On the public citation graph
Experimental investigations of material models for Ti-6A1-4V and 2024-T3
0 signed · 232 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/978-1-4613-3787-4_4openalex-snapshot
Strain-Rate Effects in Metals at Large Shear Strains
inferredcites →https://doi.org/10.1007/bf02651653openalex-snapshot
An analysis of the low temperature, low and high strain-rate deformation of Ti−6Al−4V
inferredcites →https://doi.org/10.1007/bf02658401openalex-snapshot
Texture strengthening and strength differential in titanium-6Al-4V
inferredcites →https://doi.org/10.1016/0001-6160(88)90030-2openalex-snapshot
A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable
inferredcites →https://doi.org/10.1016/0013-7944(85)90052-9openalex-snapshot
Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures
inferredcites →https://doi.org/10.1016/0020-7403(79)90051-1openalex-snapshot
High strain rate compression of titanium and some titanium alloys
inferredcites →https://doi.org/10.1016/0036-9748(73)90054-9openalex-snapshot
The strength differential of steel and Ti alloys as influenced by test temperature and microstructure
inferredcites →https://doi.org/10.1016/0956-7151(92)90166-copenalex-snapshot
The effect of dislocation drag on the stress-strain behavior of F.C.C. metals
inferredcites →https://doi.org/10.1063/1.327799openalex-snapshot
A constitutive model for metals applicable at high-strain rate
inferredcites →https://doi.org/10.1063/1.338024openalex-snapshot
Dislocation-mechanics-based constitutive relations for material dynamics calculations
inferredcites →https://doi.org/10.1063/1.341344openalex-snapshot
Evaluation of cylinder-impact test data for constitutive model constants
inferredcites →https://doi.org/10.1115/1.3225618openalex-snapshot
Response of Various Metals to Large Torsional Strains Over a Large Range of Strain Rates—Part 2: Less Ductile Metals
inferredcites →https://doi.org/10.1201/9781003573661-28openalex-snapshot
High-Strain-Rate Deformation of FCC Metals and Alloys
inferredcites →https://doi.org/10.31399/asm.hb.v02.9781627081627openalex-snapshot
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4004829openalex-extracted
Constitutive Analysis on Anti-Penetration Deformation Behavior of Xf1700 Ultra-High Strength Low Alloy Armor Steel in Perceptive of Adiabatic Temperature Rise and Strain
inferred← citeshttps://doi.org/10.1002/pc.29028openalex-snapshot
Low velocity impact resistance of hybrid CFRP ‐elastomer‐metal laminates: Influence of stacking sequence and impact conditions on damage mechanisms
inferred← citeshttps://doi.org/10.1002/srin.202501148openalex-snapshot
Johnson–Cook Constitutive Parameters Identification Based on Multiobjective Optimization Strategy for Cutting Process Simulation
inferred← citeshttps://doi.org/10.1007/978-1-4614-4238-7_45openalex-snapshot
Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
inferred← citeshttps://doi.org/10.1007/978-3-031-17457-5_10openalex-snapshot
Evaluation of Johnson-Cook Failure Model for Aluminium Alloy AA6063-T6
inferred← citeshttps://doi.org/10.1007/978-3-031-58665-1_21openalex-snapshot
Using Neural Networks to Explore Structure-Property Relations in Bio-Inspired Impact-Resistant Structures
inferred← citeshttps://doi.org/10.1007/978-981-13-0107-0_87openalex-snapshot
Failure Mechanisms of Ti–Al3Ti Metal-Intermetallic Laminate Composites
inferred← citeshttps://doi.org/10.1007/978-981-15-0054-1_15openalex-snapshot
Bonding Strength Improvement Through Numerical Simulation of Particle Impact Process During Metal Cold Spray
inferred← citeshttps://doi.org/10.1007/978-981-16-4222-7_31openalex-snapshot
Effect of Varying Tool Parameters on Chip Formation and Reaction Force
inferred← citeshttps://doi.org/10.1007/978-981-32-9072-3_26openalex-snapshot
Study of Cutting Edge Radius Effect on the Cutting Forces and Temperature During Machining of Ti6Al4V
inferred← citeshttps://doi.org/10.1007/s00170-013-5406-yopenalex-snapshot
Finite element analysis and design optimization of low plasticity burnishing process
inferred← citeshttps://doi.org/10.1007/s00170-016-8512-9openalex-snapshot
Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite
inferred← citeshttps://doi.org/10.1007/s00170-016-8563-yopenalex-snapshot
Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study
inferred← citeshttps://doi.org/10.1007/s00170-017-1112-5openalex-snapshot
Analysis of stress increment in shot peen forming weak-stiffness component
inferred← citeshttps://doi.org/10.1007/s00170-018-1606-9openalex-snapshot
Predictive cutting force model for a cryogenic machining process incorporating the phase transformation of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1007/s00170-018-2108-5openalex-snapshot
Electromagnetic impulse calibration in V-shaped parts
inferred← citeshttps://doi.org/10.1007/s00170-019-03581-wopenalex-snapshot
A design for lumped mass of a shot model in random peening simulation and prediction of dimple size evolution
inferred← citeshttps://doi.org/10.1007/s00170-020-05116-0openalex-snapshot
Numerical and experimental study of the drilling of multi-stacks made of titanium alloy Ti-6Al-4V: interface and burr behavior
inferred← citeshttps://doi.org/10.1007/s00170-020-06057-4openalex-snapshot
Study of segmented chip formation in cutting of high-strength lightweight alloys
inferred← citeshttps://doi.org/10.1007/s00170-021-06805-0openalex-snapshot
Numerical prediction of machining-induced surface residual stress for TC4 cryogenic turning
inferred← citeshttps://doi.org/10.1007/s00170-022-09958-8openalex-snapshot
Study on formation mechanism of serrated chip of Ti-6Al-4V titanium alloy based on shear slip theory
inferred← citeshttps://doi.org/10.1007/s00170-023-11780-9openalex-snapshot
Effects of tailored residual stress on micro-end milling: numerical modelling and validation
inferred← citeshttps://doi.org/10.1007/s00170-023-11978-xopenalex-snapshot
A 3D coupled thermo-mechanical model of laser-assisted machining of Ti-6Al-4V: forces, temperature, and tool wear analysis
inferred← citeshttps://doi.org/10.1007/s00170-025-15835-xopenalex-snapshot
Finite element investigation on shear deformation and cutting force for two types of elliptical vibration cutting Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1007/s00170-026-17905-0openalex-snapshot
The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024
inferred← citeshttps://doi.org/10.1007/s00707-024-03898-yopenalex-snapshot
Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations
inferred← citeshttps://doi.org/10.1007/s10409-023-22492-xopenalex-snapshot
A synchronous thermal-mechanical in-situ device for dynamic fracture initiation
inferred← citeshttps://doi.org/10.1007/s10443-016-9517-0openalex-snapshot
3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis
inferred← citeshttps://doi.org/10.1007/s10853-026-13362-yopenalex-snapshot
Mechanical assessment of an isotropic Ti-6Al-4 V plate-lattice material: numerical and analytical investigations
inferred← citeshttps://doi.org/10.1007/s10957-011-9927-yopenalex-snapshot
Modelling and Simulation of Milling Forces Using an Arbitrary Lagrangian–Eulerian Finite Element Method and Support Vector Regression
inferred← citeshttps://doi.org/10.1007/s11029-024-10195-1openalex-snapshot
Failure Analysis of Thickness Gradient Negative Poisson’s Ratio Concave Honeycomb Sandwich Panels Under Local Impact
inferred← citeshttps://doi.org/10.1007/s11249-017-0939-0openalex-snapshot
A Computational Study of the Effects of Strain Hardening in Micro-asperity Friction Models
inferred← citeshttps://doi.org/10.1007/s11665-017-2795-3openalex-snapshot
Numerical Research on the Effect of Boundary Constraint in Shot Peen Forming
inferred← citeshttps://doi.org/10.1007/s11665-018-3172-6openalex-snapshot
High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage
inferred← citeshttps://doi.org/10.1007/s11665-020-04851-5openalex-snapshot
Prediction of Peen Forming Stress and Curvature with Dynamic Response of Compressively Prestressed Target
inferred← citeshttps://doi.org/10.1007/s11665-022-07026-6openalex-snapshot
Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress
inferred← citeshttps://doi.org/10.1007/s11665-022-07237-xopenalex-snapshot
Constitutive Analysis on Deformation Behavior of XF1700 Ultra-high Strength Low Alloy Steel in Perceptive of Adiabatic Temperature Rise and Strain
inferred← citeshttps://doi.org/10.1007/s11665-023-07890-wopenalex-snapshot
Effect of Declination Angle on the Side Milling Process of Ti6Al4V by a New Three-Dimensional Milling Finite Element Model
inferred← citeshttps://doi.org/10.1007/s11666-021-01188-wopenalex-snapshot
Numerical Analysis of Deformation Behavior and Interface Bonding of Ti6Al4V Particle After Subsequent Impact During Cold Spraying
inferred← citeshttps://doi.org/10.1007/s11668-026-02609-0openalex-snapshot
Mechanical Response and Failure Behavior of Ti–6Al–3Nb–2Zr–1Mo Titanium Alloy Plates Under Blast Loading
inferred← citeshttps://doi.org/10.1007/s11831-023-10026-xopenalex-snapshot
A Review of the Constitutive Modelling of Metals and Alloys in Machining Process
inferred← citeshttps://doi.org/10.1007/s12206-014-1015-4openalex-snapshot
Numerical study of 2024 T3 aluminum plates subjected to impact and perforation
inferred← citeshttps://doi.org/10.1007/s12206-020-2210-0openalex-snapshot
Investigation of the correlation between mechanical chip morphology and surface residual stress for Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1007/s12289-010-0986-7openalex-snapshot
FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface
inferred← citeshttps://doi.org/10.1007/s12541-024-01185-3openalex-snapshot
Study About the Effect of Spot Distance on Bending Moment and the Effect of Non-uniform Spot Array in Laser Peen Forming
inferred← citeshttps://doi.org/10.1007/s13369-020-04876-xopenalex-snapshot
Simulation and Experimental Studies on Arc Efficiency and Mechanical Characterization for GTA-Welded Ti–6Al–4V Sheets
inferred← citeshttps://doi.org/10.1007/s40430-013-0084-0openalex-snapshot
Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling
inferred← citeshttps://doi.org/10.1007/s40430-020-02629-3openalex-snapshot
Experimental and numerical studies on gas tungsten arc welding of Ti–6Al–4V tailor-welded blank
inferred← citeshttps://doi.org/10.1007/s40799-016-0062-4openalex-snapshot
Determination of the Constants of Material Models Using Inverse Taylor Test
inferred← citeshttps://doi.org/10.1007/s43452-024-00951-4openalex-snapshot
Feasibility study of high feed axial ultrasonic vibration turning of Ti6Al4V
inferred← citeshttps://doi.org/10.1007/s44245-024-00031-0openalex-snapshot
Finite element investigation of cutting speed effects on the machining of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/b978-0-12-818232-1.00011-4openalex-snapshot
Residual stresses in machining
inferred← citeshttps://doi.org/10.1016/j.ast.2012.01.010openalex-snapshot
Perforation of aero-engine fan casing by a single rotating blade
inferred← citeshttps://doi.org/10.1016/j.cirpj.2024.05.003openalex-snapshot
Comparative analysis of micro-milling performances of conventionally and additively manufactured Ti6Al4V alloys: Experimental investigation and 3D modelling
inferred← citeshttps://doi.org/10.1016/j.cja.2013.04.013openalex-snapshot
Study on ballistic penetration resistance of titanium alloy TC4, Part II: Numerical analysis
inferred← citeshttps://doi.org/10.1016/j.cja.2019.03.030openalex-snapshot
High-velocity impact responses of 2618 aluminum plates for engine containment systems under combined actions of projectile form and oblique angle
inferred← citeshttps://doi.org/10.1016/j.cja.2020.08.050openalex-snapshot
Characteristics and mechanisms of turboshaft engine axial compressor casing containment
inferred← citeshttps://doi.org/10.1016/j.cja.2021.04.004openalex-snapshot
Failure mechanisms of bolted flanges in aero-engine casings subjected to impact loading
inferred← citeshttps://doi.org/10.1016/j.commatsci.2015.11.034openalex-snapshot
An enhanced Johnson–Cook strength model for splitting strain rate and temperature effects on lower yield stress and plastic flow
inferred← citeshttps://doi.org/10.1016/j.compositesb.2012.06.013openalex-snapshot
Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys
inferred← citeshttps://doi.org/10.1016/j.compscitech.2012.07.016openalex-snapshot
Low-velocity impact response of fibre–metal laminates – Experimental and finite element analysis
inferred← citeshttps://doi.org/10.1016/j.compstruc.2022.106940openalex-snapshot
Exploring the structure-property relations of thin-walled, 2D extruded lattices using neural networks
inferred← citeshttps://doi.org/10.1016/j.compstruct.2012.12.016openalex-snapshot
An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate
inferred← citeshttps://doi.org/10.1016/j.compstruct.2015.07.004openalex-snapshot
Finite element analysis of catastrophic failure of dynamically-loaded countersunk composite fuselage joints
inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.116458openalex-snapshot
3D macro-mechanical FE simulation for GLARE® drilling with experimental validation
inferred← citeshttps://doi.org/10.1016/j.compstruct.2026.120230openalex-snapshot
Ballistic performance of prestressed metal-encased ceramic composite Armors with interpenetrating structure
inferred← citeshttps://doi.org/10.1016/j.dt.2025.07.018openalex-snapshot
Analytical model of the perforation process of spherical-nosed projectiles impacting finite-thickness metal plates
inferred← citeshttps://doi.org/10.1016/j.enganabound.2015.05.005openalex-snapshot
MPM simulations of high-speed and ultra high-speed machining of titanium alloy (Ti–6Al–4V) based on fracture energy approach
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2018.08.020openalex-snapshot
Determination of ductile damage behaviors of high strain rate compression deformation for Ti-6Al-4V alloy using experimental-numerical combined approach
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2018.09.038openalex-snapshot
Internal-structure-model based simulation research of aramid honeycomb sandwich panel subjected to intense impulse loading
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2024.109930openalex-snapshot
Parametric optimization of constitutive and failure model to numerically simulate the dynamic fracture response of AA7475-T7351 under extreme thermomechanical loading
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2026.112294openalex-snapshot
Surface-integrity-informed energy-based life prediction for shot-peened Ti-6Al-4V blades under non-proportional axial–torsional low-cycle fatigue
inferred← citeshttps://doi.org/10.1016/j.engstruct.2011.02.034openalex-snapshot
Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure
inferred← citeshttps://doi.org/10.1016/j.finel.2011.02.016openalex-snapshot
Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach
inferred← citeshttps://doi.org/10.1016/j.finel.2014.08.006openalex-snapshot
Experimental and numerical study of laser-assisted machining of Ti6Al4V titanium alloy
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2011.08.011openalex-snapshot
Prediction and characterization of residual stresses from laser shock peening
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2013.10.001openalex-snapshot
Fatigue crack growth in laser-shock-peened Ti–6Al–4V aerofoil specimens due to foreign object damage
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2004.07.011openalex-snapshot
Fracture prediction of thin plates under localized impulsive loading. Part II: discing and petalling
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2008.10.002openalex-snapshot
Jet engine fan blade containment using an alternate geometry
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2019.02.010openalex-snapshot
Scaled models for failure under impact loading
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2021.104082openalex-snapshot
Effect of incorporating Lode angle parameter into a fracture criterion in predicting ballistic impact behavior of double-layered 2024-T351 aluminum alloy plates against blunt projectiles
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2022.104179openalex-snapshot
Local deformation of Mg–7Gd–5Y–1.2Nd–0.5Zr magnesium alloy under high speed impact along extrusion direction
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2023.104566openalex-snapshot
A study on energy conversion behavior of single-shot elastic-plastic impact during shot peen forming
inferred← citeshttps://doi.org/10.1016/j.ijimpeng.2025.105463openalex-snapshot
Experimental and numerical investigation on the oblique penetration of jacketed long-rod projectiles into spaced targets
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2005.01.007openalex-snapshot
Finite element modeling of erosive wear
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2009.11.004openalex-snapshot
Experimental investigation of transverse vibration-assisted orthogonal cutting of AL-2024
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2015.05.001openalex-snapshot
Stochastic modelling of abrasive waterjet footprints using finite element analysis
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2014.02.017openalex-snapshot
Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2016.06.019openalex-snapshot
Zones of material separation in simulations of cutting
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2019.05.042openalex-snapshot
Influences of ceramic constraint on protection performances of ceramic-metal hybrid structures under impact loads
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2020.105925openalex-snapshot
The breaking of geometric similarity
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2021.106757openalex-snapshot
The mechanism of stress interaction induced by successive impacts in shot peening and wet peening zone
inferred← citeshttps://doi.org/10.1016/j.ijplas.2003.06.005openalex-snapshot
Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys
inferred← citeshttps://doi.org/10.1016/j.ijplas.2006.08.006openalex-snapshot
Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti–6Al–4V titanium alloy over wide ranges of strain rates and temperatures
inferred← citeshttps://doi.org/10.1016/j.ijplas.2012.03.015openalex-snapshot
Deformation induced anisotropic responses of Ti–6Al–4V alloy. Part I: Experiments
inferred← citeshttps://doi.org/10.1016/j.ijsolstr.2013.02.006openalex-snapshot
Plastic deformation of 2024-T351 aluminum plate over a wide range of loading conditions
inferred← citeshttps://doi.org/10.1016/j.ijsolstr.2014.05.010openalex-snapshot
Modelling of perforation failure in fibre metal laminates subjected to high impulsive blast loading
inferred← citeshttps://doi.org/10.1016/j.ijsolstr.2023.112295openalex-snapshot
Predicting ductile failure of aluminum components under general loading conditions: Computational implementation, model verification and experimental validation
inferred← citeshttps://doi.org/10.1016/j.istruc.2023.01.084openalex-snapshot
Compressive and tensile behavior of AA2014-T6 under different strain rates and different temperatures
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.03.035openalex-snapshot
Modeling of variable friction and heat partition ratio at the chip-tool interface during orthogonal cutting of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.jmapro.2022.03.040openalex-snapshot
A dynamic recrystallization based constitutive flow model for micro-machining of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.jmapro.2022.06.075openalex-snapshot
Thermal analysis of drilling in titanium under flood and cryogenic cooling using coupled CFD and FEM
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.10.067openalex-snapshot
Experimental and numerical investigation of the plunge stage in friction stir welding
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2012.09.006openalex-snapshot
Finite element modelling of abrasive waterjet milled footprints
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2023.117867openalex-snapshot
Numerical CFD-FEM model for machining titanium Ti-6Al-4V with nano minimum quantity lubrication: A step towards digital twin
inferred← citeshttps://doi.org/10.1016/j.jmps.2022.104914openalex-snapshot
A rate-dependent phase-field model for dynamic shear band formation in strength-like and toughness-like modes
inferred← citeshttps://doi.org/10.1016/j.joes.2026.08.009openalex-snapshot
Numerical and experimental investigation into suppression and protective mechanisms of porous sandwich lattice structures under implosion dynamics of titanium alloy pressure hulls
inferred← citeshttps://doi.org/10.1016/j.matdes.2007.07.009openalex-snapshot
Computational study of Ti–6Al–4V flow behaviors during the twist extrusion process
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.04.048openalex-snapshot
Eigenstrain simulation of residual stresses induced by laser shock processing in a Ti6Al4V hip replacement
inferred← citeshttps://doi.org/10.1016/j.matdes.2023.111600openalex-snapshot
Toughness-improving design of lattice sandwich structures
inferred← citeshttps://doi.org/10.1016/j.mechmat.2014.12.001openalex-snapshot
Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement
inferred← citeshttps://doi.org/10.1016/j.mechmat.2019.103103openalex-snapshot
A constitutive model for Ti6Al4V considering the state of stress and strain rate effects
inferred← citeshttps://doi.org/10.1016/j.msea.2007.04.116openalex-snapshot
Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024-T3
inferred← citeshttps://doi.org/10.1016/j.msea.2014.05.006openalex-snapshot
On the calibration strategies of the Johnson–Cook strength model: Discussion and applications to experimental data
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2022.104740openalex-snapshot
Mechanical properties of functionally graded rotating lattice structures fabricated with SLM process
inferred← citeshttps://doi.org/10.1016/j.oceaneng.2024.118162openalex-snapshot
Deep-sea implosion of spherical pressure shell considering geometric imperfection
inferred← citeshttps://doi.org/10.1016/j.optlastec.2015.04.027openalex-snapshot
Random-type scanning patterns in laser shock peening without absorbing coating in 2024-T351 Al alloy: A solution to reduce residual stress anisotropy
inferred← citeshttps://doi.org/10.1016/j.optlastec.2022.107854openalex-snapshot
Digital shearography approach for stress intensity factors calculation in friction stir welded nugget of AA2024 aluminum alloy
inferred← citeshttps://doi.org/10.1016/j.optlastec.2022.107897openalex-snapshot
The effect of laser shock peening on surface integrity and high and very high cycle fatigue properties of 2024-T351 aluminum alloy
inferred← citeshttps://doi.org/10.1016/j.optlastec.2023.109674openalex-snapshot
An equivalent numerical model for calculating shot peening bending deformation based on the laser forming method
inferred← citeshttps://doi.org/10.1016/j.procir.2015.03.052openalex-snapshot
On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4V Using Three Types of Numerical Models of Orthogonal Cutting
inferred← citeshttps://doi.org/10.1016/j.procir.2019.04.057openalex-snapshot
Optimization-based procedure for the determination of the constitutive model coefficients used in machining simulations
inferred← citeshttps://doi.org/10.1016/j.procir.2020.01.028openalex-snapshot
Computational and experimental investigation of cutting tool geometry in machining titanium Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.procir.2023.03.048openalex-snapshot
Determination of the friction coefficients between uncoated WC-Co tools and L-PBF and wrought Ti-6Al-4V alloys for micro-milling simulations
inferred← citeshttps://doi.org/10.1016/j.proeng.2011.04.275openalex-snapshot
Measuring and modeling of low temperature Hopkinson tests
inferred← citeshttps://doi.org/10.1016/j.proeng.2011.04.312openalex-snapshot
Finite Element Analysis of Drilling of Titanium Alloy
inferred← citeshttps://doi.org/10.1016/j.proeng.2013.05.016openalex-snapshot
Hypervelocity Impact Response of Ti-6Al-4 V and Commercially Pure Titanium
inferred← citeshttps://doi.org/10.1016/j.proeng.2013.09.227openalex-snapshot
Finite Element Simulation of the Orthogonal Machining Process with Al 2024 T351 Aerospace Alloy
inferred← citeshttps://doi.org/10.1016/j.proeng.2013.11.003openalex-snapshot
An Empirical Model for the Ballistic Limit of Bi-layer Ceramic/metal Armour
inferred← citeshttps://doi.org/10.1016/j.proeng.2017.10.832openalex-snapshot
Reduction of springback in V-shaped parts using electromagnetic impulse calibration
inferred← citeshttps://doi.org/10.1016/j.promfg.2017.07.045openalex-snapshot
Effects of Vibration Assistance on Surface Residual Stress in Grinding of Ti6Al4V Alloy
inferred← citeshttps://doi.org/10.1016/j.simpat.2015.02.003openalex-snapshot
On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2021.128068openalex-snapshot
Influence of spray angle in cold spray deposition of Ti-6Al-4V coatings on Al6061-T6 substrates
inferred← citeshttps://doi.org/10.1016/j.triboint.2008.07.009openalex-snapshot
A coupled finite element and meshfree analysis of erosive wear
inferred← citeshttps://doi.org/10.1016/j.tws.2017.02.028openalex-snapshot
Ballistic resistance of 2024 aluminium plates against hemispherical, sphere and blunt nose projectiles
inferred← citeshttps://doi.org/10.1016/j.tws.2017.05.014openalex-snapshot
Ballistic impact response of high strength aluminium alloy 2014-T652 subjected to rigid and deformable projectiles
inferred← citeshttps://doi.org/10.1016/j.tws.2018.12.002openalex-snapshot
Characterization of progressive damage behaviour and failure mechanisms of carbon fibre reinforced aluminium laminates under three-point bending
inferred← citeshttps://doi.org/10.1016/j.tws.2022.109589openalex-snapshot
A two-experiment approach to physical modelling: damage and failure under high-rate loading
inferred← citeshttps://doi.org/10.1016/j.tws.2023.111052openalex-snapshot
Numerical study on debris cloud and channeling effect of honeycomb sandwich shields under hypervelocity impact
inferred← citeshttps://doi.org/10.1016/j.tws.2024.112685openalex-snapshot
Research on combined damage characteristics of underwater armor-piercing and explosion based on supercavitating projectile
inferred← citeshttps://doi.org/10.1016/j.tws.2025.113192openalex-snapshot
Characterization of the debris clouds produced by hypervelocity oblique impact of spherical projectiles on honeycomb sandwich shields
inferred← citeshttps://doi.org/10.1016/j.wear.2008.01.014openalex-snapshot
Finite element model of erosive wear on ductile and brittle materials
inferred← citeshttps://doi.org/10.1016/j.wear.2013.03.018openalex-snapshot
Finite element modelling of overlapping abrasive waterjet milled footprints
inferred← citeshttps://doi.org/10.1016/j.wear.2024.205504openalex-snapshot
A slip-line field model for independently characterizing shearing and ploughing effects in metal cutting processes
inferred← citeshttps://doi.org/10.1016/j.ymssp.2022.108839openalex-snapshot
Material piling up and spreading effects in the cutting processes with small feed rates
inferred← citeshttps://doi.org/10.1016/s1003-6326(16)64194-8openalex-snapshot
Flow stress prediction for hot deformation processing of 2024Al-T3 alloy
inferred← citeshttps://doi.org/10.1023/a:1023908426462openalex-snapshot
On the sensitivity of a class of finite-deformation high strainrate ballistic models to constitutive parameter uncertainty
inferred← citeshttps://doi.org/10.1051/epjconf/20122604017openalex-snapshot
Constitutive equations of a ballistic steel alloy as a function of temperature
inferred← citeshttps://doi.org/10.1051/matecconf/20167710005openalex-snapshot
Workpiece Machining Accuracy Prediction Based on Milling Simulation
inferred← citeshttps://doi.org/10.1061/(asce)0893-1321(2009)22:3(287)openalex-snapshot
Explicit Finite-Element Analysis of 2024-T3/T351 Aluminum Material under Impact Loading for Airplane Engine Containment and Fragment Shielding
inferred← citeshttps://doi.org/10.1063/1.3702890openalex-snapshot
High spatial resolution, high energy synchrotron x-ray diffraction characterization of residual strains and stresses in laser shock peened Inconel 718SPF alloy
inferred← citeshttps://doi.org/10.1063/1.5066858openalex-snapshot
Numerical analysis of shot peening parameters for fatigue life improvement
inferred← citeshttps://doi.org/10.1063/12.0028746openalex-snapshot
Finite element approaches for shear band modelling
inferred← citeshttps://doi.org/10.1063/5.0048610openalex-snapshot
Measurement and characterization of nanosecond laser driven shockwaves utilizing photon Doppler velocimetry
inferred← citeshttps://doi.org/10.1063/5.0285834openalex-snapshot
Failure mechanisms of titanium alloy cylindrical pressure hulls under combined hydrodynamic pressure fields and implosion shock loading
inferred← citeshttps://doi.org/10.1080/10402004.2020.1755757openalex-snapshot
Evaluation of an Adhesive Friction Coefficient under Extreme Contact Conditions and Its Application to the Machining Process
inferred← citeshttps://doi.org/10.1080/15376494.2015.1047477openalex-snapshot
Experimental and numerical study of the effect of micro-structure on the rate-sensitivity of cellular foam
inferred← citeshttps://doi.org/10.1080/15376494.2021.1933659openalex-snapshot
Effect of metal type on the energy absorption of fiber metal laminates under low-velocity impact
inferred← citeshttps://doi.org/10.1080/17445302.2025.2462567openalex-snapshot
Impact of pressure hull implosion on ultra-high pressure chambers
inferred← citeshttps://doi.org/10.1108/17579861211264361openalex-snapshot
Simulation‐based crack growth mitigation through optimum laser peened residual stress
inferred← citeshttps://doi.org/10.1115/1.2712471openalex-snapshot
Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting
inferred← citeshttps://doi.org/10.1115/1.2953071openalex-snapshot
Simulation of a New Solid State Joining Process Using Single-Shoulder Two-Pin Tool
inferred← citeshttps://doi.org/10.1115/imece2005-82693openalex-snapshot
Dynamic Behavior Characterization of Lead at High Strain Rates Using High Speed Photography for Finite Element Simulation
inferred← citeshttps://doi.org/10.1134/s0010508217030169openalex-snapshot
Spallation affected fracture pattern of a titanium alloy plate subjected to linear shaped charge jet penetration
inferred← citeshttps://doi.org/10.1140/epjst/e2012-01589-yopenalex-snapshot
Development of fibre-metal laminates for improved impact performance
inferred← citeshttps://doi.org/10.1155/2021/8879874openalex-snapshot
Effect of Bird Yaw/Pitch Angles on Soft Impact Damage of a Fan Assembly
inferred← citeshttps://doi.org/10.1177/00219983251313875openalex-snapshot
Investigation into high-speed impact response of composite sandwich structures
inferred← citeshttps://doi.org/10.1177/10567895261469311openalex-snapshot
Integrated geometric refinement of Ti-6Al-4V containment casings balancing mass reduction and constitutive sensitivity under impact loading
inferred← citeshttps://doi.org/10.1177/1464420713489616openalex-snapshot
Low-velocity impact response of fiber-metal laminates – A theoretical approach
inferred← citeshttps://doi.org/10.1177/2041419619860533openalex-snapshot
An optimization scheme for a multilayer armour module against 7.62 mm armour piercing projectile
inferred← citeshttps://doi.org/10.1179/026708409x12490360425846openalex-snapshot
Three-dimensional FEM analysis of laser shock peening of aluminium alloy 2024-T351 thin sheets
inferred← citeshttps://doi.org/10.1179/1743284711y.0000000087openalex-snapshot
Modelling of entire friction stir welding process by explicit finite element method
inferred← citeshttps://doi.org/10.1299/mej.17-00087openalex-snapshot
Evaluation of the effect of the point angle and angle of incidence of a metal anchor on its docking state in a satellite structure for space debris mitigation
inferred← citeshttps://doi.org/10.1557/s43578-025-01677-6openalex-snapshot
Mechanical properties assessment for a titanium alloy plate lattice: Finite element and analytical studies
inferred← citeshttps://doi.org/10.21203/rs.3.rs-2051569/v1openalex-snapshot
A 3D FEM-based model of laser heating and machining for selection of process parameters and scanning path in laser-assisted machining of Ti6Al4V
inferred← citeshttps://doi.org/10.21595/vp.2016.17479openalex-snapshot
Simulation of chip-formation by a single grain of pyramid shape
inferred← citeshttps://doi.org/10.2298/tsci210216186vopenalex-snapshot
Thermo-mechanical analysis of linear welding stage in friction stir welding: Influence of welding parameters
inferred← citeshttps://doi.org/10.2298/tsci220621162vopenalex-snapshot
Influence of temperature and plastic deformation on AA2024 T3 friction stir welded joint microstructure
inferred← citeshttps://doi.org/10.2322/jjsass.51.354openalex-snapshot
Vertical Drop Test of a YS-11 Fuselage Section
inferred← citeshttps://doi.org/10.2322/tjsass.68.178openalex-snapshot
Numerical Analysis of the Effects of Harpoon Tip Shape and Friction on Penetration Behavior when Capturing Space Debris
inferred← citeshttps://doi.org/10.3390/aerospace8100281openalex-snapshot
Analytical and FEM Analyses of High-Speed Impact Behaviour of Al 2024 Alloy
inferred← citeshttps://doi.org/10.3390/app15158535openalex-snapshot
Investigation of Titanium Alloy Cutting Dynamics in Thin-Layer Machining
inferred← citeshttps://doi.org/10.3390/app152111714openalex-snapshot
Numerical Assessment of Localized Damage in Pipe-on-Wall Impact Under Pipe Whip Failure Conditions
inferred← citeshttps://doi.org/10.3390/coatings8090327openalex-snapshot
Influence of Particle Velocity When Propelled Using N2 or N2-He Mixed Gas on the Properties of Cold-Sprayed Ti6Al4V Coatings
inferred← citeshttps://doi.org/10.3390/jmmp5020056openalex-snapshot
Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses
inferred← citeshttps://doi.org/10.3390/ma12182946openalex-snapshot
Ballistic Behavior of Oblique Ceramic Composite Structure against Long-Rod Tungsten Projectiles
inferred← citeshttps://doi.org/10.3390/ma13173886openalex-snapshot
Effect of the Layer Sequence on the Ballistic Performance and Failure Mechanism of Ti6Al4V/CP-Ti Laminated Composite Armor
inferred← citeshttps://doi.org/10.3390/ma16216858openalex-snapshot
The Effect of Viscous Drag on the Maximum Residual Stresses Achievable in High-Yield-Strength Materials in Laser Shock Processing
inferred← citeshttps://doi.org/10.3390/ma18184347openalex-snapshot
Effect of Water Film Induced by Wet Shot Peening on Dimple Size and Residual Stress Distribution
inferred← citeshttps://doi.org/10.3390/math9030274openalex-snapshot
Modeling and Simulation Techniques Used in High Strain Rate Projectile Impact
inferred← citeshttps://doi.org/10.3390/met10010093openalex-snapshot
Finite Element Analysis of Laser Peening of Thin Aluminum Structures
inferred← citeshttps://doi.org/10.3390/met11010102openalex-snapshot
Numerical Analysis of Serrated Chip Formation Mechanism with Johnson-Cook Parameters in Micro-Cutting of Ti6Al4V
inferred← citeshttps://doi.org/10.3390/met12060976openalex-snapshot
Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V
inferred← citeshttps://doi.org/10.3390/met14010098openalex-snapshot
The Effects of Strain Rate and Anisotropy on the Formability and Mechanical Behaviour of Aluminium Alloy 2024-T3
inferred← citeshttps://doi.org/10.3390/met15040445openalex-snapshot
The Key Process Factors in Prestressed Laser Peen Forming and the Design of Parameters Through an Artificial Neural Network
inferred← citeshttps://doi.org/10.3390/met8060396openalex-snapshot
A New Experimental and Numerical Framework for Determining of Revised J-C Failure Parameters
inferred← citeshttps://doi.org/10.3390/met9111189openalex-snapshot
Experimental and Numerical Study on Microstructure and Mechanical Properties of Ti-6Al-4V/Al-1060 Explosive Welding
inferred← citeshttps://doi.org/10.3390/mi15121458openalex-snapshot
Determination of the Minimum Uncut Chip Thickness of Ti-6Al-4V Titanium Alloy Based on Dead Metal Zone
inferred← citeshttps://doi.org/10.3390/polym13040492openalex-snapshot
Thermal Delamination Modelling and Evaluation of Aluminium–Glass Fibre-Reinforced Polymer Hybrid
inferred← citeshttps://doi.org/10.3390/s24072324openalex-snapshot
Cyber–Physical Systems for High-Performance Machining of Difficult to Cut Materials in I5.0 Era—A Review
showing the first 200 of 216 · page through all 216
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.