On the public citation graph
Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales
0 signed · 98 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/adem.200310095openalex-snapshot
Titanium Alloys for Aerospace Applications
inferredcites →https://doi.org/10.1002/srin.201800425openalex-snapshot
Influence of the Crystallographic Orientation on the Yield Strength and Deformation Mechanisms of Austenitic Grains in Metastable Stainless Steels Investigated by Spherical Nanoindentation
inferredcites →https://doi.org/10.1007/978-3-662-40293-1openalex-snapshot
Elemente der Technologischen Mechanik
inferredcites →https://doi.org/10.1007/s11012-019-01051-xopenalex-snapshot
Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy
inferredcites →https://doi.org/10.1007/s11249-016-0805-5openalex-snapshot
Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview
inferredcites →https://doi.org/10.1007/s11661-002-0299-7openalex-snapshot
Young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr in relation to α″ martensite
inferredcites →https://doi.org/10.1007/s11665-015-1383-7openalex-snapshot
Micromechanics-Based Damage Analysis of Fracture in Ti5553 Alloy with Application to Bolted Sectors
inferredcites →https://doi.org/10.1007/s11665-019-04404-5openalex-snapshot
Effect of Solution Treatment on the Microstructure, Micromechanical Properties, and Kinetic Parameters of the β → α Phase Transformation during Continuous Cooling of Ti-6Al-4V Titanium Alloy
inferredcites →https://doi.org/10.1007/s12289-020-01543-2openalex-snapshot
Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range
inferredcites →https://doi.org/10.1007/s12666-014-0438-zopenalex-snapshot
Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4VAlloy
inferredcites →https://doi.org/10.1016/0020-7683(87)90116-8openalex-snapshot
Elastic analysis of some punch problems for a layered medium
inferredcites →https://doi.org/10.1016/0022-5096(52)90002-1openalex-snapshot
Plastic instability under plane stress
inferredcites →https://doi.org/10.1016/0921-5093(89)90290-6openalex-snapshot
Theory of plastic deformation: - properties of low energy dislocation structures
inferredcites →https://doi.org/10.1016/j.actamat.2005.03.051openalex-snapshot
The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments
inferredcites →https://doi.org/10.1016/j.actamat.2005.07.030openalex-snapshot
Direct observations and analyses of dislocation substructures in the α phase of an α/β Ti-alloy formed by nanoindentation
inferredcites →https://doi.org/10.1016/j.ijplas.2009.08.007openalex-snapshot
Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling
inferredcites →https://doi.org/10.1016/j.ijplas.2010.03.002openalex-snapshot
A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates
inferredcites →https://doi.org/10.1016/j.ijplas.2014.10.003openalex-snapshot
Anisotropy and tension–compression asymmetry modeling of the room temperature plastic response of Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.ijsolstr.2011.01.011openalex-snapshot
Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6V at room temperature
inferredcites →https://doi.org/10.1016/j.jallcom.2016.02.146openalex-snapshot
A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys
inferredcites →https://doi.org/10.1016/j.jallcom.2016.10.080openalex-snapshot
Discontinuous yielding and microstructural evolution of Ti-40 at.% Al alloy compressed in single α-hcp phase region
inferredcites →https://doi.org/10.1016/j.jallcom.2020.157336openalex-snapshot
Visco-plastic self-consistent modeling of crystallographic texture evolution related to slip systems activated during machining Ti-6AL-4V
inferredcites →https://doi.org/10.1016/j.jmrt.2019.06.009openalex-snapshot
Nanoindentation characterization on local plastic response of Ti-6Al-4V under high-load spherical indentation
inferredcites →https://doi.org/10.1016/j.matchar.2011.01.011openalex-snapshot
Investigation of mechanical behavior of quenched Ti–6Al–4V alloy by microindentation
inferredcites →https://doi.org/10.1016/j.matpr.2019.08.139openalex-snapshot
Numerical analysis on the indentation behavior of Ti-6Al-4V alloy
inferredcites →https://doi.org/10.1016/j.msea.2005.03.082openalex-snapshot
A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing
inferredcites →https://doi.org/10.1016/j.msea.2007.03.054openalex-snapshot
Metallurgical analysis and nanoindentation characterization of Ti–6Al–4V workpiece and chips in high-throughput drilling
inferredcites →https://doi.org/10.1016/j.msea.2007.12.029openalex-snapshot
Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques—A comparative study
inferredcites →https://doi.org/10.1016/j.msea.2010.10.008openalex-snapshot
High strain-rate plastic flow behavior of Ti–6Al–4V from dynamic indentation experiments
inferredcites →https://doi.org/10.1016/j.msea.2013.05.032openalex-snapshot
Micromechanical behavior study of α phase with different morphologies of Ti–6Al–4V alloy by microindentation
inferredcites →https://doi.org/10.1016/j.msea.2014.03.009openalex-snapshot
Impact of anisotropy and viscosity to model the mechanical behavior of Ti–6Al–4V alloy
inferredcites →https://doi.org/10.1016/j.msea.2014.10.024openalex-snapshot
Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths
inferredcites →https://doi.org/10.1016/j.msea.2014.11.090openalex-snapshot
Experiments and crystal plasticity finite element simulations of nanoindentation on Ti–6Al–4V alloy
inferredcites →https://doi.org/10.1016/j.msea.2015.07.096openalex-snapshot
Dependence of nanoindentation hardness with crystallographic orientation of austenite grains in metastable stainless steels
inferredcites →https://doi.org/10.1016/j.msea.2015.09.016openalex-snapshot
Local deformation mechanisms of two-phase Ti alloy
inferredcites →https://doi.org/10.1016/j.msea.2018.01.013openalex-snapshot
Anisotropy of < a > slip behaviour in single-colony lamellar structures of Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.mtla.2018.100189openalex-snapshot
Slip-stimulated grain boundary sliding in Ti-6Al-4 V at room temperature
inferredcites →https://doi.org/10.1016/j.piutam.2012.05.022openalex-snapshot
Compression Test for Metal Characterization using Digital Image Correlation and Inverse Modeling
inferredcites →https://doi.org/10.1016/s0079-6425(02)00003-8openalex-snapshot
Physics and phenomenology of strain hardening: the FCC case
inferredcites →https://doi.org/10.1016/s0142-9612(99)00114-3openalex-snapshot
Structure and properties of cast binary Ti–Mo alloys
inferredcites →https://doi.org/10.1016/s1359-6454(03)00239-8openalex-snapshot
Strain hardening of titanium: role of deformation twinning
inferredcites →https://doi.org/10.1016/s1359-6454(98)00196-7openalex-snapshot
A dislocation-based model for all hardening stages in large strain deformation
inferredcites →https://doi.org/10.1016/s1359-6454(99)00020-8openalex-snapshot
Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density
inferredcites →https://doi.org/10.1080/14786436608212647openalex-snapshot
A statistical theory of flow stress and work-hardening
inferredcites →https://doi.org/10.1177/0954406218762947openalex-snapshot
Identification of the anisotropic behavior of an aluminum alloy subjected to simple and cyclic shear tests
inferredcites →https://doi.org/10.1179/1743284715y.0000000118openalex-snapshot
Critical Assessment 16: Anisotropy in metals
inferredcites →https://doi.org/10.1179/imr.1967.12.1.169openalex-snapshot
The crystallography and deformation modes of hexagonal close-packed metals
inferredcites →https://doi.org/10.1520/jte104226openalex-snapshot
Computation of Tensile Strain-Hardening Exponents through the Power-Law Relationship
inferredcites →https://doi.org/10.1557/jmr.1992.1564openalex-snapshot
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
inferredcites →https://doi.org/10.1557/jmr.1999.0306openalex-snapshot
A critical examination of the fundamental relations used in the analysis of nanoindentation data
inferredcites →https://doi.org/10.1557/jmr.2004.19.1.3openalex-snapshot
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
inferredcites →https://doi.org/10.15632/jtam-pl.54.4.1147openalex-snapshot
Identification strategy of anisotropic behavior laws: application to thin sheets of Aluminium A5
inferredcites →https://doi.org/10.3390/cryst9060289openalex-snapshot
Geometrically Necessary Dislocations on Plastic Deformation of Polycrystalline TRIP Steel
inferredcites →https://doi.org/10.3390/met10060713openalex-snapshot
Extension of Barlat’s Yield Criterion to Tension–Compression Asymmetry: Modeling and Verification
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.1002/adem.202001341openalex-snapshot
Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V
inferred← citeshttps://doi.org/10.1007/s00466-023-02362-3openalex-snapshot
Accurate numerical prediction of ductile fracture and micromechanical damage evolution for Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.corsci.2026.114133openalex-snapshot
Processing-controlled corrosion and passive film chemistry of TiNbCr multi-principal element alloy in simulated body fluid
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2022.106921openalex-snapshot
High-throughput characterization of the cyclic response of Ti-6Al-4V using spherical microindentation stress–strain protocols
inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.172455openalex-snapshot
A novel approach to enhance mechanical properties of Ti substrates for biomedical applications
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.181463openalex-snapshot
Effect of minor additions of Al, Nb and V on the microstructure and mechanical properties of HfTiZr medium entropy alloy
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.08.255openalex-snapshot
Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy
inferred← citeshttps://doi.org/10.1016/j.jmrt.2026.09.207openalex-snapshot
Revealing nano and atomic mechanical deformation and damage behaviors of Ti-6Al-4V alloys printed by laser powder bed fusion using in-situ SEM nanoindentation and TEM techniques
inferred← citeshttps://doi.org/10.1016/j.matchemphys.2024.129966openalex-snapshot
Influence of martensite and grain size on the mechanical behavior of austenitic Fe–C–Mn–Ni–Al medium Mn steels with TWIP mechanism under uniaxial tension/compression and micromechanical creep
inferred← citeshttps://doi.org/10.1016/j.matdes.2023.111678openalex-snapshot
Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP
inferred← citeshttps://doi.org/10.1016/j.matlet.2023.134105openalex-snapshot
Superior fretting wear resistance of 30Nb5Ta30Ti15V20Zr refractory high entropy alloy in a comparison with Ti6Al4V
inferred← citeshttps://doi.org/10.1016/j.mattod.2023.07.018openalex-snapshot
Low-density, high-strength metal mechanical metamaterials beyond the Gibson-Ashby model
inferred← citeshttps://doi.org/10.1016/j.msea.2024.146493openalex-snapshot
Uniaxial deformation behaviors and mechanism of Ti–6Al–4V alloy with bi-oriented grains
inferred← citeshttps://doi.org/10.1016/j.msea.2025.148339openalex-snapshot
Enhanced strength and strain hardening in a dilute Ti-Ru alloy for load-bearing applications
inferred← citeshttps://doi.org/10.1016/j.mseb.2025.118409openalex-snapshot
Effect of sandblasting treatment on the microstructure and mechanical properties of Ti-6Al-4V porous radial gradient scaffolds formed by SLM
inferred← citeshttps://doi.org/10.1016/j.mser.2024.100853openalex-snapshot
Multicomponent alloys design and mechanical response: From high entropy alloys to complex concentrated alloys
inferred← citeshttps://doi.org/10.1016/j.prostr.2024.01.005openalex-snapshot
Tensile and nanoindentation tests analysis of Ti6Al4V alloy manufactured by laser powder bed fusion
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2024.130524openalex-snapshot
Plasma electrolytic oxidation coatings on mechanically cold-worked titanium in solution containing hydroxyapatite ions
inferred← citeshttps://doi.org/10.1021/acsami.3c16742openalex-snapshot
Evaluation of In Vivo Biocompatibility in Preclinical Studies of a Finger Implant Medical Device Correlated with Mechanical Properties and Microstructure
inferred← citeshttps://doi.org/10.1038/s41598-026-35044-0openalex-snapshot
Fracture behavior of Ti-6Al-4V in the extreme thermo-mechanical environment of fan blade-out
inferred← citeshttps://doi.org/10.1051/matecconf/202439201028openalex-snapshot
Effect of ECAP process on deformability, microstructure and conductivity of AA5083 under thermal effect
inferred← citeshttps://doi.org/10.1061/(asce)mt.1943-5533.0004218openalex-snapshot
Relationship between Nano and Macroscale Properties of Postfire ASTM A36 Steels
inferred← citeshttps://doi.org/10.1177/14644207211009933openalex-snapshot
Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti–6Al–4V specimens exhibiting positive stress triaxialities
inferred← citeshttps://doi.org/10.1177/14644207221136126openalex-snapshot
Dynamic numerical prediction of plasticity and damage in a turbofan blade containment test
inferred← citeshttps://doi.org/10.15407/mfint.44.11.1433openalex-snapshot
Hardness of Ti–6Al–4V (ВТ6) Alloy Samples Fabricated by 3D-Printing Based on Electron-Beam Melting of Wire
inferred← citeshttps://doi.org/10.15407/mfint.44.11.1453openalex-snapshot
Surface Hardening of Ti6Al4V Alloy Using High-Frequency Mechanical Impacts
inferred← citeshttps://doi.org/10.1557/s43578-025-01740-2openalex-snapshot
A concise review of Ti64 nanoindentation and CPFEM modelling approaches
inferred← citeshttps://doi.org/10.2351/7.0001633openalex-snapshot
Laser additive manufacturing of TI-6AL-4V alloy at a high deposition-rate using a rectangular laser spot
inferred← citeshttps://doi.org/10.3390/aerospace11040285openalex-snapshot
A Combined Experimental and Numerical Calibration Approach for Modeling the Performance of Aerospace-Grade Titanium Alloy Products
inferred← citeshttps://doi.org/10.3390/aerospace11050333openalex-snapshot
Computational Mechanics for Turbofan Engine Blade Containment Testing: Fan Case Design and Blade Impact Dynamics by Finite Element Simulations
inferred← citeshttps://doi.org/10.3390/coatings13111969openalex-snapshot
Simulation and Experimental Investigation of Multi-Step Shot Peening for Surface Crack Repair in Aluminum Alloys
inferred← citeshttps://doi.org/10.3390/cryst12111537openalex-snapshot
Comparative Study of TiMn and TiAlV Alloys via the Nanoindentation Technique
inferred← citeshttps://doi.org/10.3390/jfb14020094openalex-snapshot
Surface Modified β-Ti-18Mo-6Nb-5Ta (wt%) Alloy for Bone Implant Applications: Composite Characterization and Cytocompatibility Assessment
inferred← citeshttps://doi.org/10.3390/ma15144729openalex-snapshot
On the Morphological Deviation in Additive Manufacturing of Porous Ti6Al4V Scaffold: A Design Consideration
inferred← citeshttps://doi.org/10.3390/ma16124341openalex-snapshot
Nano-Mechanical Behavior of Ti6Al4V Alloy Manufactured Using Laser Powder Bed Fusion
inferred← citeshttps://doi.org/10.3390/ma17081796openalex-snapshot
The Development of a Continuous Constitutive Model for Thin-Shell Components with A Sharp Change in the Property at Welded Joints
inferred← citeshttps://doi.org/10.3390/ma17225516openalex-snapshot
High-Performance Concrete from Rubber and Shell Waste Materials: Experimental and Computational Analysis
inferred← citeshttps://doi.org/10.3390/met14010074openalex-snapshot
Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response
inferred← citeshttps://doi.org/10.3390/polym14204325openalex-snapshot
Evaluation of the Orthotropic Behavior in an Auxetic Structure Based on a Novel Design Parameter of a Square Cell with Re-Entrant Struts
inferred← citeshttps://doi.org/10.3390/technologies14060315openalex-snapshot
In-Layer Laser Remelting Effects on Dry Sliding Tribology of Additive Manufactured Ti-6Al-4V ELI Using GLM–RSM Statistical Method
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.