On the public citation graph

New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting

https://doi.org/10.1115/1.3664242
0 signed · 290 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4657860openalex-extracted
Evolution of Local Mechanical Loads During Drilling of Ti6Al4V/CFRP Due to Wear
inferred← citeshttps://doi.org/10.1002/9781119262893.biblioopenalex-snapshot
Bibliography
inferred← citeshttps://doi.org/10.1007/3-211-38053-1_6openalex-snapshot
Numerical & Experimental Metal Cutting Analysis: An Appraisal
inferred← citeshttps://doi.org/10.1007/978-1-349-01857-4_31openalex-snapshot
Effect of Strain-Rate Sensitivity on Scale Phenomena in Chip Formation
inferred← citeshttps://doi.org/10.1007/978-1-349-06281-2_37openalex-snapshot
Cutting Action of Blunt Tools
inferred← citeshttps://doi.org/10.1007/978-1-4615-8524-4_68openalex-snapshot
The Effect of Gullet Geometry on the Performance of Hacksaw Teeth
inferred← citeshttps://doi.org/10.1007/978-1-84800-205-0_7openalex-snapshot
Machinability and Surface Integrity
inferred← citeshttps://doi.org/10.1007/978-3-031-24038-6_2openalex-snapshot
Fundamentals of 3D Finite Element Modeling in Conventional Machining
inferred← citeshttps://doi.org/10.1007/978-3-031-28839-5_25openalex-snapshot
The Influence of the Rake Angle on the Cutting of Low-Lead and Lead-Free Brass Alloys
inferred← citeshttps://doi.org/10.1007/978-3-031-34486-2_23openalex-snapshot
Three-Dimensional Modeling of Thermomechanical Tool Loads During Milling Using the Coupled Eulerian-Lagrangian Formulation
inferred← citeshttps://doi.org/10.1007/978-3-540-88303-6_38openalex-snapshot
Investigation of Process-Specific Size Effects by 3D-FE-Simulations
inferred← citeshttps://doi.org/10.1007/978-3-642-00568-8_26openalex-snapshot
Burr Minimization and Removal by Micro Milling Strategies or Micro Peening Processes
inferred← citeshttps://doi.org/10.1007/978-3-642-11979-8_7openalex-snapshot
Tool Life Behaviour
inferred← citeshttps://doi.org/10.1007/978-3-642-20617-7_16677openalex-snapshot
Cutting Edge Influence on Machining Titanium Alloy
inferred← citeshttps://doi.org/10.1007/978-3-642-35950-7_16677-5openalex-snapshot
Cutting Edge Influence on Machining Titanium Alloy
inferred← citeshttps://doi.org/10.1007/978-3-642-45176-8_11openalex-snapshot
Modeling of Micromachining
inferred← citeshttps://doi.org/10.1007/978-3-662-53120-4_16677openalex-snapshot
Cutting Edge Influence on Machining Titanium Alloy
inferred← citeshttps://doi.org/10.1007/978-94-017-0161-7_28openalex-snapshot
Energy Assessment and Cutting Tool Behavior in Machining
inferred← citeshttps://doi.org/10.1007/978-981-32-9487-5_24openalex-snapshot
Numerical Analysis of Cutting Modes in High-Speed Machining of Aluminum Alloys with PCD and CBN Tool Inserts
inferred← citeshttps://doi.org/10.1007/s00107-023-01961-4openalex-snapshot
Effect of variable engineered micro-geometry of the cutting edges of circular saws on the surface quality of SPF boards
inferred← citeshttps://doi.org/10.1007/s00170-003-1550-0openalex-snapshot
Force modelling in shallow cuts with large negative rake angle and large nose radius tools?application to hard turning
inferred← citeshttps://doi.org/10.1007/s00170-010-2574-xopenalex-snapshot
The effect of tool edge radius on the chip formation behavior of tool-based micromachining
inferred← citeshttps://doi.org/10.1007/s00170-011-3555-4openalex-snapshot
A new method for the characterisation of rounded cutting edges
inferred← citeshttps://doi.org/10.1007/s00170-012-3941-6openalex-snapshot
A slip-line approach to the machining with rounded-edge tool
inferred← citeshttps://doi.org/10.1007/s00170-012-4507-3openalex-snapshot
Influence of cutting edge radius on surface integrity and burr formation in milling titanium
inferred← citeshttps://doi.org/10.1007/s00170-013-5394-yopenalex-snapshot
Study of reasons of increased active force using coolant with uncut chip thickness
inferred← citeshttps://doi.org/10.1007/s00170-014-6217-5openalex-snapshot
Study of Ti-1023 milling with toroidal tool
inferred← citeshttps://doi.org/10.1007/s00170-014-6423-1openalex-snapshot
Effect of uncut chip thickness on the ploughing force in orthogonal cutting
inferred← citeshttps://doi.org/10.1007/s00170-015-7826-3openalex-snapshot
Cutting forces and their modelling in plunge milling of magnesium-rare earth alloys
inferred← citeshttps://doi.org/10.1007/s00170-016-8386-xopenalex-snapshot
Investigation on the ploughing force in microcutting considering the cutting edge radius
inferred← citeshttps://doi.org/10.1007/s00170-016-8422-xopenalex-snapshot
Generalised cutting force model including contact radius effect for turning operations on Ti6Al4V titanium alloy
inferred← citeshttps://doi.org/10.1007/s00170-016-9216-xopenalex-snapshot
Mathematical model of plowing forces to account for flank wear using FME modeling for orthogonal cutting scheme
inferred← citeshttps://doi.org/10.1007/s00170-016-9302-0openalex-snapshot
Optimised approach for characterisation of cutting edge micro-geometry in drilling carbon fibre reinforced plastics(CFRP)
inferred← citeshttps://doi.org/10.1007/s00170-016-9599-8openalex-snapshot
Milling stability prediction for flexible workpiece using dynamics of coupled machining system
inferred← citeshttps://doi.org/10.1007/s00170-016-9922-4openalex-snapshot
A study on the tool edge geometry effect on nano-cutting
inferred← citeshttps://doi.org/10.1007/s00170-017-0842-8openalex-snapshot
A comparative study of hole-making performance by coated and uncoated WC/Co cutters in helical milling of Ti/CFRP stacks
inferred← citeshttps://doi.org/10.1007/s00170-019-03558-9openalex-snapshot
Methods to reduce variation in cutting tool life tests
inferred← citeshttps://doi.org/10.1007/s00170-019-03787-yopenalex-snapshot
An equivalent geometry model for turning tool with nose and edge radii
inferred← citeshttps://doi.org/10.1007/s00170-019-04709-8openalex-snapshot
Development and validation of a new friction model for cutting processes
inferred← citeshttps://doi.org/10.1007/s00170-020-05143-xopenalex-snapshot
CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling
inferred← citeshttps://doi.org/10.1007/s00170-020-05355-1openalex-snapshot
Analysis on specific cutting energy in micro milling of bulk metallic glass
inferred← citeshttps://doi.org/10.1007/s00170-020-05547-9openalex-snapshot
A novel finite element investigation of cutting force in orthogonal cutting considering plough mechanism with rounded edge tool
inferred← citeshttps://doi.org/10.1007/s00170-020-06195-9openalex-snapshot
Flooded drilling of Inconel 718 using graphene incorporating cutting fluid
inferred← citeshttps://doi.org/10.1007/s00170-020-06286-7openalex-snapshot
Effects of cutting edge radius on cutting force, tool wear, and life in milling of SUS-316L steel
inferred← citeshttps://doi.org/10.1007/s00170-021-07558-6openalex-snapshot
Cutting edge microgeometries in metal cutting: a review
inferred← citeshttps://doi.org/10.1007/s00170-021-08103-1openalex-snapshot
Modeling of contact stress and tool-based frictional forces considering edge effect in cutting Ti-6Al-4 V
inferred← citeshttps://doi.org/10.1007/s00170-021-08114-yopenalex-snapshot
Analytical modeling and prediction of cutting forces in orthogonal turning: a review
inferred← citeshttps://doi.org/10.1007/s00170-022-09622-1openalex-snapshot
Experimental verification of mechanistic force models for endmilling: the impact of the size effect on cutting coefficients
inferred← citeshttps://doi.org/10.1007/s00170-022-10591-8openalex-snapshot
The relationship between adhesion morphology and cutting force in orthogonal cutting of 6061-T6 aluminum alloy
inferred← citeshttps://doi.org/10.1007/s00170-023-12318-9openalex-snapshot
Revealing cutting mode transition in diamond cutting of SiCp/Al based on specific cutting energy model
inferred← citeshttps://doi.org/10.1007/s00170-023-12440-8openalex-snapshot
The effect of high-pressure cutting fluid supply on the chip breakability of lead-free brass alloys
inferred← citeshttps://doi.org/10.1007/s00170-023-12926-5openalex-snapshot
Residual stresses and surface damage when micromachining 6061-T6 aluminum alloy
inferred← citeshttps://doi.org/10.1007/s00170-023-12938-1openalex-snapshot
Inconel 625 sustainable milling surface integrity and the dependence on alloy processing route
inferred← citeshttps://doi.org/10.1007/s00170-024-14597-2openalex-snapshot
Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45
inferred← citeshttps://doi.org/10.1007/s11465-023-0766-yopenalex-snapshot
Edge preparation methods for cutting tools: a review
inferred← citeshttps://doi.org/10.1007/s11665-025-12565-9openalex-snapshot
Research on the Dynamic Mechanical Behavior and Machining Mechanism of TC4 Titanium Alloy
inferred← citeshttps://doi.org/10.1007/s11740-009-0166-0openalex-snapshot
Quasi-static chip formation of intermetallic titanium aluminides
inferred← citeshttps://doi.org/10.1007/s11740-014-0566-7openalex-snapshot
A novel method for chip formation analyses in deep hole drilling with small diameters
inferred← citeshttps://doi.org/10.1007/s11740-017-0742-7openalex-snapshot
Influence of asymmetric cutting edge roundings on surface topography
inferred← citeshttps://doi.org/10.1007/s11740-022-01139-6openalex-snapshot
Hybrid manufacturing: influence of material properties during micro milling of different additively manufactured AISI 316L
inferred← citeshttps://doi.org/10.1007/s11740-024-01323-wopenalex-snapshot
In-situ characterization and modeling of machining-induced residual stresses in peripheral milling of Ti–6Al–4V with rounded cutting edges
inferred← citeshttps://doi.org/10.1007/s40032-017-0372-zopenalex-snapshot
Force Modelling in Orthogonal Cutting Considering Flank Wear Effect
inferred← citeshttps://doi.org/10.1007/s40684-019-00035-2openalex-snapshot
Sustainability in Ultra Precision and Micro Machining: A Review
inferred← citeshttps://doi.org/10.1007/s41871-018-0005-zopenalex-snapshot
Recent Advances in Micro/Nano-cutting: Effect of Tool Edge and Material Properties
inferred← citeshttps://doi.org/10.1016/0020-7357(70)90003-xopenalex-snapshot
Fine structure of machined surfaces
inferred← citeshttps://doi.org/10.1016/0020-7357(70)90008-9openalex-snapshot
The mechanics of oblique cutting, taking into account the forces on the clearance face
inferred← citeshttps://doi.org/10.1016/0020-7357(82)90005-1openalex-snapshot
An experimetnal study of oblique cutting with single-ended tools
inferred← citeshttps://doi.org/10.1016/0020-7403(88)90101-4openalex-snapshot
Application of a comprehensive dynamic cutting force model to orthogonal wave-generating processes
inferred← citeshttps://doi.org/10.1016/0043-1648(73)90198-1openalex-snapshot
Post-machining plastic recovery and the law of abrasive wear
inferred← citeshttps://doi.org/10.1016/0043-1648(75)90161-1openalex-snapshot
Friction in metal machining—Mechanical aspects
inferred← citeshttps://doi.org/10.1016/0043-1648(78)90137-0openalex-snapshot
Some aspects of a three-zone model of machining
inferred← citeshttps://doi.org/10.1016/0043-1648(79)90188-1openalex-snapshot
Abrasive wear mechanisms and the grit size effect
inferred← citeshttps://doi.org/10.1016/0043-1648(80)90057-5openalex-snapshot
The tribology of orthogonal finish machining — A review
inferred← citeshttps://doi.org/10.1016/0043-1648(80)90221-5openalex-snapshot
Tool edge roundness in finish machining at high cutting speeds
inferred← citeshttps://doi.org/10.1016/0043-1648(83)90061-3openalex-snapshot
A fundamental study of cutting employing orthogonal negative rake tools
inferred← citeshttps://doi.org/10.1016/0141-6359(79)90139-9openalex-snapshot
Micro-defects on machined carbon steel surfaces
inferred← citeshttps://doi.org/10.1016/0890-6955(88)90021-1openalex-snapshot
Stresses at the cutting tool wear land
inferred← citeshttps://doi.org/10.1016/0924-0136(91)90089-wopenalex-snapshot
Monitoring the wear of sintered high-speed-steel tools
inferred← citeshttps://doi.org/10.1016/0924-0136(92)90031-mopenalex-snapshot
Effect of chip-breaker geometries on cutting forces
inferred← citeshttps://doi.org/10.1016/0924-0136(92)90210-jopenalex-snapshot
Experimental determination of the dynamic shear stress in metal cutting
inferred← citeshttps://doi.org/10.1016/0924-0136(96)02490-9openalex-snapshot
Computer aided cutting process parameter selection for high speed milling
inferred← citeshttps://doi.org/10.1016/b978-0-08-096532-1.01110-9openalex-snapshot
Diamond Turning
inferred← citeshttps://doi.org/10.1016/b978-0-444-81901-7.50069-4openalex-snapshot
Detection of Regenerative Chatter Using Spectral Analysis
inferred← citeshttps://doi.org/10.1016/b978-0-7506-8531-3.00023-7openalex-snapshot
References
inferred← citeshttps://doi.org/10.1016/b978-0-85709-485-8.00001-2openalex-snapshot
Modeling of micro- and nano-scale cutting
inferred← citeshttps://doi.org/10.1016/b978-008045263-0/50065-9openalex-snapshot
Process parameter analysis on surface roughness and process forces in micro cutting
inferred← citeshttps://doi.org/10.1016/j.apsusc.2021.150132openalex-snapshot
Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper
inferred← citeshttps://doi.org/10.1016/j.cirp.2009.09.002openalex-snapshot
Size effects in manufacturing of metallic components
inferred← citeshttps://doi.org/10.1016/j.cirp.2010.03.056openalex-snapshot
Influence of cutting edge radius on cutting forces in machining titanium
inferred← citeshttps://doi.org/10.1016/j.cirp.2011.05.001openalex-snapshot
Velocity effects in metal forming and machining processes
inferred← citeshttps://doi.org/10.1016/j.cirp.2011.05.002openalex-snapshot
Surface integrity in material removal processes: Recent advances
inferred← citeshttps://doi.org/10.1016/j.cirp.2014.05.009openalex-snapshot
Cutting edge geometries
inferred← citeshttps://doi.org/10.1016/j.cirp.2016.04.110openalex-snapshot
Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces
inferred← citeshttps://doi.org/10.1016/j.cirp.2018.04.019openalex-snapshot
Basic principles for the design of cutting edge roundings
inferred← citeshttps://doi.org/10.1016/j.cirp.2020.04.029openalex-snapshot
Size effect and friction in cutting of metals on the small scale
inferred← citeshttps://doi.org/10.1016/j.cirp.2021.03.002openalex-snapshot
A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools
inferred← citeshttps://doi.org/10.1016/j.cirp.2025.05.003openalex-snapshot
Revisiting machinability assessment: Towards total machining performance
inferred← citeshttps://doi.org/10.1016/j.cirpj.2009.09.001openalex-snapshot
Extension of cutting force formulae for microcutting
inferred← citeshttps://doi.org/10.1016/j.cirpj.2012.03.004openalex-snapshot
On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co inserts
inferred← citeshttps://doi.org/10.1016/j.cirpj.2014.07.001openalex-snapshot
Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling
inferred← citeshttps://doi.org/10.1016/j.cirpj.2020.06.004openalex-snapshot
Effect of cutting edge form factor (K-factor) on the performance of a face milling tool
inferred← citeshttps://doi.org/10.1016/j.cirpj.2026.09.012openalex-snapshot
Mechanistic analysis of process forces in machining of high-interstitial steel X30CrMnN18-18
inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111312openalex-snapshot
Micro drilling of carbon fiber reinforced polymer
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2004.12.003openalex-snapshot
The effects of chamfered and honed tool edge geometry in machining of three aluminum alloys
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2005.08.004openalex-snapshot
Experimental study of micro- and nano-scale cutting of aluminum 7075-T6
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2006.06.019openalex-snapshot
A model to calibrate and predict forces in machining with honed cutting tools or inserts
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2007.08.015openalex-snapshot
Mechanics of high speed cutting with curvilinear edge tools
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2007.08.022openalex-snapshot
A new approach for the friction identification during machining through the use of finite element modeling
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2008.05.001openalex-snapshot
The effect of tool edge radius on the contact phenomenon of tool-based micromachining
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2010.03.013openalex-snapshot
Experimental study of friction from cutting forces in orthogonal milling
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2011.12.006openalex-snapshot
Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2012.02.003openalex-snapshot
A new ternary-mechanism model for the prediction of cutting forces in flat end milling
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2012.09.003openalex-snapshot
A comparison of experimental estimation methods of the ploughing force in orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2014.09.013openalex-snapshot
Diamond machining of silicon: A review of advances in molecular dynamics simulation
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2014.11.004openalex-snapshot
Time domain prediction of milling stability according to cross edge radiuses and flank edge profiles
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2015.08.005openalex-snapshot
Generalized modeling of chip geometry and cutting forces in multi-point thread turning
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2016.01.006openalex-snapshot
Generalized mechanics and dynamics of metal cutting operations for unified simulations
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2019.103429openalex-snapshot
Experimental investigation of dynamic chip formation in orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2019.103470openalex-snapshot
A unified process damping model considering the varying stiffness of the milling system
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2021.103741openalex-snapshot
A strong basis for friction as the origin of size effect in cutting of metals
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2006.09.012openalex-snapshot
Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2009.05.005openalex-snapshot
Investigation of the effect of cutting tool edge radius on material separation due to ductile fracture in machining
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2010.12.007openalex-snapshot
Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2018.07.034openalex-snapshot
A semi-analytical modelling of cutting using crystal plasticity theory and flow line approach
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2018.12.005openalex-snapshot
Improved analytical prediction of burr formation in micro end milling
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2019.03.004openalex-snapshot
Research on the ploughing force in micro milling of soft-brittle crystals
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2019.105100openalex-snapshot
Finite element modeling of friction at the tool-chip-workpiece interface in high speed machining of Ti6Al4V
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2021.106673openalex-snapshot
Effects of cutting edge radius in vibration assisted micro machining
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2024.109231openalex-snapshot
Investigation of friction modeling on numerical Ti6Al4V cutting simulations
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2026.111955openalex-snapshot
Optimised PRCLT for characterising tool-chip friction in Udimet 720 Li
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2026.112064openalex-snapshot
Analytical prediction of large-scale internal gear form milling forces
inferred← citeshttps://doi.org/10.1016/j.ijrmms.2014.08.014openalex-snapshot
Experimental study of force responses in polycrystalline diamond face turning of rock
inferred← citeshttps://doi.org/10.1016/j.jclepro.2017.02.167openalex-snapshot
Plastic deformation and critical condition for orthogonal machining two-layered materials with laser cladded Cr-Ni-based stainless steel onto AISI 1045
inferred← citeshttps://doi.org/10.1016/j.jestch.2023.101563openalex-snapshot
The influence of cutting edge microgeometry on the broaching of Inconel 718 slots
inferred← citeshttps://doi.org/10.1016/j.jmapro.2013.02.006openalex-snapshot
From large-scale to micromachining: A review of force prediction models
inferred← citeshttps://doi.org/10.1016/j.jmapro.2018.05.024openalex-snapshot
The mystery of missing feed force — The effect of friction models, flank wear and ploughing on feed force in metal cutting simulations
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.08.033openalex-snapshot
Cutting edge preparation of cutting tools using plasma discharges in electrolyte
inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.09.020openalex-snapshot
Vibration-assisted micro milling of AISI 316L produced by laser-based powder bed fusion
inferred← citeshttps://doi.org/10.1016/j.jmapro.2022.03.037openalex-snapshot
State-of-the-art in cutting performance and surface integrity considering tool edge micro-geometry in metal cutting process
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.07.074openalex-snapshot
Mechanical behavior and modeling of grinding force: A comparative analysis
inferred← citeshttps://doi.org/10.1016/j.jmapro.2024.05.068openalex-snapshot
Research on cutting force of extrusion cutting process based on material flow characteristics
inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.06.025openalex-snapshot
Estimating the radii of rounded cutting edges in milling tools using measured ploughing force
inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.09.086openalex-snapshot
On texturing cBN grinding wheels and its effect on reduction of ploughing share and increased productivity
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2004.02.052openalex-snapshot
The determination of ploughing force and its influence on material properties in metal cutting
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.01.006openalex-snapshot
Modelling of cutting forces in ball-end milling with tool–surface inclination
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.01.007openalex-snapshot
Modelling of cutting forces in ball-end milling with tool–surface inclination
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.04.137openalex-snapshot
Investigations of tool edge radius effect in micromachining: A FEM simulation approach
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2008.01.022openalex-snapshot
Slipline field modeling of orthogonal machining for a worn tool with elastic effects and adhesion friction at the contact regions
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2008.10.013openalex-snapshot
A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2013.05.019openalex-snapshot
Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2015.12.020openalex-snapshot
Effects of tool axis offset in turn-milling process
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2020.116643openalex-snapshot
Analytical model of cutting temperature for workpiece surface layer during orthogonal cutting particle reinforced metal matrix composites
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2021.117302openalex-snapshot
Modelling of tool flank−workpiece interface friction considering temperature gradient and particle property for cutting SiCp/Al composites
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2021.117376openalex-snapshot
Investigating flank face friction during precision micro cutting of commercially pure titanium via plunging tests with diamond grooving tools
inferred← citeshttps://doi.org/10.1016/j.jmsy.2014.03.002openalex-snapshot
An innovative approach for automatic generation, verification and optimization of part programs in turning
inferred← citeshttps://doi.org/10.1016/j.medengphy.2013.05.012openalex-snapshot
Predictive force model for haptic feedback in bone sawing
inferred← citeshttps://doi.org/10.1016/j.msea.2007.04.116openalex-snapshot
Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024-T3
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2013.02.007openalex-snapshot
Parametric characterization of the geometry of honed cutting edges
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2015.12.004openalex-snapshot
Size effects in finish machining of porous powdered metal for engineered surface quality
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2016.03.012openalex-snapshot
Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2018.08.006openalex-snapshot
Tool-life criteria and wear behavior of single-edge ultra-small micro end mills
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2026.09.017openalex-snapshot
Cutting force prediction and contact behavior analysis of 4-flute flat end mills using three-dimensional finite element analysis
inferred← citeshttps://doi.org/10.1016/j.procir.2012.04.030openalex-snapshot
Cutting Edge Preparation to Enhance the Performance of Single Lip Deep Hole Drills
inferred← citeshttps://doi.org/10.1016/j.procir.2012.04.035openalex-snapshot
Machining Behaviour of Ti-6Al-4V and Ti-5553 All0oys in Interrupted Cutting with PVD Coated Cemented carbide
inferred← citeshttps://doi.org/10.1016/j.procir.2012.04.090openalex-snapshot
Cutting Tool Geometry for Plunge Milling–Process Optimization for a Stainless Steel
inferred← citeshttps://doi.org/10.1016/j.procir.2013.06.088openalex-snapshot
Modeling and Experimental Investigation of Edge Hone and Flank Contact Effects in Metal Cutting
inferred← citeshttps://doi.org/10.1016/j.procir.2014.04.029openalex-snapshot
An Experimental Study of Cryogenic Machining on Nanocrystalline Surface Layer Generation
inferred← citeshttps://doi.org/10.1016/j.procir.2014.04.032openalex-snapshot
Influence of Cutting Process Mechanics on Surface Integrity and Electrochemical Behavior of OFHC Copper
inferred← citeshttps://doi.org/10.1016/j.procir.2015.03.017openalex-snapshot
Analysis and Modelling of the Contact Radius Effect on the Cutting Forces in Cylindrical and Face Turning of Ti6Al4V Titanium Alloy
inferred← citeshttps://doi.org/10.1016/j.procir.2015.03.065openalex-snapshot
Springback in Metal Cutting with High Cutting Speeds
inferred← citeshttps://doi.org/10.1016/j.procir.2016.04.004openalex-snapshot
Effects of Different Cutting Edge Preparation Methods on Micro Milling Performance
inferred← citeshttps://doi.org/10.1016/j.procir.2017.03.323openalex-snapshot
Effects of Cutting Parameters over Turning of UDIMET ® 720 Superalloy in a Broaching Process Simulation
inferred← citeshttps://doi.org/10.1016/j.procir.2018.08.228openalex-snapshot
Probabilistic Prediction of Cutting and Ploughing Forces using Extended Kienzle Force Model in Orthogonal Turning Process
inferred← citeshttps://doi.org/10.1016/j.procir.2018.08.296openalex-snapshot
On the optimization of the cutting conditions for an improved corrosion resistance of OFHC copper
inferred← citeshttps://doi.org/10.1016/j.procir.2019.04.066openalex-snapshot
A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius
inferred← citeshttps://doi.org/10.1016/j.procir.2020.02.039openalex-snapshot
The effect of cutting edge geometry, nose radius and feed on surface integrity in finish turning of Ti-6Al4V
inferred← citeshttps://doi.org/10.1016/j.procir.2021.04.005openalex-snapshot
Flank face interaction in high magnitude chatter investigation in time domain.
inferred← citeshttps://doi.org/10.1016/j.procir.2021.09.080openalex-snapshot
The influences of process parameters on the thermo-mechanical workpiece load and the sub-surface residual stresses during peripheral milling of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.procir.2024.08.399openalex-snapshot
Investigations on chip breakability in lead-free brass alloy CW511L using different chip breaking geometries
inferred← citeshttps://doi.org/10.1016/j.procir.2025.02.076openalex-snapshot
Effects of the Tool Microgeometry on Thermo-Mechanical Loads for Ti-6Al-4V Finishing Cutting Operations
inferred← citeshttps://doi.org/10.1016/j.procir.2025.02.126openalex-snapshot
Effect of Radial Engagement and Feed Rate on the Thermal Evolution of Ti-6Al-4V alloys in Peripheral Milling Process
inferred← citeshttps://doi.org/10.1016/j.promfg.2016.08.030openalex-snapshot
Numerical Simulation of Chip Ploughing Volume and Forces in 5-axis CNC Micro-milling Using Flat-end Mills
inferred← citeshttps://doi.org/10.1016/j.triboint.2020.106380openalex-snapshot
Numerical modeling of micro-friction and fiber orientation effects on the machinability of green composites
inferred← citeshttps://doi.org/10.1016/j.tws.2020.106612openalex-snapshot
Mechanical performance and crashworthiness of plates and extrusions subjected to cutting: An overview
inferred← citeshttps://doi.org/10.1016/j.wear.2004.09.047openalex-snapshot
Tool-chip friction in machining with a large negative rake angle tool
inferred← citeshttps://doi.org/10.1016/j.wear.2005.02.072openalex-snapshot
Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts
inferred← citeshttps://doi.org/10.1016/j.wear.2005.12.007openalex-snapshot
Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing
inferred← citeshttps://doi.org/10.1016/j.wear.2007.11.025openalex-snapshot
An exploration of friction models for the chip–tool interface using an Arbitrary Lagrangian–Eulerian finite element model
inferred← citeshttps://doi.org/10.1016/j.wear.2013.12.020openalex-snapshot
Experimental investigation on friction under metal cutting conditions
inferred← citeshttps://doi.org/10.1016/j.wear.2024.205681openalex-snapshot
Influence of local tool angles and cutting conditions on abrasive wear in CFRP drilling
inferred← citeshttps://doi.org/10.1016/j.wear.2025.206235openalex-snapshot
Exploring the effects of cutting edge radius on intermittent turning based on experiment and simulation
inferred← citeshttps://doi.org/10.1016/s0022-5096(02)00060-1openalex-snapshot
Slip-line modeling of machining with a rounded-edge tool—Part I: new model and theory
inferred← citeshttps://doi.org/10.1016/s0022-5096(02)00061-3openalex-snapshot
Slip-line modeling of machining with a rounded-edge tool—Part II: analysis of the size effect and the shear strain-rate
inferred← citeshttps://doi.org/10.1016/s0890-6955(97)00022-9openalex-snapshot
The measurement of parasitic forces in orthogonal cutting
inferred← citeshttps://doi.org/10.1016/s0924-0136(99)00111-9openalex-snapshot
Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel
inferred← citeshttps://doi.org/10.1016/s1526-6125(02)70135-7openalex-snapshot
The Effects of Corner Radius and Edge Radius on Tool Flank Wear
inferred← citeshttps://doi.org/10.1016/s1526-6125(07)00005-9openalex-snapshot
A Simplified Model for Ploughing Forces in Turning
inferred← citeshttps://doi.org/10.1051/matecconf/201820202006openalex-snapshot
Chatter Behavior in the Milling Process of Inconel 718: Effects of Tool Edge Radius
inferred← citeshttps://doi.org/10.1051/mfreview/2018014openalex-snapshot
Forces prediction in micro-grinding single-crystal copper considering the crystallographic orientation
inferred← citeshttps://doi.org/10.1080/00207546108943077openalex-snapshot
ON THE SELECTION OF ECONOMICAL MACHINING RATES
showing the first 200 of 290 · page through all 290
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.