On the public citation graph

Engineering approach for elastic-plastic fracture analysis

https://doi.org/10.2172/6068291
0 signed · 1018 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4678055openalex-extracted
A Dnn-Based Method to Predict J-Integral for Surface Cracked Plates Under Biaxial Loading
inferred← citeshttps://doi.org/10.1002/9780470610794.ch29openalex-snapshot
J‐Integral and CMOD for Cracked Cylinders
inferred← citeshttps://doi.org/10.1002/9783433607633.ch11openalex-snapshot
Bewertung und Instandsetzung von Altstahlkonstruktionen
inferred← citeshttps://doi.org/10.1002/9783433611111.ch8openalex-snapshot
Bewertung und Instandsetzung von Altstahlkonstruktionen
inferred← citeshttps://doi.org/10.1002/9783527603978.mst0059openalex-snapshot
Fracture Mechanisms
inferred← citeshttps://doi.org/10.1002/masy.19991470122openalex-snapshot
Yielding and fracture in crosslinked epoxies
inferred← citeshttps://doi.org/10.1002/mawe.19820130506openalex-snapshot
Anwendbarkeit bruchmechanischer Methoden bei hohen Temperaturen
inferred← citeshttps://doi.org/10.1002/mawe.19870181109openalex-snapshot
Kriechrißfortschrittsverhalten des Stahles 28 CrMoNiV 49
inferred← citeshttps://doi.org/10.1002/mawe.19890201111openalex-snapshot
Untersuchungen zum Einfluß der Probendicke auf das Verformungs‐ und Bruchverhalten bauteilähnlicher Großzugproben
inferred← citeshttps://doi.org/10.1002/mawe.19930241006openalex-snapshot
Langzeitiges Kriechrißverhalten kennzeichnender Kraftwerksstähle
inferred← citeshttps://doi.org/10.1002/mawe.19960270104openalex-snapshot
Ermüdungsrißwachstum in Kerben
inferred← citeshttps://doi.org/10.1002/mawe.19960270312openalex-snapshot
Numerisch ermittelter Parameter C* zur Beschreibung des Kriechrißverhaltens
inferred← citeshttps://doi.org/10.1002/mawe.19980291110openalex-snapshot
Versagen von Keramik im Hochtemperaturbereich
inferred← citeshttps://doi.org/10.1002/pc.24612openalex-snapshot
Evolution of the strain energy release rate during ductile or brittle failure in woven‐ply reinforced thermoplastic laminates under high temperature conditions
inferred← citeshttps://doi.org/10.1002/pen.24691openalex-snapshot
Effects of recycled HDPE and nanoclay on stress cracking of HDPE by correlating Jc with slow crack growth
inferred← citeshttps://doi.org/10.1002/srin.198500604openalex-snapshot
Anwendung bruchmechanischer Methoden auf Zugproben mit Mittenriß
inferred← citeshttps://doi.org/10.1002/srin.198901696openalex-snapshot
Kriechrißverhalten typischer Kraftwerksbaustähle
inferred← citeshttps://doi.org/10.1002/srin.199000348openalex-snapshot
Crack growth in welded turbine materials at elevated temperatures
inferred← citeshttps://doi.org/10.1002/srin.199000390openalex-snapshot
Fracture mechanics investigations with respect to the use of steels
inferred← citeshttps://doi.org/10.1002/srin.199000392openalex-snapshot
Untersuchungen zum Einfluß des Gefüges auf bruchmechanische Kennwerte
inferred← citeshttps://doi.org/10.1002/srin.199701176openalex-snapshot
Application of the fracture mechanics safety analysis to structural steel sections
inferred← citeshttps://doi.org/10.1002/srin.199801474openalex-snapshot
Some aspects of fracture mechanics research during the last 25 years
inferred← citeshttps://doi.org/10.1002/stab.201710515openalex-snapshot
Zum Sprödbruch alter Baustähle
inferred← citeshttps://doi.org/10.1002/stab.201770805openalex-snapshot
Zur Beurteilung der Sprödbruchgefährdung gelochter Stahltragwerke aus Flussstahl
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_120openalex-snapshot
Fatigue Crack Growth at Notches Considering Plasticity Induced Closure
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_128openalex-snapshot
An Experimental Study of Tearing-Fatigue Interaction
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_202openalex-snapshot
Modified Key-Curve-Method for Determination of Dynamic Crack Resistance Curves
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_237openalex-snapshot
Analysis of Creep Crack Initiation and Growth in Laboratory Specimens
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_258openalex-snapshot
Key Curve Methods for Dynamic Fracture Mechanics of Cast Iron
inferred← citeshttps://doi.org/10.1007/1-4020-4972-2_526openalex-snapshot
Some Aspects of Engineering Approach to Structural Integrity Assessment
inferred← citeshttps://doi.org/10.1007/1-4020-7861-7_7openalex-snapshot
Plastic Fracture Mechanics
inferred← citeshttps://doi.org/10.1007/3-540-26620-8_36openalex-snapshot
Werkstoff- und Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/3-540-26620-8_43openalex-snapshot
Spezielle Literatur
inferred← citeshttps://doi.org/10.1007/978-0-387-84876-1_12openalex-snapshot
Risk Analysis for Pipeline Assets—The Use of Models for Failure Prediction in Plastics Pipelines
inferred← citeshttps://doi.org/10.1007/978-1-4020-6526-2_2openalex-snapshot
Application of Sintap to the Failure Assessment of Gas Pipes
inferred← citeshttps://doi.org/10.1007/978-1-4020-6526-2_4openalex-snapshot
Failure of Cylindrical Shells: Numerical and Experimental Study
inferred← citeshttps://doi.org/10.1007/978-1-4612-1740-4_6openalex-snapshot
Plastic treatment of discontinuities: Fully plastic treatment and large deformation correction
inferred← citeshttps://doi.org/10.1007/978-1-4612-1740-4_7openalex-snapshot
Plastic treatment of discontinuities: Elastic-plastic treatment
inferred← citeshttps://doi.org/10.1007/978-1-4613-0155-4_2openalex-snapshot
Structural Integrity Assessment: The Relevant Loading Evaluation
inferred← citeshttps://doi.org/10.1007/978-1-4613-3787-4_11openalex-snapshot
High Rate Deformation in the Field of a Crack
inferred← citeshttps://doi.org/10.1007/978-1-4615-1771-9_6openalex-snapshot
Probabilistic Fracture Mechanics
inferred← citeshttps://doi.org/10.1007/978-3-030-66111-3_12openalex-snapshot
Structural Identification
inferred← citeshttps://doi.org/10.1007/978-3-032-23081-2_14openalex-snapshot
Pressure Vessels and Piping Integrity Assessment
inferred← citeshttps://doi.org/10.1007/978-3-032-23081-2_16openalex-snapshot
Stress Intensity Factor, J-Integral and Fully Plastic Solutions for Selected Configurations
inferred← citeshttps://doi.org/10.1007/978-3-319-07167-1_21openalex-snapshot
Probabilistic Approach of Safety Factor from Failure Assessment Diagram
inferred← citeshttps://doi.org/10.1007/978-3-319-21467-2_2openalex-snapshot
Experimental and Numerical Fracture Mechanics—An Individually Dyed History
inferred← citeshttps://doi.org/10.1007/978-3-319-24999-5_7openalex-snapshot
Elastic-Plastic Fracture Mechanics
inferred← citeshttps://doi.org/10.1007/978-3-319-62752-6_5openalex-snapshot
Elastic-Plastic Fracture Mechanics
inferred← citeshttps://doi.org/10.1007/978-3-319-70365-7_21openalex-snapshot
Assessment of Danger Due to Cracks in Structural Elements of Different Shapes and Geometry
inferred← citeshttps://doi.org/10.1007/978-3-540-68191-5_5openalex-snapshot
Werkstofftechnik
inferred← citeshttps://doi.org/10.1007/978-3-642-17306-6_134openalex-snapshot
Werkstoff- und Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/978-3-642-30740-9_4openalex-snapshot
Elastic-Plastic Fatigue Crack Growth
inferred← citeshttps://doi.org/10.1007/978-3-642-38891-0_34openalex-snapshot
Werkstoff- und Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/978-3-642-39412-6_134openalex-snapshot
Werkstoff- und Bauteileigenschaften Werkstoffeigenschaften Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/978-3-642-51710-5_9openalex-snapshot
Hochtemperaturverhalten
inferred← citeshttps://doi.org/10.1007/978-3-642-61381-4_86openalex-snapshot
A Study of Time Dependent Crack Growth at Room Temperature
inferred← citeshttps://doi.org/10.1007/978-3-642-79654-8_396openalex-snapshot
Stresses Near the Free Edge of the Interface in a Dissimilar Materials Joint with Elastic-plastic Material Behaviour
inferred← citeshttps://doi.org/10.1007/978-3-642-79654-8_7openalex-snapshot
Object-Oriented System for Evaluation of Fracture Mechanics Parameters of Linear and Nonlinear 3D Cracks
inferred← citeshttps://doi.org/10.1007/978-3-642-82818-8_1openalex-snapshot
Numerical Evaluation of Crack Tip Opening Displacements: 2D and 3D Applications
inferred← citeshttps://doi.org/10.1007/978-3-642-82818-8_15openalex-snapshot
The Use of CTOD Methods in Fitness for Purpose Analysis
inferred← citeshttps://doi.org/10.1007/978-3-642-84455-3_31openalex-snapshot
Creep Life Estimates for Defective Structures
inferred← citeshttps://doi.org/10.1007/978-3-642-84455-3_39openalex-snapshot
Theoretical, Experimental and Numerical Investigations of Creep Crack Growth
inferred← citeshttps://doi.org/10.1007/978-3-662-54805-9_34openalex-snapshot
Werkstoff- und Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/978-3-662-59711-8_29openalex-snapshot
Werkstoff- und Bauteileigenschaften
inferred← citeshttps://doi.org/10.1007/978-3-7091-2516-8_4openalex-snapshot
High Temperature Defect Assessment Procedures
inferred← citeshttps://doi.org/10.1007/978-90-481-2792-4_4openalex-snapshot
Procedures For Structure Integrity Assessment
inferred← citeshttps://doi.org/10.1007/978-90-481-2792-4_8openalex-snapshot
Safe and Reliable Design Methods for Metallic Components and Structures Design Methods
inferred← citeshttps://doi.org/10.1007/978-94-007-2595-9_7openalex-snapshot
Elastic Plastic Fracture: Crack Tip Fields
inferred← citeshttps://doi.org/10.1007/978-94-007-2595-9_8openalex-snapshot
Elastic Plastic Fracture: Energy and Applications
inferred← citeshttps://doi.org/10.1007/978-94-007-6680-8_3openalex-snapshot
Basics of Fracture Mechanics
inferred← citeshttps://doi.org/10.1007/978-94-009-1117-8_2openalex-snapshot
Stress Redistribution Effects on Creep Crack Growth
inferred← citeshttps://doi.org/10.1007/978-94-009-1714-9_2openalex-snapshot
Creep Behaviour of Engineering Alloys
inferred← citeshttps://doi.org/10.1007/978-94-009-2277-8_20openalex-snapshot
The J Integral Approach in Elastic-Plastic Fatigue Crack Propagation
inferred← citeshttps://doi.org/10.1007/978-94-009-2277-8_44openalex-snapshot
Interaction Between Fatigue Crack Growih, Yielding and Nonlinearly Visoous Material Response
inferred← citeshttps://doi.org/10.1007/978-94-009-2558-8_4openalex-snapshot
Elastic-plastic fracture mechanics
inferred← citeshttps://doi.org/10.1007/978-94-009-2558-8_8openalex-snapshot
Geometry factors
inferred← citeshttps://doi.org/10.1007/978-94-009-3459-7_101openalex-snapshot
High Temperature Creep and Fatigue Crack Growth in Alloy 800H
inferred← citeshttps://doi.org/10.1007/978-94-009-3459-7_80openalex-snapshot
Low Cycle Fatigue on A 1CRMOV Steel: Damage Criteria And Life Prediction Methods Assessment
inferred← citeshttps://doi.org/10.1007/978-94-009-5380-2_14openalex-snapshot
Workshop 2: The EPRI* Method for Ductile Fracture Analysis
inferred← citeshttps://doi.org/10.1007/978-94-009-5380-2_16openalex-snapshot
Workshop 4 A J-Based Fracture Safe Estimation Procedure, EnJ., with Applications Including Estimation of the Maximum Load for Ductile Tearing.
inferred← citeshttps://doi.org/10.1007/978-94-009-5380-2_2openalex-snapshot
The J-Concept: Theoretical Basis And its Use in EPFM
inferred← citeshttps://doi.org/10.1007/978-94-009-5380-2_3openalex-snapshot
Case Studies on the Determination of Applied J-Values
inferred← citeshttps://doi.org/10.1007/978-94-009-6146-3_21openalex-snapshot
The Strain Hardening of Structural Steels with Different Yield Strengths and its Influence on the Materials Properties during Plastic Deformation
inferred← citeshttps://doi.org/10.1007/978-94-009-6146-3_24openalex-snapshot
Failure Assessment Diagrams and J Estimates: Validation for an Austenitic Steel
inferred← citeshttps://doi.org/10.1007/978-94-009-6146-3_25openalex-snapshot
Perspective on J-T Plots
inferred← citeshttps://doi.org/10.1007/978-94-009-6146-3_9openalex-snapshot
Fracture Mechanics in Structure Design
inferred← citeshttps://doi.org/10.1007/978-94-010-0880-8_3openalex-snapshot
Inclusions Effect on the Notch Behaviour of a Low-Alloy Tempered Steel
inferred← citeshttps://doi.org/10.1007/978-94-011-0561-3_7openalex-snapshot
Creep fracture
inferred← citeshttps://doi.org/10.1007/978-94-011-0561-3_8openalex-snapshot
Creep/fatigue/environmental interactions
inferred← citeshttps://doi.org/10.1007/978-94-011-4659-3_4openalex-snapshot
Scaling laws for elastoplastic fracture
inferred← citeshttps://doi.org/10.1007/978-94-011-5642-4_4openalex-snapshot
Finite Element Analysis of a Bi-Material Sent Specimen Under Elastic-plastic Loading
inferred← citeshttps://doi.org/10.1007/978-94-017-1771-7_4openalex-snapshot
Stress analysis of cracked bodies
inferred← citeshttps://doi.org/10.1007/978-94-017-1771-7_8openalex-snapshot
Practical applications
inferred← citeshttps://doi.org/10.1007/978-94-017-2444-9_10openalex-snapshot
Effect of microstructure degradation on creep crack growth
inferred← citeshttps://doi.org/10.1007/978-981-16-8724-2_25openalex-snapshot
Fracture Evaluation of a High-Pressure Gas Bottle by J-Integral Based Failure Assessment Diagram Using Ansys
inferred← citeshttps://doi.org/10.1007/bf00012361openalex-snapshot
Effect of cyclic overload on the crack growth behavior during hold period at elevated temperature
inferred← citeshttps://doi.org/10.1007/bf00012385openalex-snapshot
Characterization of creep-fatigue crack growth behavior under trapezoidal waveshape using C t -parameter
inferred← citeshttps://doi.org/10.1007/bf00012399openalex-snapshot
A simplified approach for ductile failure analysis of semi-elliptical surface cracks
inferred← citeshttps://doi.org/10.1007/bf00012425openalex-snapshot
Finite element analysis of creep fracture initiation in a model superalloy material
inferred← citeshttps://doi.org/10.1007/bf00012447openalex-snapshot
A method to estimate ?p factor for J measurement
inferred← citeshttps://doi.org/10.1007/bf00012473openalex-snapshot
The role of constraint on the calibration functions for the prediction of ductile fracture behavior in structural components
inferred← citeshttps://doi.org/10.1007/bf00012606openalex-snapshot
Plastic ?-factor (? p )
inferred← citeshttps://doi.org/10.1007/bf00013045openalex-snapshot
Application of load separation and normalization methods for polycarbonate materials
inferred← citeshttps://doi.org/10.1007/bf00013236openalex-snapshot
The effect of residual stresses on brittle and ductile fracture initiation predicted by micromechanical models
inferred← citeshttps://doi.org/10.1007/bf00017204openalex-snapshot
Consideration of primary creep at a stationary crack tip: Implications for the C t parameter
inferred← citeshttps://doi.org/10.1007/bf00018383openalex-snapshot
Effect of microstructure degradation on creep crack growth
inferred← citeshttps://doi.org/10.1007/bf00018479openalex-snapshot
Crack tip parameters for large scale yielding and low constraint configurations
inferred← citeshttps://doi.org/10.1007/bf00018869openalex-snapshot
A re-evaluation of criteria for J-controlled crack growth
inferred← citeshttps://doi.org/10.1007/bf00019612openalex-snapshot
The use of constraint-modified failure assessment lines in failure assessment diagrams
inferred← citeshttps://doi.org/10.1007/bf00019716openalex-snapshot
Time-dependent deformation and fracture of steel between 20�C and 400�C
inferred← citeshttps://doi.org/10.1007/bf00019721openalex-snapshot
On the combination of the boundary element method and nonlinear line-spring model
inferred← citeshttps://doi.org/10.1007/bf00019722openalex-snapshot
Elastic plastic behaviour investigation of externally, axially cracked cylinder
inferred← citeshttps://doi.org/10.1007/bf00019798openalex-snapshot
An experimental evaluation of the J-integral in 30 percent side-grooved three point bend [SE(B)] specimens
inferred← citeshttps://doi.org/10.1007/bf00019977openalex-snapshot
Elasto-Plastic fracture analysis for cracked ductile cylinders
inferred← citeshttps://doi.org/10.1007/bf00020693openalex-snapshot
Creep crack growth behavior in 316 stainless steel at 594�C (1100�F)
inferred← citeshttps://doi.org/10.1007/bf00028830openalex-snapshot
Applicability of the EPRI estimation scheme for the prediction of load-load line displacement behaviour and for single specimen J-R-curve determination
inferred← citeshttps://doi.org/10.1007/bf00032571openalex-snapshot
The load separation criterion and methodology in ductile fracture mechanics
inferred← citeshttps://doi.org/10.1007/bf00032573openalex-snapshot
Creep crack growth characterization of Type 316 stainless steel using miniature specimens
inferred← citeshttps://doi.org/10.1007/bf00032691openalex-snapshot
A note on the ductile fracture of single edge-notch tensile specimens loaded through frictionless pins
inferred← citeshttps://doi.org/10.1007/bf00034275openalex-snapshot
J-integral correlation of the initiation of slow crack growth in linear polyethylene
inferred← citeshttps://doi.org/10.1007/bf00034765openalex-snapshot
Study of the load-separation principle and a procedure to estimate ?p-factor for structures with different geometries
inferred← citeshttps://doi.org/10.1007/bf00034813openalex-snapshot
Determination of v-K-curves of hot-pressed silicon nitride at elevated temperatures
inferred← citeshttps://doi.org/10.1007/bf00034820openalex-snapshot
A new look at J-R curve analysis
inferred← citeshttps://doi.org/10.1007/bf00034821openalex-snapshot
Calculation of J from test records for the growing crack
inferred← citeshttps://doi.org/10.1007/bf00034903openalex-snapshot
Crack growth by grain boundary cavitation in the transient and extensive creep regimes
inferred← citeshttps://doi.org/10.1007/bf00035041openalex-snapshot
Transient crack-tip fields for mixed-mode power law creep
inferred← citeshttps://doi.org/10.1007/bf00035098openalex-snapshot
Characterization of near tip stress and deformation fields in creeping solids
inferred← citeshttps://doi.org/10.1007/bf00035107openalex-snapshot
Crack propagation behavior under creep conditions
inferred← citeshttps://doi.org/10.1007/bf00037172openalex-snapshot
R-curve thermodynamics revisited
inferred← citeshttps://doi.org/10.1007/bf00040855openalex-snapshot
A new model for characterizing primary creep damage
inferred← citeshttps://doi.org/10.1007/bf00044414openalex-snapshot
Creep crack growth in ductile, creep-resistant steels
inferred← citeshttps://doi.org/10.1007/bf00045895openalex-snapshot
Equations for cod blunting lines
inferred← citeshttps://doi.org/10.1007/bf00350280openalex-snapshot
Finite element analyses of three dimensional fully plastic solutions using quasi-nonsteady algorithm and tetrahedral elements
inferred← citeshttps://doi.org/10.1007/bf00569688openalex-snapshot
Experimental check of existing methods of fracture strength analysis
inferred← citeshttps://doi.org/10.1007/bf00772486openalex-snapshot
Interpolation formulas for strength calculations of ductile materials with cracks
inferred← citeshttps://doi.org/10.1007/bf00963462openalex-snapshot
On the void growth in C-Mn structural steel during plastic deformation
inferred← citeshttps://doi.org/10.1007/bf01898133openalex-snapshot
The leakage criterions of thin-wall pressure vessels, materials of missile and spacecraft
inferred← citeshttps://doi.org/10.1007/bf02317572openalex-snapshot
Ductile and brittle fracture analysis of surface flaws using CTOD
inferred← citeshttps://doi.org/10.1007/bf02320006openalex-snapshot
Significance of the load shift in single-edge notch tension tests
inferred← citeshttps://doi.org/10.1007/bf02325583openalex-snapshot
Experimental investigation of creep-crack-tip deformation using moiré interferometry
inferred← citeshttps://doi.org/10.1007/bf02486820openalex-snapshot
Defect assessment procedure based on ductile tearing process
inferred← citeshttps://doi.org/10.1007/bf02538903openalex-snapshot
Crack significance evaluation with special reference to welded structures
inferred← citeshttps://doi.org/10.1007/bf02656720openalex-snapshot
Subcritical intergranular crack growth rates and thresholds of Fe and Fe + Sb
inferred← citeshttps://doi.org/10.1007/bf02664669openalex-snapshot
Study of creep crack growth in 2618 and 8009 aluminum alloys
inferred← citeshttps://doi.org/10.1007/bf02665511openalex-snapshot
Investigations on the influence of internal nitridation on creep crack growth in alloy 800 H
inferred← citeshttps://doi.org/10.1007/bf02747284openalex-snapshot
Creep crack growth in power plant materials
inferred← citeshttps://doi.org/10.1007/bf02767440openalex-snapshot
Prediction of fracture toughness for heat-resistant steels considering specimen dimensions. Report 4. Fracture toughness after plastic prestraining of materials with cracks
inferred← citeshttps://doi.org/10.1007/bf02818935openalex-snapshot
Neural networks in computational mechanics
inferred← citeshttps://doi.org/10.1007/bf02833343openalex-snapshot
Role of segregated P and S in intergranular stress corrosion cracking of Ni
inferred← citeshttps://doi.org/10.1007/bf02833449openalex-snapshot
Mechanical and metallurgical properties of retired 3.5NiCrMoV low pressure steam turbine discs
inferred← citeshttps://doi.org/10.1007/bf03184768openalex-snapshot
Decomposition of interfacial crack driving forces in dissimilar joints
inferred← citeshttps://doi.org/10.1007/bf03222770openalex-snapshot
Predicting the life of high-temperature structural components in power plants
inferred← citeshttps://doi.org/10.1007/bf03266577openalex-snapshot
FITNET Fitness-for-Service Procedure: An Overview
inferred← citeshttps://doi.org/10.1007/s00419-015-1054-zopenalex-snapshot
A damage tolerance analysis for complex structures
inferred← citeshttps://doi.org/10.1007/s00419-018-1433-3openalex-snapshot
Analytical and numerical investigations of creep crack initiation considering the load-independent constraint parameter $${{\varvec{Q}}}^{*}$$ Q ∗
inferred← citeshttps://doi.org/10.1007/s004660050455openalex-snapshot
Limit analysis of cracked structures by mathematical programming and finite element technique
inferred← citeshttps://doi.org/10.1007/s10338-019-00078-7openalex-snapshot
Fracture Analysis of Cast Iron Materials with Cracks Based on Elastoplastic Extended Finite Element Method
inferred← citeshttps://doi.org/10.1007/s10483-006-0202-zopenalex-snapshot
A new cyclic J-integral for low-cycle fatigue crack growth
inferred← citeshttps://doi.org/10.1007/s10704-004-2550-2openalex-snapshot
Effect of biaxial loads on elastic-plastic J and crack tip constraint for cracked plates: finite element study
inferred← citeshttps://doi.org/10.1007/s10704-005-5825-3openalex-snapshot
A J-integral estimation method for C(T) specimens using the Common Format Equation
inferred← citeshttps://doi.org/10.1007/s10704-007-9097-yopenalex-snapshot
Elastic–plastic J and COD estimation schemes for 90° elbow with throughwall circumferential crack at intrados under in-plane opening moment
inferred← citeshttps://doi.org/10.1007/s10704-007-9105-2openalex-snapshot
Indirect measuring of crack growth by means of a key-curve-method in pre-cracked Charpy specimens made of nodular cast iron
inferred← citeshttps://doi.org/10.1007/s10704-007-9134-xopenalex-snapshot
J-integral evaluation for U- and V-blunt notches under Mode I loading and materials obeying a power hardening law
inferred← citeshttps://doi.org/10.1007/s10704-015-9994-4openalex-snapshot
Creep and creep–fatigue crack growth
inferred← citeshttps://doi.org/10.1007/s10853-022-07521-0openalex-snapshot
Effect of force ratio on creep-fatigue crack growth (CFCG) of P91 steel
inferred← citeshttps://doi.org/10.1007/s11003-006-0058-9openalex-snapshot
Fracture toughness of structural elements: The influence of the in-and out-of-plane constraints on fracture toughness
inferred← citeshttps://doi.org/10.1007/s11003-026-01043-9openalex-snapshot
Indicator of the crack growth resistance as one of the factors for the express analysis of damaged pipelines
inferred← citeshttps://doi.org/10.1007/s11223-014-9512-3openalex-snapshot
Fracture Resistance of Sheet Metals and Thin-Wall Structures. Part 1. Critical Review
inferred← citeshttps://doi.org/10.1007/s11661-016-3486-7openalex-snapshot
The Effect of Microstructural Variation on the Hydrogen Environment-Assisted Cracking of Monel K-500
inferred← citeshttps://doi.org/10.1007/s11665-018-3718-7openalex-snapshot
Investigation on Fracture Behavior of Grade 91 Steel at 300-550 °C
inferred← citeshttps://doi.org/10.1007/s11665-018-3811-yopenalex-snapshot
Evaluation of Plastic “Eta” Factor for Welds of SS316L(N) with High Strength Mismatch Ratio
inferred← citeshttps://doi.org/10.1007/s11665-020-05326-3openalex-snapshot
Experimental Investigation of Strain-Rate- and Temperature-Dependent Mechanical Properties of SA516Gr.70 Steel and Development of an Appropriate Material Model
inferred← citeshttps://doi.org/10.1007/s11837-020-04107-6openalex-snapshot
Multiscale Assessment of Deformation Induced by Hydrogen Environment-Assisted Cracking in a Peak-Aged Ni-Cu Superalloy
inferred← citeshttps://doi.org/10.1007/s12206-016-0834-xopenalex-snapshot
Prediction of fracture parameters of circumferential through-wall cracks in the interface between an elbow and a pipe under internal pressure
inferred← citeshttps://doi.org/10.1007/s12206-016-1113-6openalex-snapshot
Creep crack growth analysis using C t -parameter for internal circumferential and external axial surface cracks in a pressurized cylinder
inferred← citeshttps://doi.org/10.1007/s12206-024-0327-2openalex-snapshot
Crack-tip constraint analysis of cylinder structure with axial penetrating crack at outside surface
inferred← citeshttps://doi.org/10.1007/s12666-015-0756-9openalex-snapshot
Limit Load Equations for Miniature Single Edge Notched Tensile Specimens
inferred← citeshttps://doi.org/10.1007/s12666-016-0877-9openalex-snapshot
Mechanical and Damage Fields Ahead of a Stationary Crack in a Creeping Solid
inferred← citeshttps://doi.org/10.1007/s40799-024-00721-0openalex-snapshot
A Novel Method for Testing and Evaluating the Fatigue Life of Metal Vibration Absorber
inferred← citeshttps://doi.org/10.1007/s44492-026-00021-1openalex-snapshot
Crack growth and fracture characteristics of riveted dissimilar aluminum joints under mode I loading
inferred← citeshttps://doi.org/10.1016/0001-6160(87)90156-8openalex-snapshot
Controlling factors for crack growth under creep conditions
inferred← citeshttps://doi.org/10.1016/0010-938x(93)90070-wopenalex-snapshot
Predicted salt film formation effects on stage I stress corrosion cracking of anodically polarized nickel
inferred← citeshttps://doi.org/10.1016/0013-7944(84)90039-0openalex-snapshot
Viscoplastic analyses of a compact tension specimen in mode I loading
inferred← citeshttps://doi.org/10.1016/0013-7944(84)90129-2openalex-snapshot
Incremental path-independent integrals in inelastic and dynamic fracture mechanics
inferred← citeshttps://doi.org/10.1016/0013-7944(85)90046-3openalex-snapshot
Further studies on elastic-plastic stable fracture utilizing the integral
inferred← citeshttps://doi.org/10.1016/0013-7944(85)90141-9openalex-snapshot
Treatment of material laws for approximate estimation methods
inferred← citeshttps://doi.org/10.1016/0013-7944(86)90008-1openalex-snapshot
The treatment of thermal and residual stresses in fracture assessments
inferred← citeshttps://doi.org/10.1016/0013-7944(86)90094-9openalex-snapshot
The plane-strain, work-hardening response of an internally pressurized cylinder containing surface flaws
inferred← citeshttps://doi.org/10.1016/0013-7944(86)90161-xopenalex-snapshot
A combined numerical/experimental study of ductile crack growth after a large unloading, using and CTOA criteria
inferred← citeshttps://doi.org/10.1016/0013-7944(86)90162-1openalex-snapshot
Studies on creep crack growth using the
inferred← citeshttps://doi.org/10.1016/0013-7944(86)90270-5openalex-snapshot
Application of the critical load assessment method for stable crack growth analysis
inferred← citeshttps://doi.org/10.1016/0013-7944(87)90016-6openalex-snapshot
estimates for cracks in infinite bodies
inferred← citeshttps://doi.org/10.1016/0013-7944(87)90180-9openalex-snapshot
Fracture mechanics and creep crack growth of %Mo steel with and without prior exposure to creep conditions
inferred← citeshttps://doi.org/10.1016/0013-7944(87)90199-8openalex-snapshot
Fracture toughness of two Ni-Fe-Cr alloys
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90008-2openalex-snapshot
Three-dimensional elastic-plastic calculations for semielliptical surface cracks in a tensile plate
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90053-7openalex-snapshot
Deformation analysis of the local field in the vicinity of a stably growing crack-tip
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90058-6openalex-snapshot
Heat-to-heat variations in the fracture toughness of austenitic stainless steels
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90081-1openalex-snapshot
A simple test method for determining of mild steel by means of single side-grooved precracked charpy-type specimen
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90095-1openalex-snapshot
A fracture mechanics criterion for thermal-mechanical fatigue crack growth of gas turbine materials
inferred← citeshttps://doi.org/10.1016/0013-7944(88)90170-1openalex-snapshot
A structural approach to the calculation of
showing the first 200 of 1018 · page through all 1018
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.