On the public citation graph

Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures

0 signed · 73 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s00339-016-0428-6openalex-snapshot

Influence of processing parameters on laser penetration depth and melting/re-melting densification during selective laser melting of aluminum alloy

inferredcites →https://doi.org/10.1016/j.actamat.2012.11.052openalex-snapshot

Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder

inferredcites →https://doi.org/10.1016/j.addma.2014.08.001openalex-snapshot

Reducing porosity in AlSi10Mg parts processed by selective laser melting

inferredcites →https://doi.org/10.1016/j.apsusc.2017.02.215openalex-snapshot

The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior

inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.067openalex-snapshot

3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam

inferredcites →https://doi.org/10.1016/j.ijimpeng.2013.04.007openalex-snapshot

Drop weight impact behaviour of sandwich panels with metallic micro lattice cores

inferredcites →https://doi.org/10.1016/j.ijimpeng.2017.02.007openalex-snapshot

Impact response of additively manufactured metallic hybrid lattice materials

inferredcites →https://doi.org/10.1016/j.ijimpeng.2017.12.001openalex-snapshot

Experimental study on the dynamic behaviour of aluminium foam sandwich plates under single and repeated impacts at low temperature

inferredcites →https://doi.org/10.1016/j.ijmachtools.2018.06.003openalex-snapshot

Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review

inferredcites →https://doi.org/10.1016/j.matdes.2011.07.067openalex-snapshot

Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior

inferredcites →https://doi.org/10.1016/j.matdes.2012.12.016openalex-snapshot

Finite element analyses of low-velocity impact damage of foam sandwiched composites with different ply angles face sheets

inferredcites →https://doi.org/10.1016/j.matdes.2013.10.027openalex-snapshot

Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting

inferredcites →https://doi.org/10.1016/j.matdes.2016.02.127openalex-snapshot

Selective laser melting (SLM) of AlSi12Mg lattice structures

inferredcites →https://doi.org/10.1016/j.msea.2012.08.010openalex-snapshot

Production of high porosity metal foams using EPS beads as space holders

inferredcites →https://doi.org/10.1016/j.msea.2013.11.038openalex-snapshot

Manufacture by selective laser melting and mechanical behavior of commercially pure titanium

inferredcites →https://doi.org/10.1016/j.msea.2015.01.031openalex-snapshot

Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

inferredcites →https://doi.org/10.1016/j.optmat.2014.11.020openalex-snapshot

Effect of matte coating on 3D optical measurement accuracy

inferredcites →https://doi.org/10.1016/j.phpro.2012.10.059openalex-snapshot

Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting

inferredcites →https://doi.org/10.1016/j.scriptamat.2017.07.020openalex-snapshot

Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting

inferredcites →https://doi.org/10.1088/0022-3727/49/13/135501openalex-snapshot

On the role of processing parameters in thermal behavior, surface morphology and accuracy during laser 3D printing of aluminum alloy

inferredcites →https://doi.org/10.1108/rpj-10-2012-0096openalex-snapshot

Optimisation of process parameters for lattice structures

inferredcites →https://doi.org/10.17973/mmsj.2015_12_201547openalex-snapshot

IMPACT RESISTANCE OF LATTICE STRUCTURE MADE BY SELECTIVE LASER MELTING FROM AlSi12 ALLOY

inferredcites →https://doi.org/10.17973/mmsj.2016_12_2016186openalex-snapshot

IMPACT RESISTANCE OF DIFFERENT TYPES OF LATTICE STRUCTURES MANUFACTURED BY SLM

inferredcites →https://doi.org/10.3390/ma11020298openalex-snapshot

Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4626264openalex-extracted

Mechanical Properties Evaluation Based on Variable Gradient of Bcc-Based Lattice Structure Prepared by L-Pbf

inferred← citeshttps://doi.org/10.1002/adem.202000611openalex-snapshot

A Review of the Selective Laser Melting Lattice Structures and Their Numerical Models

inferred← citeshttps://doi.org/10.1002/adem.202201850openalex-snapshot

An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures

inferred← citeshttps://doi.org/10.1002/adem.202402625openalex-snapshot

Influence of Laser Strategies on Performance of Lattice Structures from Magnesium Alloy WE43 Produced by Laser Beam Powder Bed Fusion

inferred← citeshttps://doi.org/10.1002/adem.202501594openalex-snapshot

Surface Quality and Mechanical Property Control of Laser Powder Bed Fusion Additively Manufactured Ti–6Al–4V Hollow‐Strut Lattice Metamaterials

inferred← citeshttps://doi.org/10.1002/jbm.a.37709openalex-snapshot

Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization

inferred← citeshttps://doi.org/10.1007/978-3-030-15232-1_3openalex-snapshot

Additive Manufacturing Processes and Materials for Metallic Microlattice Structures Using Selective Laser Melting, Electron Beam Melting and Binder Jetting

inferred← citeshttps://doi.org/10.1007/978-3-032-19524-1_38openalex-snapshot

Experimental Investigations on the Influence of Geometric Features and Process Parameters on the PBF-LB/M Manufacturability of Strut-Based Lattice Structures

inferred← citeshttps://doi.org/10.1007/s00170-023-12712-3openalex-snapshot

Laser powder bed fusion additively manufactured thin lightweight Ti6Al4V features: an experimental investigation on the influence of powder feedstock, geometry, and process parameters on property/quality

inferred← citeshttps://doi.org/10.1007/s00170-025-15976-zopenalex-snapshot

Laser-based powder bed fusion additive manufacturing of thinner walls through re-melting

inferred← citeshttps://doi.org/10.1007/s00707-022-03443-9openalex-snapshot

Analysis and optimization of strut-based lattice structures by simplified finite element method

inferred← citeshttps://doi.org/10.1007/s11665-024-09662-6openalex-snapshot

Mechanical Properties Evaluation Based on the Variable Gradient of Body-Centered-Cubic-Based Lattice Structure Prepared by Laser Powder Bed Fusion

inferred← citeshttps://doi.org/10.1007/s11665-025-12782-2openalex-snapshot

Effect of Different Nodal Corner Radii on the Compressive Properties of L-PBF Molded Ti-6Al-4V Body-Centered Cubic Lattice Structure

inferred← citeshttps://doi.org/10.1016/b978-0-12-818411-0.00017-3openalex-snapshot

Selective laser melting

inferred← citeshttps://doi.org/10.1016/b978-0-443-28820-3.00009-3openalex-snapshot

Additive manufacturing of biomedical metal alloys

inferred← citeshttps://doi.org/10.1016/j.addlet.2025.100350openalex-snapshot

Comparing geometry and mechanical performance of as built and Hirtisation® treated Al-Cu-Mg-Ag-Ti-B-Si-Fe rhombic dodecahedron lattices manufactured by laser powder bed fusion

inferred← citeshttps://doi.org/10.1016/j.addma.2023.103748openalex-snapshot

Morphological induced improvements in the bulk mechanical properties of chemically etched additively manufactured Ti-6Al-4V micro-struts

inferred← citeshttps://doi.org/10.1016/j.apmt.2024.102551openalex-snapshot

Finetuning design and process conditions to minimise manufacturing deviations in strut-based metal lattice structures produced by Laser Powder Bed Fusion

inferred← citeshttps://doi.org/10.1016/j.bea.2025.100148openalex-snapshot

Mechanical and microstructural properties of additively manufactured porous titanium alloy constructs for orthopaedic and maxillofacial reconstruction

inferred← citeshttps://doi.org/10.1016/j.bioactmat.2021.12.027openalex-snapshot

Additively manufactured metallic biomaterials

inferred← citeshttps://doi.org/10.1016/j.cjme.2025.100040openalex-snapshot

Mechanical properties of olive bionic lattice structure prepared by LPBF

inferred← citeshttps://doi.org/10.1016/j.compstruct.2021.113610openalex-snapshot

Modeling of the effect of local material imperfection to the structural mechanical property variability of 2D finite-size cellular structures

inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2022.107093openalex-snapshot

Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures

inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.11.035openalex-snapshot

Effect of high-temperature preheating on pure copper thick-walled samples processed by laser powder bed fusion

inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.12.006openalex-snapshot

Contour laser strategy and its benefits for lattice structure manufacturing by selective laser melting technology

inferred← citeshttps://doi.org/10.1016/j.jmbbm.2024.106693openalex-snapshot

Feature size specific processing parameters for additively manufactured Ti-6Al-4V micro-strut lattices

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116426openalex-snapshot

Microstructure and micromechanical properties of microcellular AlSi10Mg produced via LPBF

inferred← citeshttps://doi.org/10.1016/j.matdes.2022.110415openalex-snapshot

Experimental and numerical characterization of pure copper heat sinks produced by laser powder bed fusion

inferred← citeshttps://doi.org/10.1016/j.matdes.2023.111796openalex-snapshot

Microstructure and mechanical properties of additively manufactured AlSi10Mg lattice structures from single contour exposure

inferred← citeshttps://doi.org/10.1016/j.msea.2021.141034openalex-snapshot

Investigation of porosity, texture, and deformation behavior using high energy X-rays during in-situ tensile loading in additively manufactured 316L stainless steel

inferred← citeshttps://doi.org/10.1016/j.optlastec.2026.115460openalex-snapshot

Laser parameters and efficiency in thin-wall laser powder bed fusion: an enthalpy-based pulse spacing strategy

inferred← citeshttps://doi.org/10.1016/j.procir.2021.11.141openalex-snapshot

Parametric compensation scheme for increasing the geometrical accuracy of lattice structures in medical implants produced by powder bed fusion

inferred← citeshttps://doi.org/10.1016/j.procir.2025.02.278openalex-snapshot

Laser powder bed fusion of 3D metamaterials for energy absorption

inferred← citeshttps://doi.org/10.1038/s41598-022-22292-zopenalex-snapshot

Fabrication of a lattice structure with periodic open pores through three-dimensional printing for bone ingrowth

inferred← citeshttps://doi.org/10.1088/1361-651x/ad3a00openalex-snapshot

The effect of geometrical parameters on dimensional deviation in LPBF produced TPMS lattices: a numerical simulation based study

inferred← citeshttps://doi.org/10.1088/1361-665x/ab0b8eopenalex-snapshot

Structured magnetic circuit for magnetorheological damper made by selective laser melting technology

inferred← citeshttps://doi.org/10.1108/rpj-01-2022-0036openalex-snapshot

Ti6Al4V scaffolds fabricated by laser powder bed fusion with hybrid volumetric energy density

inferred← citeshttps://doi.org/10.1108/rpj-05-2023-0164openalex-snapshot

Investigation on selective laser-melted AlSi10Mg micro-struts: influence of processing parameters on dimensional accuracy, molten pool morphology and microhardness

inferred← citeshttps://doi.org/10.1177/14644207211012726openalex-snapshot

Fabrication defects and limitations of AlSi10Mg lattice structures manufactured by selective laser melting

inferred← citeshttps://doi.org/10.18297/etd/3545openalex-snapshot

Modeling and analysis for unit cell size, material anisotropy and material imperfection effects of cellular structures fabricated by powder bed fusion additive manufacturing.

inferred← citeshttps://doi.org/10.2464/jilm.72.191openalex-snapshot

Observed geometrical imperfection and the mechanical properties of lattice structures produced by powder bed fusion (PBF) process

inferred← citeshttps://doi.org/10.3390/jmmp10100407openalex-snapshot

On Porosity Analysis of Ti-6Al-4V Thin Struts Made by Laser Powder-Bed Fusion: Effects of Build Orientation, Strut Size and Linear Energy Density

inferred← citeshttps://doi.org/10.3390/jmmp9070226openalex-snapshot

Size Effects on Process-Induced Porosity in Ti6Al4V Thin Struts Additively Manufactured by Laser Powder-Bed Fusion

inferred← citeshttps://doi.org/10.3390/ma11112129openalex-snapshot

Dynamic Loading of Lattice Structure Made by Selective Laser Melting-Numerical Model with Substitution of Geometrical Imperfections

inferred← citeshttps://doi.org/10.3390/ma14092462openalex-snapshot

Computational Approaches of Quasi-Static Compression Loading of SS316L Lattice Structures Made by Selective Laser Melting

inferred← citeshttps://doi.org/10.3390/ma15093144openalex-snapshot

Deviations of the SLM Produced Lattice Structures and Their Influence on Mechanical Properties

inferred← citeshttps://doi.org/10.3390/ma17194879openalex-snapshot

Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior

inferred← citeshttps://doi.org/10.3390/mi15020278openalex-snapshot

Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43

inferred← citeshttps://doi.org/10.35378/gujs.829340openalex-snapshot

Computer-Aided Prediction for Printable Density Limits of Additively-Manufactured Direction-Wise Stretch-Dominated Strut-Based Lattice Structures

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.