On the public citation graph

Liquid Density of Biofuel Additives: 1-Butoxybutane at Pressures up to 140 MPa and from (293.15 to 393.15) K

0 signed · 61 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1006/jcht.2001.0942openalex-snapshot

Excess molar volumes, and excess molar enthalpies of (-methyl-2-pyrrolidinone+ an ether ) at the temperature 298.15 K

inferredcites →https://doi.org/10.1007/s10765-006-0139-xopenalex-snapshot

Compressed Liquid Densities of 1-Pentanol and 2-Pentanol from 313 to 363 K at Pressures to 25 MPa

inferredcites →https://doi.org/10.1016/0378-3812(95)02762-4openalex-snapshot

Excess molar volumes of 1-alcohol + aliphatic monoethers at 298.15 K

inferredcites →https://doi.org/10.1016/j.fluid.2006.06.017openalex-snapshot

Isobaric vapor–liquid equilibria for the binary systems 1-propyl alcohol+dipropyl ether and 1-butyl alcohol+dibutyl ether at 20 and 101.3kPa

inferredcites →https://doi.org/10.1016/j.fluid.2006.12.011openalex-snapshot

Stereoisomeric effects on volumetric properties under pressure for the system cis-+trans-decalin

inferredcites →https://doi.org/10.1016/j.fluid.2007.01.020openalex-snapshot

Corrigendum to “Volumetric and derivative properties under pressure for the system 1-propanol + toluene: A discussion of PC-SAFT and SAFT-VR” [Fluid Phase Equilib. 247 (2006) 121–134]

inferredcites →https://doi.org/10.1016/j.fluid.2008.06.007openalex-snapshot

Liquid density of 1-pentanol at pressures up to 140MPa and from 293.15 to 403.15K

inferredcites →https://doi.org/10.1016/j.jct.2005.01.002openalex-snapshot

Volumetric properties of (N,N-dimethylformamide + aliphatic diethers) at temperatures ranging from (298.15 to 358.15) K

inferredcites →https://doi.org/10.1016/j.jct.2005.01.004openalex-snapshot

(Liquid + liquid) equilibrium of (dibutyl ether + methanol + water) at different temperatures

inferredcites →https://doi.org/10.1016/j.jct.2007.07.005openalex-snapshot

Compressed liquid densities and excess molar volumes for (CO2+ 1-pentanol) binary system at temperatures from 313 to 363 K and pressures up to 25 MPa

inferredcites →https://doi.org/10.1016/j.jct.2008.01.006openalex-snapshot

High-pressure (up to 140 MPa) density and derivative properties of some (pentyl-, hexyl-, and heptyl-) amines between (293.15 and 353.15) K

inferredcites →https://doi.org/10.1016/j.molliq.2009.10.002openalex-snapshot

Volumetric, acoustic and refractive properties at several temperatures of dibutyl ether+1-chlorobutane system

inferredcites →https://doi.org/10.1016/s0040-6031(00)00575-xopenalex-snapshot

Temperature dependence of excess properties in alcohols+ethers mixtures.

inferredcites →https://doi.org/10.1021/je00022a025openalex-snapshot

Excess Molar Enthalpies of 1,1,2,2-Tetrachloroethane with Acetone, Dibutyl Ether, Acetonitrile, and Dimethyl Sulfoxide at 298.15 K

inferredcites →https://doi.org/10.1021/je034022nopenalex-snapshot

Densities, Excess Molar Volumes at T = (298.15 to 313.15) K, Speeds of Sound, Excess Isentropic Compressibilities, Relative Permittivities, and Deviations in Molar Polarizations at T = (298.15 and 308.15) K for Methyl Methacrylate + 2-Butoxyethanol or Dibutyl Ether + Benzene, Toluene, or p-Xylene

inferredcites →https://doi.org/10.1021/je049685zopenalex-snapshot

Density Measurements under Pressure for the Binary System 1-Propanol + Toluene

inferredcites →https://doi.org/10.1021/je0500936openalex-snapshot

Volumetric Properties of 1-Phenyldecane and 1-Phenylundecane at Pressures to 65 MPa and Temperature between 293.15 and 353.15 K

inferredcites →https://doi.org/10.1021/je050261uopenalex-snapshot

High-Pressure Density Measurements for the Binary System Ethanol + Heptane

inferredcites →https://doi.org/10.1021/je600578uopenalex-snapshot

Isothermal Vapor−Liquid Equilibrium at 333.15 K, Density, and Refractive Index at 298.15 K for the Ternary Mixture of Dibutyl Ether + Ethanol + Benzene and Binary Subsystems

inferredcites →https://doi.org/10.1021/je700224jopenalex-snapshot

High-Pressure Volumetric Properties of Imidazolium-Based Ionic Liquids: Effect of the Anion

inferredcites →https://doi.org/10.1021/je700737copenalex-snapshot

Density of Diethyl Adipate using a New Vibrating Tube Densimeter from (293.15 to 403.15) K and up to 140 MPa. Calibration and Measurements

inferredcites →https://doi.org/10.1021/je800446copenalex-snapshot

Binary Liquid−Liquid Equilibrium (LLE) for Dibutyl Ether (DBE) + Water from (288.15 to 318.15) K and Ternary LLE for Systems of DBE + C1 ∼ C4 Alcohols + Water at 298.15 K

inferredcites →https://doi.org/10.1021/je8005369openalex-snapshot

Viscosity and Density Measurements of Diisopropyl Ether and Dibutyl Ether at Different Temperatures and Pressures

inferredcites →https://doi.org/10.1021/je960179mopenalex-snapshot

Excess Molar Volumes and Excess Molar Heat Capacities for Binary Mixtures of Ethanol with Chlorocyclohexane, 1-Nitropropane, Dibutyl Ether, and Ethyl Acetate at the Temperature of 298.15 K

inferredcites →https://doi.org/10.1021/je970086kopenalex-snapshot

Excess Molar Volumes and Excess Molar Heat Capacities of Mixtures Containing (Mono and Poly)ethers + Ethyl Acetate

inferredcites →https://doi.org/10.1023/a:1006606122944openalex-snapshot

pρT Measurements of Polyethylene Glycol Dimethylethers Between 278.15 and 328.15 K at Pressures to 12 MPa

inferredcites →https://doi.org/10.1023/a:1010770831215openalex-snapshot

High-Pressure Measurements of the Viscosity and Density of Two Polyethers and Two Dialkyl Carbonates

inferredcites →https://doi.org/10.1039/b104891kopenalex-snapshot

Isobaric thermal expansivity and thermophysical characterization of liquids and liquid mixturesElectronic Supplementary Information available. See http://www.rsc.org/suppdata/cp/b1/b104891k/

inferredcites →https://doi.org/10.1063/1.1461829openalex-snapshot

The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use

inferredcites →https://doi.org/10.1088/0957-0233/3/8/002openalex-snapshot

Densimeter calibration method versus temperature and pressure

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4666284openalex-extracted

Liquid Density of Binary Mixtures of N-Pentane and N-Dodecane at Temperatures from 283 to 363 K and Pressures Up to 100 Mpa

inferred← citeshttps://doi.org/10.2139/ssrn.4773908openalex-extracted

Experimental Investigation on the Liquid Density of Co2 + N-Decane at Temperatures from 283 K to 363 K and Pressures Up to 100 Mpa

inferred← citeshttps://doi.org/10.1016/j.catcom.2011.07.018openalex-snapshot

Etherification of n-butanol to di-n-butyl ether over H3PMo12−W O40 (x= 0, 3, 6, 9, 12) Keggin and H6P2Mo18−W O62 (x= 0, 3, 9, 15, 18) Wells–Dawson heteropolyacid catalysts

inferred← citeshttps://doi.org/10.1016/j.cej.2013.05.072openalex-snapshot

Effect of 3D open-pores on the dehydration of n-butanol to di-n-butyl ether (DNBE) over a supported heteropolyacid catalyst

inferred← citeshttps://doi.org/10.1016/j.fluid.2012.02.007openalex-snapshot

Liquid density of oxygenated additives to bio-fuels: 1-Hexanol at pressures up to 140MPa and from 293.15K to 403.15K

inferred← citeshttps://doi.org/10.1016/j.fluid.2012.12.023openalex-snapshot

Density of normal and associated liquids

inferred← citeshttps://doi.org/10.1016/j.fluid.2013.11.031openalex-snapshot

(p, VE, T) Measurements of mixtures (DBE+alcohol) at temperatures from (293.15 to 353.15)K and at pressures up to 140MPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2016.02.009openalex-snapshot

Experimental and modeled volumetric behavior of linear and branched ethers

inferred← citeshttps://doi.org/10.1016/j.fluid.2017.10.027openalex-snapshot

Thermodynamic properties and sPC-SAFT modeling of 2-ethoxyethanol, 2-propoxyethanol and 2-butoxyethanol from T = (293.15–413.15) K and pressure up to 30 MPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2017.12.010openalex-snapshot

Compressed liquid densities of binary mixtures of n -decane + n -dodecane at temperatures from 283 K to 363 K and pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2018.07.027openalex-snapshot

Isobaric vapor-liquid equilibrium, density and speed of sound of binary mixtures 2,2,4-trimethylpentane + 1-butanol or dibutyl ether (DBE) at 101.3 kPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2024.114078openalex-snapshot

Liquid density of binary mixtures of n-pentane and n-dodecane at temperatures from 283K to 363K and pressures up to 100MPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2025.114501openalex-snapshot

Experimental investigation of liquid density for n-pentane + n-decane mixtures at temperatures from 283 K to 363 K and pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1016/j.fluid.2026.114815openalex-snapshot

Measurement and correlation of the liquid pvTx properties for R125 + R1234yf, R125 + R1234ze(E), and R143a + R1234yf mixtures

inferred← citeshttps://doi.org/10.1016/j.ijrefrig.2024.07.012openalex-snapshot

Experimental measurements and correlations of the compressed liquid densities for n-nonane + cyclopentane

inferred← citeshttps://doi.org/10.1016/j.jct.2011.06.006openalex-snapshot

Liquid density of biofuel mixtures: (Dibutyl ether + 1-butanol) system at pressures up to 140 MPa and temperatures from (293.15 to 393.15) K

inferred← citeshttps://doi.org/10.1016/j.jct.2012.05.016openalex-snapshot

Liquid density of oxygenated additive 2-propanol at pressures up to 140 MPa and from 293.15 K to 403.15 K

inferred← citeshttps://doi.org/10.1016/j.jct.2013.09.035openalex-snapshot

Liquid density of HFE-7200 and HFE-7500 from T= (283 to 363) K at pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1016/j.jct.2014.05.017openalex-snapshot

Liquid density of HFE-7000 and HFE-7100 from T= (283 to 363) K at pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1016/j.jct.2014.08.023openalex-snapshot

Liquid density of oxygenated additive 2,4-dimethyl-3-oxapentane at pressures up to 140 MPa and temperatures from (293.15 to 393.29) K

inferred← citeshttps://doi.org/10.1016/j.jct.2017.10.012openalex-snapshot

High pressure densities of two nanostructured liquids based on the bis(trifluoromethylsulfonyl)imide anion from (278 to 398) K and up to 120 MPa

inferred← citeshttps://doi.org/10.1016/j.jct.2018.11.010openalex-snapshot

Experimental density and PC-SAFT modeling of biofuel mixtures (DBE + 1-Heptanol) at temperatures from (298.15 to 393.15) K and at pressures up to 140 MPa

inferred← citeshttps://doi.org/10.1016/j.jct.2019.105935openalex-snapshot

Compressed liquid densities of binary mixtures of difluoromethane (R32) and 2,3,3,3-tetrafluoroprop-1-Ene (R1234yf) at temperatures from (283 to 363) K and pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1021/acs.jced.0c00845openalex-snapshot

Density and Viscosity Measurements of 1-Dodecanol and 1,12-Dodecanediol at Temperatures of up to 573.15 K and Pressures of up to 10 MPa

inferred← citeshttps://doi.org/10.1021/acs.jced.1c00178openalex-snapshot

Vapor–Liquid Equilibrium, Surface Tension, and Dynamic Viscosity for the Propan-1-ol + Dibutyl Ether Binary Mixture

inferred← citeshttps://doi.org/10.1021/acs.jced.5b00385openalex-snapshot

Liquid Density of 2-Methoxyethyl Acetate, 2-Ethylhexyl Acetate, and Diethyl Succinate at Temperatures from 283.15 K to 363.15 K and Pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1021/acs.jced.6b01024openalex-snapshot

Compressed Liquid Viscosity of 2-Methylpentane, 3-Methylpentane, and 2,3-Dimethylbutane at Temperatures from (273 to 343) K and Pressures up to 40 MPa

inferred← citeshttps://doi.org/10.1021/acs.jced.6c00001openalex-snapshot

Investigation of Density and Viscosity for Ternary Blends of n -Butyl Ether + Methyl Laurate + n -Nonane at T = 293.15–323.15 K

inferred← citeshttps://doi.org/10.1021/acs.jced.8b00229openalex-snapshot

Liquid Density of n-Pentene, n-Hexene, and n-Heptene at Temperatures from 283.15 to 363.15 K and Pressures up to 100 MPa

inferred← citeshttps://doi.org/10.1021/acs.jpcb.0c10076openalex-snapshot

Theoretical and Experimental Study of the Excess Thermodynamic Properties of Highly Nonideal Liquid Mixtures of Butanol Isomers + DBE

inferred← citeshttps://doi.org/10.9713/kcer.2012.50.2.251openalex-snapshot

Etherification of n-Butanol to Di-n-Butyl Ether over H3+xPW12-xNbxO40(x=0, 1, 2, 3) Keggin and H6+xP2W18-xNbxO62(x=0, 1, 2, 3) Wells-Dawson Heteropolyacid Catalysts

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.