On the public citation graph

Experimental Investigation on the Liquid Density of Co2 + N-Decane at Temperatures from 283 K to 363 K and Pressures Up to 100 Mpa

https://doi.org/10.2139/ssrn.4773908
0 signed · 36 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/bf00503881openalex-extracted
Pressure dependence of the density of n-alkanes
inferredcites →https://doi.org/10.1016/0021-9614(78)90144-1openalex-extracted
Isothermal compressibilities of n-alkanes and benzene
inferredcites →https://doi.org/10.1016/0378-3812(86)87046-7openalex-extracted
Densities and heat capacities of 1-butanol + n-decane from 298 K to 400 K
inferredcites →https://doi.org/10.1016/j.apenergy.2011.03.052openalex-extracted
PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models
inferredcites →https://doi.org/10.1016/j.fluid.2012.09.037openalex-extracted
Measurement and correlation of saturated liquid properties and gas solubility for decane, tetradecane and their binary mixtures saturated with carbon dioxide
inferredcites →https://doi.org/10.1016/j.fluid.2015.05.028openalex-extracted
Modelling the impact of geochemical reactions on hydrocarbon phase behavior during CO2 gas injection for enhanced oil recovery
inferredcites →https://doi.org/10.1016/j.fluid.2017.12.010openalex-extracted
Compressed liquid densities of binary mixtures of n -decane + n -dodecane at temperatures from 283 K to 363 K and pressures up to 100 MPa
inferredcites →https://doi.org/10.1016/j.ijggc.2014.04.006openalex-extracted
CO2-EOR and storage design optimization
inferredcites →https://doi.org/10.1016/j.ijggc.2016.07.045openalex-extracted
Simulation and measurements of volumetric and phase behavior of carbon dioxide + higher alkanes at high pressure: CO 2 + n -decane at temperatures (313–410) K and pressures up to 76 MPa
inferredcites →https://doi.org/10.1016/j.jct.2008.01.006openalex-extracted
High-pressure (up to 140 MPa) density and derivative properties of some (pentyl-, hexyl-, and heptyl-) amines between (293.15 and 353.15) K
inferredcites →https://doi.org/10.1016/j.jct.2008.12.020openalex-extracted
Automated densimetric system: Measurements and uncertainties for compressed fluids
inferredcites →https://doi.org/10.1016/j.jct.2011.04.011openalex-extracted
Compressed liquid density measurements of dimethyl ether with a vibrating tube densimeter
inferredcites →https://doi.org/10.1016/j.jct.2011.08.016openalex-extracted
Compressed liquid densities for the (n-heptane +n-decane) and (n-octane +n-decane) systems from T=(313 to 363) K
inferredcites →https://doi.org/10.1016/j.jct.2012.08.019openalex-extracted
Phase composition and saturated liquid properties in binary and ternary systems containing carbon dioxide, n-decane, and n-tetradecane
inferredcites →https://doi.org/10.1016/j.jct.2013.01.006openalex-extracted
Density measurements for 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) and trans-1,3,3,3-tetrafluoropropene (R1234ze(E))
inferredcites →https://doi.org/10.1016/j.jct.2016.05.013openalex-extracted
Volumetric properties of binary mixtures of {difluoromethane (R32) + trans-1,3,3,3-tetrafluoropropene (R1234ze(E))} at temperatures from 283.15 K to 363.15 K and pressures up to 100 MPa
inferredcites →https://doi.org/10.1016/j.molliq.2021.116646openalex-extracted
Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa
inferredcites →https://doi.org/10.1016/j.supflu.2011.06.004openalex-extracted
High pressure densities of carbon dioxide + dipentaerythritol hexaheptanoate: New experimental setup and volumetric behavior
inferredcites →https://doi.org/10.1016/j.supflu.2016.01.002openalex-extracted
Volumetric behaviour of (carbon dioxide + hydrocarbon) mixtures at high pressures
inferredcites →https://doi.org/10.1016/s0021-9614(02)00128-3openalex-extracted
Temperature dependence of the excess molar volume of (heptane+1-chloroalkane)
inferredcites →https://doi.org/10.1016/s0021-9614(02)00307-5openalex-extracted
Excess molar volumes of (octane + 1-chlorobutane) at temperatures between 298.15 and 328.15 K and at pressures up to 40 MPa
inferredcites →https://doi.org/10.1016/s0021-9614(05)80173-9openalex-extracted
Heat capacities and densities of liquid n-octane, n-nonane, n-decane, and n-hexadecane at temperatures from 318.15 K to 373.15 K and at pressures up to 10 MPa
inferredcites →https://doi.org/10.1021/acs.jced.5b00385openalex-extracted
Liquid Density of 2-Methoxyethyl Acetate, 2-Ethylhexyl Acetate, and Diethyl Succinate at Temperatures from 283.15 K to 363.15 K and Pressures up to 100 MPa
inferredcites →https://doi.org/10.1021/acs.jced.7b00176openalex-extracted
Compressed Liquid Densities of Binary Mixtures of 1-Butanol and Diethylene Glycol Dimethyl Ether from (283 to 363) K at Pressures up to 100 MPa
inferredcites →https://doi.org/10.1021/acs.jced.8b00229openalex-extracted
Liquid Density of n-Pentene, n-Hexene, and n-Heptene at Temperatures from 283.15 to 363.15 K and Pressures up to 100 MPa
inferredcites →https://doi.org/10.1021/ie50361a026openalex-extracted
Phase Equilibria in Hydrocarbon Systems
inferredcites →https://doi.org/10.1021/ie50365a034openalex-extracted
Phase Equilibria in Hydrocarbon Systems Methane–Decane System1
inferredcites →https://doi.org/10.1021/je00038a008openalex-extracted
Densities and viscosities of mixtures of carbon dioxide and n-decane from 310 to 403 K and 7 to 30 MPa
inferredcites →https://doi.org/10.1021/je010016kopenalex-extracted
Volumetric Behavior of Decane + Carbon Dioxide at High Pressures. Measurement and Calculation
inferredcites →https://doi.org/10.1021/je0342320openalex-extracted
pρTx Data for the Dimethyl Carbonate + Decane System
inferredcites →https://doi.org/10.1021/je050020mopenalex-extracted
Compressed Liquid Densities and Excess Volumes of CO2 + Decane Mixtures from (313 to 363) K and Pressures up to 25 MPa
inferredcites →https://doi.org/10.1021/je0500936openalex-extracted
Volumetric Properties of 1-Phenyldecane and 1-Phenylundecane at Pressures to 65 MPa and Temperature between 293.15 and 353.15 K
inferredcites →https://doi.org/10.1021/je101286aopenalex-extracted
Liquid Density of Biofuel Additives: 1-Butoxybutane at Pressures up to 140 MPa and from (293.15 to 393.15) K
inferredcites →https://doi.org/10.1021/je300388bopenalex-extracted
Densities and Volumetric Characteristics of Binary System of CO2 + Decane from (303.15 to 353.15) K and Pressures up to 19 MPa
inferredcites →https://doi.org/10.1021/je8006875openalex-extracted
Thermophysical Characterization of Liquids Using Precise Density and Isobaric Heat Capacity Measurements As a Function of Pressure
inferredcites →https://doi.org/10.1080/01496395.2013.811422openalex-extracted
Supercritical Fluid Extraction Using CO2: Main Applications and Future Perspectives
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.