On the public citation graph

Regulating Hardness Homogeneity and Corrosion Resistance of Al-Zn-Mg-Cu Alloy Via Ecap Combined with Inter-Pass Aging

https://doi.org/10.2139/ssrn.4870183
0 signed · 55 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s10853-006-0899-5openalex-extracted
The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP
inferredcites →https://doi.org/10.1007/s11595-014-0960-1openalex-extracted
The evolution of hardness homogeneity in commercially pure Ti processed by ECAP
inferredcites →https://doi.org/10.1007/s11661-018-4601-8openalex-extracted
Mitigating Intergranular Stress Corrosion Cracking in Age-Hardenable Al-Zn-Mg-Cu Alloys
inferredcites →https://doi.org/10.1007/s11771-023-5267-yopenalex-extracted
Effect of room temperature multi-pass ECAP deformation on mechanical properties and precipitation phase distribution of 7075 aluminium alloy
inferredcites →https://doi.org/10.1016/0956-7151(91)90179-5openalex-extracted
On the coarsening of precipitates located on grain boundaries and dislocations
inferredcites →https://doi.org/10.1016/j.actamat.2006.10.015openalex-extracted
Relation between precipitate-free zone width and grain boundary type in 7075-T7 Al alloy
inferredcites →https://doi.org/10.1016/j.actamat.2018.07.003openalex-extracted
Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy
inferredcites →https://doi.org/10.1016/j.actamat.2022.117872openalex-extracted
The localization of plastic deformation in the precipitate free zone of an Al-Mg-Si-Mn alloy
inferredcites →https://doi.org/10.1016/j.corsci.2017.02.018openalex-extracted
Effects of mechanical and chemical pre-treatments on the morphology and composition of surfaces of aluminium alloys 7075-T6 and 2024-T3
inferredcites →https://doi.org/10.1016/j.corsci.2022.110625openalex-extracted
The grain size effect on corrosion property of Al 2 Cr 5 Cu 5 Fe 53 Ni 35 high-entropy alloy in marine environment
inferredcites →https://doi.org/10.1016/j.corsci.2023.111211openalex-extracted
Simultaneously improving tensile properties and stress corrosion cracking resistance of 7075-T6 aluminum alloy by USRP treatment
inferredcites →https://doi.org/10.1016/j.corsci.2023.111719openalex-extracted
Investigation of microstructure and corrosion resistance of an Al-Zn-Mg-Cu alloy under various ageing conditions
inferredcites →https://doi.org/10.1016/j.jallcom.2013.07.177openalex-extracted
Effect of recrystallization and heat treatment on strength and SCC of an Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2014.10.044openalex-extracted
Effect of recrystallization on intergranular fracture and corrosion of Al–Zn–Mg–Cu–Zr alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2017.11.070openalex-extracted
The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2018.03.206openalex-extracted
Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP
inferredcites →https://doi.org/10.1016/j.jallcom.2018.05.085openalex-extracted
Fatigue behavior of AA7075 aluminium alloy severely deformed by equal channel angular pressing
inferredcites →https://doi.org/10.1016/j.jallcom.2018.12.024openalex-extracted
Simultaneously enhanced mechanical strength and inter-granular corrosion resistance in high strength 7075 Al alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2019.152264openalex-extracted
Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085
inferredcites →https://doi.org/10.1016/j.jallcom.2020.157164openalex-extracted
Precipitation-hardness map for Al–Cu–Mg alloy (AA2024-T3)
inferredcites →https://doi.org/10.1016/j.jallcom.2021.163184openalex-extracted
ECAP based regulation mechanism of shape memory properties of NiTiNb alloys
inferredcites →https://doi.org/10.1016/j.jallcom.2022.164400openalex-extracted
Microstructure analysis of 7050 aluminum alloy processed by multistage aging treatments
inferredcites →https://doi.org/10.1016/j.jallcom.2022.167800openalex-extracted
Forming Mechanism, Mechanical Properties, and Corrosion Properties of Aluminum Alloy Sheet with Gradient Structure Processed by Plastic Flow Machining
inferredcites →https://doi.org/10.1016/j.jmrt.2023.07.274openalex-extracted
Synchronous improvement in mechanical properties and corrosion resistance of Mg-Gd-Ag-Zr alloy through nanoprecipitates
inferredcites →https://doi.org/10.1016/j.jmrt.2023.08.258openalex-extracted
Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.jmrt.2023.09.070openalex-extracted
Achieving ultra-fine grains and high corrosion resistance of Al–Zn–Mg–Cu alloy by ECAP and post cold rolling
inferredcites →https://doi.org/10.1016/j.jmrt.2023.11.086openalex-extracted
Influence of niobium and hafnium doping on the wear and corrosion resistance of coatings based on ZrN
inferredcites →https://doi.org/10.1016/j.jmst.2019.11.035openalex-extracted
Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy
inferredcites →https://doi.org/10.1016/j.jmst.2021.11.068openalex-extracted
Synchronous improvement of mechanical properties and stress corrosion resistance by stress-aging coupled with natural aging pre-treatment in an Al-Zn-Mg alloy with high recrystallization fraction
inferredcites →https://doi.org/10.1016/j.matchar.2013.07.016openalex-extracted
A characterization of microstructure and microhardness on longitudinal planes of an Al–Mg–Si alloy processed by ECAP
inferredcites →https://doi.org/10.1016/j.matchar.2016.01.022openalex-extracted
Effect of precipitate state on the stress corrosion behavior of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.matchar.2019.04.031openalex-extracted
Influence of equal channel angular pressing on the evolution of microstructures, aging behavior and mechanical properties of as-quenched Al-6.6Zn-1.25Mg alloy
inferredcites →https://doi.org/10.1016/j.matchar.2023.113248openalex-extracted
Effect of intermediate-temperature severe plastic deformation on microstructure evolution, mechanical properties and corrosion behavior of an Al-Zn-Mg-Cu alloy
inferredcites →https://doi.org/10.1016/j.matdes.2011.08.003openalex-extracted
Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion
inferredcites →https://doi.org/10.1016/j.matdes.2014.01.008openalex-extracted
Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment
inferredcites →https://doi.org/10.1016/j.matdes.2016.08.091openalex-extracted
An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals
inferredcites →https://doi.org/10.1016/j.msea.2009.03.063openalex-extracted
Effect of Cu content and number of passes on evolution of microstructure and mechanical properties of ECAPed Al/Cu alloys
inferredcites →https://doi.org/10.1016/j.msea.2009.03.081openalex-extracted
The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet
inferredcites →https://doi.org/10.1016/j.msea.2011.01.074openalex-extracted
Hardness homogeneity on longitudinal and transverse sections of an aluminum alloy processed by ECAP
inferredcites →https://doi.org/10.1016/j.msea.2012.07.022openalex-extracted
The development of hardness homogeneity in a Cu–Zr alloy processed by equal-channel angular pressing
inferredcites →https://doi.org/10.1016/j.msea.2016.12.099openalex-extracted
Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy
inferredcites →https://doi.org/10.1016/j.msea.2017.01.024openalex-extracted
Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment
inferredcites →https://doi.org/10.1016/j.msea.2018.06.047openalex-extracted
Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging
inferredcites →https://doi.org/10.1016/j.msea.2022.143764openalex-extracted
Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.msea.2023.146026openalex-extracted
Controllable precipitation behavior near grain boundaries enabled by artificial strain concentration in age-hardening aluminum alloys
inferredcites →https://doi.org/10.1016/j.msea.2024.146134openalex-extracted
Achieving high performance by optimized heat treatment in a spray formed Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.stam.2004.02.007openalex-extracted
Quantitative characterization of precipitate free zones in Al–Zn–Mg(–Ag) alloys by microchemical analysis and nanoindentation measurement
inferredcites →https://doi.org/10.1016/j.vacuum.2020.109191openalex-extracted
On achieving superior strength for Al–Mg–Zn alloy adopting cold ECAP
inferredcites →https://doi.org/10.1016/s0921-5093(99)00248-8openalex-extracted
Equal channel angular extrusion: from macromechanics to structure formation
inferredcites →https://doi.org/10.1016/s1003-6326(08)60407-0openalex-extracted
Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP
inferredcites →https://doi.org/10.1016/s1003-6326(15)64034-1openalex-extracted
Influence of ECAP as grain refinement technique on microstructure evolution, mechanical properties and corrosion behavior of pure aluminum
inferredcites →https://doi.org/10.1016/s1003-6326(22)65831-xopenalex-extracted
Diversity of intergranular corrosion and stress corrosion cracking for 5083 Al alloy with different grain sizes
inferredcites →https://doi.org/10.1016/s1003-6326(23)66307-1openalex-extracted
Combining pre-rolling with retrogression and re-aging treatment to balance strength and corrosion resistance of 7A99 Al alloy
inferredcites →https://doi.org/10.1186/s10033-021-00549-4openalex-extracted
Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063
inferredcites →https://doi.org/10.2139/ssrn.4157016openalex-snapshot
The Grain Size Effect on Corrosion Property of Al2cr5cu5fe53ni35 High-Entropy Alloy in Marine Environment
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.