On the public citation graph

Synergistic Effect of Steel and Pva Fibers on Mechanical and Microstructural Performance of Ceramic Waste-Ggbs Based Green Composites

https://doi.org/10.2139/ssrn.5168849
0 signed · 70 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/9780470339749.ch22openalex-snapshot
Will Geopolymers Stand the Test of Time?
inferredcites →https://doi.org/10.1002/suco.202201010openalex-snapshot
The effect of marble powder on physico‐mechanical and microstructural properties of kaolin‐based geopolymer pastes
inferredcites →https://doi.org/10.1016/b978-0-443-15301-3.00007-5openalex-snapshot
Introduction to fiber-reinforced alkali-activated composites
inferredcites →https://doi.org/10.1016/j.cemconcomp.2013.09.006openalex-snapshot
Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
inferredcites →https://doi.org/10.1016/j.cemconcomp.2020.103617openalex-snapshot
Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature
inferredcites →https://doi.org/10.1016/j.cemconcomp.2022.104767openalex-snapshot
Deep insight into mechanical behavior and microstructure mechanism of quicklime-activated ground granulated blast-furnace slag pastes
inferredcites →https://doi.org/10.1016/j.cemconres.2010.08.017openalex-snapshot
Effect of binder content on the performance of alkali-activated slag concretes
inferredcites →https://doi.org/10.1016/j.ceramint.2017.07.072openalex-snapshot
Compressive strength and microstructure of alkali-activated mortars with high ceramic waste content
inferredcites →https://doi.org/10.1016/j.ceramint.2018.07.216openalex-snapshot
CO2 binding capacity of alkali-activated fly ash and slag pastes
inferredcites →https://doi.org/10.1016/j.ceramint.2021.05.099openalex-snapshot
Effects of nanosilica and steel fibers on the impact resistance of slag based self-compacting alkali-activated concrete
inferredcites →https://doi.org/10.1016/j.clet.2020.100035openalex-snapshot
Performance of cementless binders produced from industrial waste products in strong acid
inferredcites →https://doi.org/10.1016/j.compositesb.2024.111827openalex-snapshot
Enhancing toughness in cement-based composites: Unraveling the composite effect mechanisms of polymers and fibers through physic testing and molecular dynamics simulations
inferredcites →https://doi.org/10.1016/j.conbuildmat.2007.10.015openalex-snapshot
Alkali-activated binders: A review
inferredcites →https://doi.org/10.1016/j.conbuildmat.2013.01.031openalex-snapshot
Properties and microstructure of alkali-activated red clay brick waste
inferredcites →https://doi.org/10.1016/j.conbuildmat.2013.08.063openalex-snapshot
Synthesis and thermal behavior of geopolymer-type material from waste ceramic
inferredcites →https://doi.org/10.1016/j.conbuildmat.2016.03.176openalex-snapshot
Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement
inferredcites →https://doi.org/10.1016/j.conbuildmat.2016.08.153openalex-snapshot
Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash
inferredcites →https://doi.org/10.1016/j.conbuildmat.2016.10.023openalex-snapshot
Alternative cements based on alkali-activated red clay brick waste
inferredcites →https://doi.org/10.1016/j.conbuildmat.2017.05.122openalex-snapshot
Alkali-activated building materials made with recycled construction and demolition wastes
inferredcites →https://doi.org/10.1016/j.conbuildmat.2018.04.030openalex-snapshot
Concrete resistant to spalling made with recycled aggregate from sanitary ceramic wastes – The effect of moisture and porosity on destructive processes occurring in fire conditions
inferredcites →https://doi.org/10.1016/j.conbuildmat.2019.03.228openalex-snapshot
Development of fly ash/slag based self-compacting geopolymer concrete using nano-silica and steel fiber
inferredcites →https://doi.org/10.1016/j.conbuildmat.2019.116965openalex-snapshot
Intrinsic properties and micro-crack characteristics of ultra-high toughness fly ash/steel slag based geopolymer
inferredcites →https://doi.org/10.1016/j.conbuildmat.2019.117502openalex-snapshot
Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites
inferredcites →https://doi.org/10.1016/j.conbuildmat.2019.117574openalex-snapshot
Effects of ceramic tile powder waste on properties of self-compacted alkali-activated concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2020.118221openalex-snapshot
Comparative study on the effect of fiber type and content on the performance of one-part alkali-activated mortar
inferredcites →https://doi.org/10.1016/j.conbuildmat.2020.120222openalex-snapshot
High performance cementless composites from alkali activated GGBFS
inferredcites →https://doi.org/10.1016/j.conbuildmat.2020.121766openalex-snapshot
Review on different testing methods and factors affecting fracture properties of fiber reinforced cementitious composites
inferredcites →https://doi.org/10.1016/j.conbuildmat.2021.124138openalex-snapshot
Development and characterization of binary recycled ceramic tile and brick wastes-based geopolymers at ambient and high temperatures
inferredcites →https://doi.org/10.1016/j.conbuildmat.2022.127041openalex-snapshot
Effect of elevated temperatures on mechanical and microstructural properties of alkali-activated mortar made up of POFA and GGBS
inferredcites →https://doi.org/10.1016/j.conbuildmat.2022.129841openalex-snapshot
Mechanical properties of hybrid fiber reinforced ternary-blended alkali-activated materials
inferredcites →https://doi.org/10.1016/j.conbuildmat.2022.129990openalex-snapshot
Influence of nano-SiO2 and steel fiber on mechanical and microstructural properties of red mud-based geopolymer concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2023.133697openalex-snapshot
Mechanical properties of alkali-activated slag based SIFCON incorporating waste steel fibers and waste glass
inferredcites →https://doi.org/10.1016/j.conbuildmat.2023.134669openalex-snapshot
Drying shrinkage properties of fiber-reinforced alkali-activated slag and their correlations with microstructure
inferredcites →https://doi.org/10.1016/j.conbuildmat.2024.135087openalex-snapshot
Synergistic effects of fiber hybridization on the mechanical performance of seawater sea-sand concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2024.136437openalex-snapshot
Evaluation of long-term properties and life cycle assessment of alkali-activated concrete with varying fiber inclusions
inferredcites →https://doi.org/10.1016/j.conbuildmat.2024.137845openalex-snapshot
Synergistic effects of fiber hybridization on the fracture toughness of seawater sea-sand concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2024.139004openalex-snapshot
Enhancing mechanical strength and microstructural properties of alkali-activated systems through nano graphene oxide dispersion and polycarboxylate ether admixture
inferredcites →https://doi.org/10.1016/j.conbuildmat.2024.139812openalex-snapshot
Single and multi-response optimization of retarded admixture on alkali activated slag rheological behavior by the taguchi method
inferredcites →https://doi.org/10.1016/j.cscm.2022.e00920openalex-snapshot
Strength, durability and micro-structural assessment of slag-agro blended based alkali activated engineered geopolymer composites
inferredcites →https://doi.org/10.1016/j.cscm.2024.e03306openalex-snapshot
Long-term behaviors of fiber reinforced alkali-activated composite cured at ambient condition: Mechanical characterization
inferredcites →https://doi.org/10.1016/j.jclepro.2018.01.001openalex-snapshot
Matrix hybridization using waste fuel ash and slag in alkali-activated composites and its influence on maturity of fiber-matrix bond
inferredcites →https://doi.org/10.1016/j.jclepro.2020.124358openalex-snapshot
Mechanical and microstructural characterization of geopolymers from assorted construction and demolition waste-based masonry and glass
inferredcites →https://doi.org/10.1016/j.jclepro.2022.130650openalex-snapshot
Optimized application of ternary brick, ceramic and concrete wastes in sustainable high strength geopolymers
inferredcites →https://doi.org/10.1016/j.jestch.2025.101997openalex-snapshot
Early and long-term performance evaluation of low NaOH concentrated waste HBP-GGBS based alkali activated composites
inferredcites →https://doi.org/10.1016/j.jmrt.2023.06.115openalex-snapshot
Investigating the influence of PVA and PP fibers on the mechanical, durability, and microstructural properties of one-part alkali-activated mortar: An experimental study
inferredcites →https://doi.org/10.1016/j.jmrt.2024.08.002openalex-snapshot
Achieving superior mechanical performance in one-part geopolymer composites through innovative hybrid fiber systems of recycled steel and PVA fibers
inferredcites →https://doi.org/10.1016/j.jobe.2020.101519openalex-snapshot
An experimental study on fracture energy of alkali activated slag composites incorporated different fibers
inferredcites →https://doi.org/10.1016/j.jobe.2021.102906openalex-snapshot
Development of optimized binary ceramic tile and concrete wastes geopolymer binders for in-situ applications
inferredcites →https://doi.org/10.1016/j.jobe.2022.104104openalex-snapshot
Properties of geopolymers sourced from construction and demolition waste: A review
inferredcites →https://doi.org/10.1016/j.jobe.2022.105186openalex-snapshot
Early properties and chemical structure analysis of alkali-activated brick geopolymer with varied alkali dosage
inferredcites →https://doi.org/10.1016/j.jobe.2022.105663openalex-snapshot
Alkali-activated red ceramic wastes-carbide lime blend: An alternative alkaline cement manufactured at room temperature
inferredcites →https://doi.org/10.1016/j.jobe.2023.108385openalex-snapshot
Addition of ceramic waste for the preparation of VA-based alkali-activated material with high temperature resistance
inferredcites →https://doi.org/10.1016/j.jobe.2024.109145openalex-snapshot
Early age reaction, rheological properties, and environment impact of NaOH-activated fly ash mixtures at ambient environment
inferredcites →https://doi.org/10.1016/j.jobe.2024.111255openalex-snapshot
Effects of Na2SiO3/NaOH ratio in alkali activator on the microstructure, strength and chloride ingress in fly ash and GGBS based alkali activated concrete
inferredcites →https://doi.org/10.1016/j.matchemphys.2023.128403openalex-snapshot
Effect of ceramic waste powder content and sodium hydroxide molarity on the residual mechanical strength of alkali-activated mortars
inferredcites →https://doi.org/10.1016/j.matdes.2023.112280openalex-snapshot
Multiscale ab-initio modeling and experiment of nano-CaCO3 and fiber synergy on toughening low-carbon geopolymer composites
inferredcites →https://doi.org/10.1016/j.matpr.2023.04.121openalex-snapshot
Engineering attributes of alkali-activated mortars containing ceramic tiles waste as aggregates replacement: Effect of high-volume fly ash inclusion
inferredcites →https://doi.org/10.1016/j.rineng.2024.101797openalex-snapshot
The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali–activated mortar composites
inferredcites →https://doi.org/10.1016/j.saa.2018.02.067openalex-snapshot
Influence of alkali metal cations/type of activator on the structure of alkali-activated fly ash – ATR-FTIR studies
inferredcites →https://doi.org/10.1016/j.sajce.2021.09.002openalex-snapshot
The Process, Characterization and Mechanical properties of fly ash-based Solid form geopolymer via mechanical activation
inferredcites →https://doi.org/10.1016/j.tafmec.2024.104630openalex-snapshot
Flexural and fracture performance of fiber reinforced self compacting alkali activated concrete– A DOE approach
inferredcites →https://doi.org/10.1080/0371750x.2019.1640637openalex-snapshot
Effect of Concrete Waste on Compressive Strength and Microstructure Development of Ceramic Geopolymer Pastes
inferredcites →https://doi.org/10.1155/2022/8931401openalex-snapshot
Shrinkage and Mechanical Properties of Fibre‐Reinforced Blast Furnace Slag‐Steel Slag‐Based Geopolymer
inferredcites →https://doi.org/10.1515/rams-2021-0067openalex-snapshot
State of the art, challenges, and emerging trends: Geopolymer composite reinforced by dispersed steel fibers
inferredcites →https://doi.org/10.16984/saufenbilder.1314703openalex-snapshot
Designing Hollow Brick Waste Based Alkali Activated Composites by Taguchi Method
inferredcites →https://doi.org/10.31462/jseam.2023.01070083openalex-snapshot
Effects of glass fiber usage on fracture energy and mechanical behavior of concrete: An experimental approach
inferredcites →https://doi.org/10.3390/fib10120104openalex-snapshot
Evaluation of the Tensile Characteristics and Bond Behaviour of Steel Fibre-Reinforced Concrete: An Overview
inferredcites →https://doi.org/10.3390/ma12010037openalex-snapshot
Effect of Modified Polyvinyl Alcohol Fibers on the Mechanical Behavior of Engineered Cementitious Composites
inferredcites →https://doi.org/10.3390/ma14164447openalex-snapshot
Workability and Flexural Properties of Fibre-Reinforced Geopolymer Using Different Mono and Hybrid Fibres
inferredcites →https://doi.org/10.47495/okufbed.1001854openalex-snapshot
Kür Sıcaklığının Alkali Aktivasyonlu Lifli Betonunun Kırılma Özelliklerine Etkisi
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.