On the public citation graph

A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool

https://doi.org/10.1016/j.jmatprotec.2008.10.013
0 signed · 153 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s00170-005-0364-7openalex-snapshot
A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers
inferredcites →https://doi.org/10.1007/s11661-002-0284-1openalex-snapshot
On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V)
inferredcites →https://doi.org/10.1016/0921-5093(94)09595-nopenalex-snapshot
Some metallurgical aspects of chip formation in cutting Ti-6wt.%Al-4wt.%V alloy
inferredcites →https://doi.org/10.1016/j.ijmachtools.2004.12.003openalex-snapshot
The effects of chamfered and honed tool edge geometry in machining of three aluminum alloys
inferredcites →https://doi.org/10.1016/j.ijmachtools.2005.02.004openalex-snapshot
Modelling the correlation between cutting and process parameters in high-speed machining of Inconel 718 alloy using an artificial neural network
inferredcites →https://doi.org/10.1016/j.jmatprotec.2004.02.001openalex-snapshot
Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718™ at high cutting speeds
inferredcites →https://doi.org/10.1016/j.matdes.2005.12.008openalex-snapshot
The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 super alloys
inferredcites →https://doi.org/10.1016/j.wear.2006.01.013openalex-snapshot
An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V
inferredcites →https://doi.org/10.1016/s0007-8506(07)62067-8openalex-snapshot
Material aspects of chip formation in HSC machining
inferredcites →https://doi.org/10.1016/s0007-8506(07)62402-0openalex-snapshot
High-speed Machining of Inconel 718 with Ceramic Tools
inferredcites →https://doi.org/10.1016/s0022-5096(02)00060-1openalex-snapshot
Slip-line modeling of machining with a rounded-edge tool—Part I: new model and theory
inferredcites →https://doi.org/10.1016/s0736-5845(00)00042-9openalex-snapshot
Machining of aerospace titanium alloys
inferredcites →https://doi.org/10.1016/s0749-6419(01)00003-1openalex-snapshot
Adiabatic shear banding in high speed machining of Ti–6Al–4V: experiments and modeling
inferredcites →https://doi.org/10.1016/s0890-6955(00)00096-1openalex-snapshot
Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy
inferredcites →https://doi.org/10.1016/s0890-6955(03)00159-7openalex-snapshot
A review of developments towards dry and high speed machining of Inconel 718 alloy
inferredcites →https://doi.org/10.1016/s0924-0136(02)01042-7openalex-snapshot
An overview of the machinability of aeroengine alloys
inferredcites →https://doi.org/10.1080/10940340008945703openalex-snapshot
MACHINABILITY OF NICKEL-BASED HIGH TEMPERATURE ALLOYS
inferredcites →https://doi.org/10.1080/10940349808945672openalex-snapshot
RECENT PROGRESS AND SOME DIFFICULTIES IN COMPUTATIONAL MODELING OF MACHINING
inferredcites →https://doi.org/10.1115/1.1459469openalex-snapshot
Finite Element Simulation of Segmented Chip Formation of Ti6Al4V
inferredcites →https://doi.org/10.1115/1.3664242openalex-snapshot
New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting
inferredcites →https://doi.org/10.1243/jmes_jour_1972_014_015_02openalex-snapshot
Slip-Line Field Analysis for Orthogonal Machining Based upon Experimental Flow Fields
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.471-472.339openalex-snapshot
Experimental Investigation on the High-Speed Machining of Hardened Steel

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4603534openalex-extracted
Temperature Analysis in 3d Finish Turning Operation Applied to Superalloy Inconel 718
inferred← citeshttps://doi.org/10.1002/9781118792148.ch57openalex-snapshot
Study on the Strain Rate Sensitivity of a Ni‐Based Superalloy
inferred← citeshttps://doi.org/10.1002/9781118792148.ch66openalex-snapshot
Study on Precipitation Behavior of δ Phase in IN718 Alloy by Electric Field Treatment
inferred← citeshttps://doi.org/10.1002/9781119139508.ch42openalex-snapshot
Force Modelling for Temperature Field Determination During High Speed End‐ Milling of Super Alloys
inferred← citeshttps://doi.org/10.1007/978-1-4614-4226-4_23openalex-snapshot
Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)
inferred← citeshttps://doi.org/10.1007/978-3-319-09918-7_82openalex-snapshot
Analysis of Indirect Measurement of Cutting Forces Turning Metal Cylindrical Shells
inferred← citeshttps://doi.org/10.1007/978-3-319-48170-8_42openalex-snapshot
Force Modelling for Temperature Field Determination during High Speed End-Milling of Super Alloys
inferred← citeshttps://doi.org/10.1007/978-3-319-48764-9_57openalex-snapshot
Study on the Strain Rate Sensitivity of a Ni-Based Superalloy
inferred← citeshttps://doi.org/10.1007/978-3-319-48764-9_66openalex-snapshot
Study on Precipitation Behavior of δ Phase in IN718 Alloy by Electric Field Treatment
inferred← citeshttps://doi.org/10.1007/978-3-319-78488-5_10openalex-snapshot
Comparative Assessment and Merit Appraisal of Thermally Assisted Machining Techniques for Improving Machinability of Titanium Alloys
inferred← citeshttps://doi.org/10.1007/978-3-662-43902-9_3openalex-snapshot
Mechanics of Titanium Machining
inferred← citeshttps://doi.org/10.1007/s00170-010-2703-6openalex-snapshot
Effect of tool edge wear on the cutting forces and vibrations in high-speed finish machining of Inconel 718: an experimental study and wavelet transform analysis
inferred← citeshttps://doi.org/10.1007/s00170-010-2887-9openalex-snapshot
A comparative study of sharp and round-edge tools in machining with built-up edge formation: cutting forces, cutting vibrations, and neural network modeling
inferred← citeshttps://doi.org/10.1007/s00170-012-4503-7openalex-snapshot
Machining optimization using swarm intelligence in titanium (6Al 4V) alloy
inferred← citeshttps://doi.org/10.1007/s00170-013-4869-1openalex-snapshot
Multidisciplinary design optimization of a milling cutter for high-speed milling of stainless steel
inferred← citeshttps://doi.org/10.1007/s00170-013-4931-zopenalex-snapshot
A comparative study of high-speed machining of Ti-6Al-4V and Inconel 718—part II: Effect of dynamic tool edge wear on cutting vibrations
inferred← citeshttps://doi.org/10.1007/s00170-013-4981-2openalex-snapshot
A comparative study of high-speed machining of Ti–6Al–4V and Inconel 718 - part I: effect of dynamic tool edge wear on cutting forces
inferred← citeshttps://doi.org/10.1007/s00170-015-6801-3openalex-snapshot
A predictive hybrid force modeling in turning: application to stainless steel dry machining with a coated groove tool
inferred← citeshttps://doi.org/10.1007/s00170-015-8057-3openalex-snapshot
Optimization of process parameters for high speed machining of Ti-6Al-4V using response surface methodology
inferred← citeshttps://doi.org/10.1007/s00170-017-1048-9openalex-snapshot
A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components
inferred← citeshttps://doi.org/10.1007/s00170-017-1573-6openalex-snapshot
Study on cutting burr and tool failure during high-speed milling of compacted graphite iron by the coated carbide tool
inferred← citeshttps://doi.org/10.1007/s00170-018-1759-6openalex-snapshot
A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions
inferred← citeshttps://doi.org/10.1007/s00170-018-2096-5openalex-snapshot
Effects of cooling strategies and tool coatings on cutting forces and tooth frequency in high-speed down-milling of Inconel-718 using helical bull-nose solid carbide end mills
inferred← citeshttps://doi.org/10.1007/s00170-018-2586-5openalex-snapshot
Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals
inferred← citeshttps://doi.org/10.1007/s00170-020-06086-zopenalex-snapshot
Investigation on PCD cutting edge geometry for Ti6Al4V high-feed milling
inferred← citeshttps://doi.org/10.1007/s00170-022-09958-8openalex-snapshot
Study on formation mechanism of serrated chip of Ti-6Al-4V titanium alloy based on shear slip theory
inferred← citeshttps://doi.org/10.1007/s00170-023-11092-yopenalex-snapshot
FE simulation, analytical prediction, and experimentation of cutting force in longitudinal vibration-assisted milling (LVAM) during Ti-6Al-4 V cutting
inferred← citeshttps://doi.org/10.1007/s00170-025-16130-5openalex-snapshot
Experimental and simulation-based investigation of serrated chip formation in high-speed milling of Inconel 718
inferred← citeshttps://doi.org/10.1007/s11340-013-9793-7openalex-snapshot
Dynamic Behavior and High Speed Machining of Ti-6246 and Alloy 625 Superalloys: Experimental and Modeling Approaches
inferred← citeshttps://doi.org/10.1007/s11595-024-2953-zopenalex-snapshot
Influence of Mass Ratio of Resin and Stabilizer on Mechanical Properties of Mo Fiber-reinforced Granite Polymer Composite
inferred← citeshttps://doi.org/10.1007/s11740-020-00971-yopenalex-snapshot
Experimental investigation of specific cutting forces and estimation of the heat partitioning under increasing tool wear in machining nickel-based super alloy IN 718
inferred← citeshttps://doi.org/10.1007/s12046-017-0598-8openalex-snapshot
Taguchi optimization of machining parameters in drilling of AISI D2 steel using cryo-treated carbide drills
inferred← citeshttps://doi.org/10.1007/s12541-013-0122-yopenalex-snapshot
Power consumption and tool wear assessment when machining titanium alloys
inferred← citeshttps://doi.org/10.1007/s13369-013-0776-xopenalex-snapshot
High Speed Turning of Inconel 718 Using Ceramic and Carbide Cutting Tools
inferred← citeshttps://doi.org/10.1007/s40430-020-2180-2openalex-snapshot
Analysis of high aspect ratio small holes in rapid electrical discharge machining of superalloys using Taguchi and TOPSIS
inferred← citeshttps://doi.org/10.1007/s40436-021-00362-1openalex-snapshot
Performance evaluation of nanofluid-based minimum quantity lubrication grinding of Ni-Cr alloy under the influence of CuO nanoparticles
inferred← citeshttps://doi.org/10.1007/s43452-024-00951-4openalex-snapshot
Feasibility study of high feed axial ultrasonic vibration turning of Ti6Al4V
inferred← citeshttps://doi.org/10.1016/b978-0-08-096532-1.01330-3openalex-snapshot
Review of Sensor Applications in Tool Condition Monitoring in Machining
inferred← citeshttps://doi.org/10.1016/b978-0-12-815020-7.00005-9openalex-snapshot
Cooling and machining strategies for high speed milling of titanium and nickel super alloys
inferred← citeshttps://doi.org/10.1016/j.apsusc.2024.161152openalex-snapshot
An investigation of phase boundary effect on the cutting force fluctuation in orthogonal micro-cutting of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.ceramint.2016.06.124openalex-snapshot
Wear behavior of PVD TiN coated carbide inserts during machining of Nimonic 90 and Ti6Al4V superalloys under dry and MQL conditions
inferred← citeshttps://doi.org/10.1016/j.ceramint.2018.05.209openalex-snapshot
Cutting performance and wear mechanism of TiB2-B4C ceramic cutting tools in high speed turning of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.12.041openalex-snapshot
Wear behavior and mechanism of TiB2-based ceramic inserts in high-speed cutting of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.ceramint.2024.02.152openalex-snapshot
An assessment of machining performance of CAPVD-coated carbide tools in face milling of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.115224openalex-snapshot
Enhancing hygrothermal mechanical properties stability of polymer composite based on the concrete structure
inferred← citeshttps://doi.org/10.1016/j.conbuildmat.2019.06.144openalex-snapshot
Effective resin content and its effect on the overall performance of polymer concrete for precision machine tools
inferred← citeshttps://doi.org/10.1016/j.diamond.2022.109182openalex-snapshot
Crystal orientation and material type related suppression to the graphitization wear of micro diamond tool
inferred← citeshttps://doi.org/10.1016/j.heliyon.2021.e06790openalex-snapshot
Review of life cycle models for enhancing machine tools sustainability: lessons, trends and future directions
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2014.10.005openalex-snapshot
Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2020.103529openalex-snapshot
A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2013.06.011openalex-snapshot
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
inferred← citeshttps://doi.org/10.1016/j.jclepro.2016.09.216openalex-snapshot
Sustainability in machining: “Eco-friendly” turning of Inconel 718. Surface characterisation and economic analysis
inferred← citeshttps://doi.org/10.1016/j.jclepro.2017.06.095openalex-snapshot
Experimental study for the effective and sustainable repair and maintenance of bars made of Ti-6Al-4V alloy. Application to the aeronautic industry
inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.09.056openalex-snapshot
Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy
inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.02.033openalex-snapshot
Tool wear analysis of high-speed sawing of aerospace aluminum alloy based on FEM simulation and cutting experiments
inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.05.038openalex-snapshot
Prediction of the energy consumption and surface integrity in machining of Inconel 718 superalloy using an orthogonal cutting model considering the stress state
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2013.01.015openalex-snapshot
Modeling of velocity-dependent chip flow angle and experimental analysis when machining 304L austenitic stainless steel with groove coated-carbide tools
inferred← citeshttps://doi.org/10.1016/j.jmrt.2022.07.077openalex-snapshot
Improved cemented carbide tool edge formed by solid phase chemical–mechanical polishing
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.05.202openalex-snapshot
Effects of machining parameters, ultrasonic vibrations and cooling conditions on cutting forces and tool wear in meso scale ultrasonic vibrations assisted end-milling (UVAEM) of Ti–6Al–4V under dry, flooded, MQL and cryogenic environments – A statistical analysis
inferred← citeshttps://doi.org/10.1016/j.matchemphys.2026.132509openalex-snapshot
Insights into the low thermal-load cutting behavior of Ti–6Al–4V in high-efficiency endless diamond wire sawing
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.12.1208openalex-snapshot
WITHDRAWN: Experimental investigation and comparative assessment of PVD and CVD insert on dry machining of waspaloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2021.03.490openalex-snapshot
A review on conventional and thermal assisted machining of titanium based alloy
inferred← citeshttps://doi.org/10.1016/j.measurement.2016.04.039openalex-snapshot
Surface roughness prediction for the milling of Ti–6Al–4V ELI alloy with the use of statistical and soft computing techniques
inferred← citeshttps://doi.org/10.1016/j.msea.2019.138220openalex-snapshot
Quantitative characterization of machining-induced white layers in Ti–6Al–4V
inferred← citeshttps://doi.org/10.1016/j.msea.2022.143003openalex-snapshot
Evolution of texture and tensile properties of cold-rotary swaged Ti–6Al–4V alloy seamless tubing after annealing at different temperatures
inferred← citeshttps://doi.org/10.1016/j.proeng.2014.12.248openalex-snapshot
A study on High Speed End Milling of Titanium Alloy
inferred← citeshttps://doi.org/10.1016/j.simpat.2019.102035openalex-snapshot
Determination of optimum numerical parameters in a 3D model of finish turning operation applied to Inconel 718
inferred← citeshttps://doi.org/10.1016/j.triboint.2010.10.032openalex-snapshot
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
inferred← citeshttps://doi.org/10.1016/j.triboint.2023.109002openalex-snapshot
Evaluation of tribological interactions and machinability of Ti6Al4V alloy during finish turning under different cooling conditions
inferred← citeshttps://doi.org/10.1016/j.vacuum.2025.115032openalex-snapshot
Enhanced adhesive wear resistance of TiB2 coating sliding against titanium alloy grinding balls by low-concentration Si doping
inferred← citeshttps://doi.org/10.1016/j.wear.2017.02.025openalex-snapshot
Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718
inferred← citeshttps://doi.org/10.1051/e3sconf/202343001271openalex-snapshot
Effect of High Speed Machining on Surface Roughness Characteristics Ra, Rq, RZ
inferred← citeshttps://doi.org/10.1051/matecconf/201929701011openalex-snapshot
Study of the Efficiency of Ultrasonic Turning of Heat-Resistant Alloys with Tools from Mineral Ceramics
inferred← citeshttps://doi.org/10.1051/mfreview/2016010openalex-snapshot
Design for additive manufacturing of composite materials and potential alloys: a review
inferred← citeshttps://doi.org/10.1080/10426914.2014.880460openalex-snapshot
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
inferred← citeshttps://doi.org/10.1080/10426914.2020.1843671openalex-snapshot
Machinability of Inconel 718: A critical review on the impact of cutting temperatures
inferred← citeshttps://doi.org/10.1080/10910344.2011.580702openalex-snapshot
AN EXPERIMENTAL AND FEM STUDY ON DRY TURNING OF ROTOR STEEL 26NiCrMoV145 USING MULTILAYER COATED CEMENTED CARBIDE TOOL
inferred← citeshttps://doi.org/10.1080/10910344.2025.2598301openalex-snapshot
A review of tool wear and its effect on surface integrity of Inconel 718
inferred← citeshttps://doi.org/10.1088/1742-6596/1601/4/042022openalex-snapshot
The Cutting Force Simulation of 30CrMnSiA Based on AdvantEdge 2D Broaching
inferred← citeshttps://doi.org/10.1108/aeat-11-2015-0242openalex-snapshot
Five-axis milling of sculptured surfaces of the turbine blade
inferred← citeshttps://doi.org/10.1109/icasi.2017.7988346openalex-snapshot
Analysis on the correlation between cutting signals and surface quality in milling process of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1109/ifeea54171.2021.00095openalex-snapshot
Research on optimization of CNC milling parameters based on multi-island genetic algorithm
inferred← citeshttps://doi.org/10.1142/s0219686713500078openalex-snapshot
PERFORMANCE OF A COATED CEMENTED CARBIDE TOOL IN HIGH SPEED MILLING OF TI-6AL-4V ALLOY
inferred← citeshttps://doi.org/10.1177/0954405415572662openalex-snapshot
Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method
inferred← citeshttps://doi.org/10.1177/0954405417728310openalex-snapshot
Investigating tool performance and wear when simulating bandsawing of nickel-based superalloy under interrupted orthogonal turning condition
inferred← citeshttps://doi.org/10.1177/0954406212466792openalex-snapshot
Application of grey relational analysis in high-speed machining of hardened AISI D6 steel
inferred← citeshttps://doi.org/10.1177/09544089231192342openalex-snapshot
Effectiveness of coolant on sustainable drilling and hole quality of titanium alloy
inferred← citeshttps://doi.org/10.1177/1350650120933420openalex-snapshot
Investigation of the role of tribolayer formation in improving drilling performance of Ti-6Al-4V using minimum quantity of lubrication
inferred← citeshttps://doi.org/10.12700/aph.10.08.2013.8.11openalex-snapshot
High Speed Hard Turning of AISI S1 (60WCrV8) Cold Work Tool Steel
inferred← citeshttps://doi.org/10.1504/ijmpt.2015.070098openalex-snapshot
Analysis and optimisation of machining parameters in micro turning using RSM
inferred← citeshttps://doi.org/10.1515/eng-2017-0024openalex-snapshot
Wear-dependent specific coefficients in a mechanistic model for turning of nickel-based superalloy with ceramic tools
inferred← citeshttps://doi.org/10.1515/mt-2023-0210openalex-snapshot
Effects of build orientation and hatch spacing on high-speed milling behavior of L-PBF 316L stainless steel
inferred← citeshttps://doi.org/10.15282/jmes.11.1.2017.12.0233openalex-snapshot
Cutting force and chip formation in end milling operation when machining nickelbased superalloy, Hastelloy C-2000
inferred← citeshttps://doi.org/10.1533/9780857092199.29openalex-snapshot
High-performance machining of austenitic stainless steels
inferred← citeshttps://doi.org/10.1631/jzus.a1000408openalex-snapshot
Cutting force and its frequency spectrum characteristics in high speed milling of titanium alloy with a polycrystalline diamond tool
inferred← citeshttps://doi.org/10.17222/mit.2021.236openalex-snapshot
EFFECT OF THE MQL TECHNIQUE ON CUTTING FORCE AND SURFACE QUALITY DURING THE SLOT MILLING OF TITANIUM ALLOY
inferred← citeshttps://doi.org/10.17559/tv-20220509122549openalex-snapshot
Influence of Variation of Cutting Speed on Wear, Cutting Forces and Tool Temperature during Performance Drilling
inferred← citeshttps://doi.org/10.17814/mechanik.2016.10.357openalex-snapshot
Geometry area of cut in machining sculptured surfaces of the toroidal cutter
inferred← citeshttps://doi.org/10.18002/10612/2100openalex-snapshot
Metodología para el análisis del comportamiento y caracterización de los aceros inoxidables austeníticos en el torneado de alto rendimiento
inferred← citeshttps://doi.org/10.21062/ujep/x.2013/a/1213-2489/mt/13/4/437openalex-snapshot
Manufacturing of Femoral Heads from Ti-6Al-4V Alloy with High Speed Machining: 3D Finite Element Modelling and Experimental Validation
inferred← citeshttps://doi.org/10.2320/matertrans.mt-m2021138openalex-snapshot
Wear Properties of Self-Fluxing Ni60A–AlMgB14 Composite Coating Fabricated by Plasma Spraying
inferred← citeshttps://doi.org/10.24247/ijmperdjun202074openalex-snapshot
Research of Cutting Temperature Reducing of Titanium Alloy Grade 5 Below Polymorphic Transformation Depending on Calculation of Cutting Modes
inferred← citeshttps://doi.org/10.24874/ti.2018.40.03.12openalex-snapshot
Surface Roughness Analysis in High Speed Turning of Ti-6Al-4V Using Coated Carbide Inserts: Experimental and Modeling Studies
inferred← citeshttps://doi.org/10.2495/mc090151openalex-snapshot
Short-time test for evaluating the machinability of alloys
inferred← citeshttps://doi.org/10.2991/icadme-17.2017.39openalex-snapshot
Design of Titanium Alloy Disc Based on Deformation Theory
inferred← citeshttps://doi.org/10.2991/icmse-17.2017.59openalex-snapshot
Research of Titanium Diaphragm Disc Clamping Way
inferred← citeshttps://doi.org/10.30678/fjt.85312openalex-snapshot
Tribological behavior of the boric acid and titanium dioxide based nanofluid in machining of EN24 steel
inferred← citeshttps://doi.org/10.3233/atde220582openalex-snapshot
Effects of Machining Parameters on Feed Direction Cutting Forces in Meso-Scale End-Milling of Ti-6Al-4V Under Dry, Wet and MQL Environment
inferred← citeshttps://doi.org/10.3390/jmmp9120402openalex-snapshot
Technological Assurance of Surface Roughness of Ti-6Al-4V Parts Made Using Additive and Conventional Manufacturing Methods
inferred← citeshttps://doi.org/10.3390/ma12223749openalex-snapshot
Towards Optimization of Surface Roughness and Productivity Aspects during High-Speed Machining of Ti–6Al–4V
inferred← citeshttps://doi.org/10.35940/ijitee.l1017.10812s19openalex-snapshot
Elimination of Tool Failure in Edge Cutting Machine using Quality Tools and Techniques
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.34-35.666openalex-snapshot
Investigation of Machinability in Minimum Quantity Lubrication Milling of GH4169 Aerospace Superalloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.433-435.2025openalex-snapshot
A Study on the Cutting Characteristics and Detection of the Abnormal Tool State in Turning of Ti-6Al-4V ELI
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.493.546openalex-snapshot
Effect of High Speed Dry End Milling on Surface Roughness and Cutting Forces of Ti-6Al-4V ELI
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.66-68.1509openalex-snapshot
Finite Element Modeling for High Speed Machining of Ti-6Al-4V Using ALE Boundary Technology
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.557-559.191openalex-snapshot
Effect of Rolling Process on Microstructure and Texture of Cold Rolled Ti-6Al-4V Seamless Tubes
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.651.436openalex-snapshot
A Study of the Sensitivity of Parameters Affecting Coated Tool Life in High Speed Milling Superalloy GH4169
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.431-432.539openalex-snapshot
Milling Force Modeling for Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.527.159openalex-snapshot
Dynamic Compression Behavior and Numerical Modeling of Ti-6246 Alloy at Different Temperatures
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.611-612.1282openalex-snapshot
Experimental Analysis of Milling Operations in Ti-6Al-4V and Co-28Cr-6Mo Alloys for Medical Devices
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.856.43openalex-snapshot
Numerical Simulation of Cutting Force in High Speed Machining of Inconel 718
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.856.50openalex-snapshot
Comparative Study on Cutting Force Simulation Using DEFORM 3D Software during High Speed Machining of Ti-6Al-4V
inferred← citeshttps://doi.org/10.4271/2018-28-0031openalex-snapshot
A Comparative Study on Machinability Characteristics in Dry Machining of Inconel X-750 Alloy Using Coated Carbide Inserts
inferred← citeshttps://doi.org/10.4271/2019-28-0068openalex-snapshot
Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment
inferred← citeshttps://doi.org/10.4271/2022-28-0526openalex-snapshot
Optimization of Machining Parameters in Turning of Hastelloy C-276 by Considering Machinability and Chip Morphology Characteristics
inferred← citeshttps://doi.org/10.47749/t/unicamp.2015.957717openalex-snapshot
Uma contribuição ao estudo de vibração no fresamento em alta velocidade de corte do aço D6
inferred← citeshttps://doi.org/10.51983/arme-2012.1.2.2298openalex-snapshot
Machining Study of TI-6AL-4V Using PVD Coated TiAlN Inserts
inferred← citeshttps://doi.org/10.5545/sv-jme.2011.063openalex-snapshot
Tool-Edge Wear and Wavelet Packet Transform Analysis in High-Speed Machining of Inconel 718
inferred← citeshttps://doi.org/10.5829/ije.2023.36.02b.01openalex-snapshot
Tool Life of Uncoated and Coated Inserts during Turning of Ti6Al4V-ELI under Dry and Minimum Quantity Lubrication Environments
inferred← citeshttps://doi.org/10.5897/sre12.411openalex-snapshot
The effect of aging on the machinability of AA7075 aluminium alloy
inferred← citeshttps://doi.org/10.7463/0214.0687971openalex-snapshot
Analysis of indirectly measured cutting forces in turning metallic cylinder shells
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.