstructure and mechanical properties of additive manufactured copper alloy
inferredcites →https://doi.org/10.1016/j.matpr.2020.08.415openalex-extracted
Powder bed fusion process: A brief review
inferredcites →https://doi.org/10.1016/j.optlastec.2020.106283openalex-extracted
Review on residual stress in selective laser melting additive manufacturing of alloy parts
inferredcites →https://doi.org/10.1016/j.phpro.2010.08.083openalex-extracted
Selective laser melting technology: From the single laser melted track stability to 3D parts of complex shape
inferredcites →https://doi.org/10.1016/j.pmatsci.2017.10.001openalex-extracted
Additive manufacturing of metallic components – Process, structure and properties
inferredcites →https://doi.org/10.1016/j.rser.2011.07.066openalex-extracted
Compact heat exchangers: A review and future applications for a new generation of high temperature solar receivers
inferredcites →https://doi.org/10.1016/j.tsep.2021.100865openalex-extracted
Universal heat exchanger for air and evaporative cooling of electronics
inferredcites →https://doi.org/10.1016/s0007-8506(07)60395-3openalex-extracted
Fundamentals of Selective Laser Melting of alloyed steel powders
inferredcites →https://doi.org/10.1115/1.4032167openalex-extracted
Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels
inferredcites →https://doi.org/10.1115/1.4032168openalex-extracted
Build Direction Effects on Additively Manufactured Channels
inferredcites →https://doi.org/10.3390/coatings11060740openalex-extracted
A Review on Additive Manufacturing of Pure Copper
inferredcites →https://doi.org/10.3390/ma15124352openalex-extracted
The Influence of the Structure Parameters on the Mechanical Properties of Cylindrically Mapped Gyroid TPMS Fabricated by Selective Laser Melting with 316L Stainless Steel Powder
inferredcites →https://doi.org/10.3390/ma16083196openalex-extracted
Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel
inferredcites →https://doi.org/10.3390/ma16103867openalex-extracted
An Overview of the Latest Progress in Internal Surface Finishing of the Additively Manufactured Metallic Components
inferredcites →https://doi.org/10.3390/ma6104737openalex-extracted
Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
inferredcites →https://doi.org/10.3390/met11020182openalex-extracted
Additive Manufactured 316L Stainless-Steel Samples: Microstructure, Residual Stress and Corrosion Characteristics after Post-Processing
inferredcites →https://doi.org/10.3390/met11071076openalex-extracted
Selective Laser Melting of 316L Austenitic Stainless Steel: Detailed Process Understanding Using Multiphysics Simulation and Experimentation
inferredcites →https://doi.org/10.3390/nano8080601openalex-extracted
Femtosecond Laser Produced Hydrophobic Hierarchical Structures on Additive Manufacturing Parts
inferredcites →https://doi.org/10.3390/su12197936openalex-extracted
Design for Additive Manufacturing: A Systematic Review
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.