On the public citation graph

Cooling of Automotive Traction Motors: Schemes, Examples, and Computation Methods

https://doi.org/10.1109/tie.2018.2835397

0 signed · 406 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/9781118886663openalex-snapshot

Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair

inferredcites →https://doi.org/10.1007/s002310000139openalex-snapshot

An experimental investigation on performance of fins on a horizontal base in free convection heat transfer

inferredcites →https://doi.org/10.1016/0142-727x(92)90020-aopenalex-snapshot

An experimental investigation into the effects of rotation on the isothermal flow resistance in circular tubes rotating about a parallel axis

inferredcites →https://doi.org/10.1016/1359-4311(96)00026-9openalex-snapshot

Transient state study of electric motor heating and phase change solid-liquid cooling

inferredcites →https://doi.org/10.1016/j.apacoust.2006.07.012openalex-snapshot

Reduction of the tonal noise annoyance of axial flow fans by means of optimal blade spacing

inferredcites →https://doi.org/10.1016/j.enconman.2008.01.014openalex-snapshot

Correlation to predict heat transfer of an oscillating loop heat pipe consisting of three interconnected columns

inferredcites →https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.003openalex-snapshot

Numerical investigation of tube-side fully developed turbulent flow and heat transfer in outward corrugated tubes

inferredcites →https://doi.org/10.1016/j.ijthermalsci.2006.01.017openalex-snapshot

Convective heat transfer inside a rotating cylinder with an axial air flow

inferredcites →https://doi.org/10.1016/j.jppr.2017.05.007openalex-snapshot

An experimental study of rotational pressure loss in rotor-stator gap

inferredcites →https://doi.org/10.1049/cp:20020121openalex-snapshot

Permanent magnet generator options for the More Electric Aircraft

inferredcites →https://doi.org/10.1080/01457630601023245openalex-snapshot

Next Generation Spray Cooling: High Heat Flux Management in Compact Spaces

inferredcites →https://doi.org/10.1109/20.877699openalex-snapshot

3D thermal stress analysis of the rotor of an induction motor

inferredcites →https://doi.org/10.1109/28.936405openalex-snapshot

Operating temperature considerations and performance characteristics for IEEE 841 motors

inferredcites →https://doi.org/10.1109/epepemc.2012.6397424openalex-snapshot

Analyzing of two types water cooling electric motors using computational fluid dynamics

inferredcites →https://doi.org/10.1109/ever.2016.7476345openalex-snapshot

Design of a 50000 rpm high-speed high-power six-phase PMSM for use in aircraft applications

inferredcites →https://doi.org/10.1109/ias.1998.732257openalex-snapshot

Determination of optimal thermal parameters for brushless permanent magnet motor design

inferredcites →https://doi.org/10.1109/icelmach.2008.4799857openalex-snapshot

Computations on heat transfer in axial flux permanent magnet machines

inferredcites →https://doi.org/10.1109/icelmach.2010.5607893openalex-snapshot

A combined electromagnetic and thermal optimisation of an aerospace electric motor

inferredcites →https://doi.org/10.1109/icelmach.2012.6350138openalex-snapshot

Thermal modeling of directly-oil-cooled permanent magnet synchronous machine

inferredcites →https://doi.org/10.1109/icems.2009.5382930openalex-snapshot

Study on spraying evaporative cooling technology for the large electrical machine

inferredcites →https://doi.org/10.1109/icems.2015.7385321openalex-snapshot

Heat transfer characteristics of spray evaporative cooling system for large electrical machines

inferredcites →https://doi.org/10.1109/iemdc.2001.939386openalex-snapshot

Improvement of the cooling performance of symmetrically self-ventilated induction machines in the 2-15 MW range

inferredcites →https://doi.org/10.1109/iemdc.2011.5994765openalex-snapshot

A Brushless DC motor design for an aircraft electro-hydraulic actuation system

inferredcites →https://doi.org/10.1109/iemdc.2015.7409186openalex-snapshot

On the effects of high-temperature-induced aging on electrical machine windings

inferredcites →https://doi.org/10.1109/iemdc.2015.7409311openalex-snapshot

Indirect slot cooling for high-power-density machines with concentrated winding

inferredcites →https://doi.org/10.1109/iemdc.2017.8002214openalex-snapshot

Electromagnetic and thermal coupling within a fault-tolerant aircraft propulsion motor

inferredcites →https://doi.org/10.1109/iemdc.2017.8002307openalex-snapshot

Shaft cooling and the influence on the electromagnetic performance of traction motors

inferredcites →https://doi.org/10.1109/ievc.2012.6183163openalex-snapshot

Direct oil cooling of traction motors in hybrid drives

inferredcites →https://doi.org/10.1109/lmag.2013.2286582openalex-snapshot

Thermal Effects on Inductor Winding Resistance at High Frequencies

inferredcites →https://doi.org/10.1109/mias.2014.2345810openalex-snapshot

Cool Facts About Cooling Electric Motors: Improvements in Applications That Fall Outside the Normal Operating Conditions

inferredcites →https://doi.org/10.1109/pcicon.2000.882764openalex-snapshot

Operating temperature considerations and performance characteristics for IEEE 841 motors

inferredcites →https://doi.org/10.1109/pcicon.2013.6666044openalex-snapshot

Cool facts about cooling electric motors

inferredcites →https://doi.org/10.1109/speedam.2016.7525851openalex-snapshot

Measurement of rare earth magnets at high temperatures

inferredcites →https://doi.org/10.1109/tdei.2002.1038660openalex-snapshot

Progress in electrothermal life modeling of electrical insulation during the last decades

inferredcites →https://doi.org/10.1109/tec.2006.874245openalex-snapshot

Improved Cooling Performance of Large Motors Using Fans

inferredcites →https://doi.org/10.1109/tec.2007.914356openalex-snapshot

Research on the Cooling System of a 4QT Prototype Machine Used for HEV

inferredcites →https://doi.org/10.1109/tec.2010.2047042openalex-snapshot

Effects of Fan Blade Forward-Swept and Inclined Amounts in Electric Motors

inferredcites →https://doi.org/10.1109/tec.2011.2157347openalex-snapshot

Design and Performance of a Water-cooled Permanent Magnet Retarder for Heavy Vehicles

inferredcites →https://doi.org/10.1109/tec.2011.2177465openalex-snapshot

Experimental Investigation of Contact Resistance for Water Cooled Jacket for Electric Motors and Generators

inferredcites →https://doi.org/10.1109/tec.2013.2283089openalex-snapshot

Thermal Modeling of Directly Cooled Electric Machines Using Lumped Parameter and Limited CFD Analysis

inferredcites →https://doi.org/10.1109/tec.2015.2424400openalex-snapshot

Thermal Modeling and Analysis of a Double-Stator Switched Reluctance Motor

inferredcites →https://doi.org/10.1109/tec.2017.2662579openalex-snapshot

Comparative Assessment of Single Piece and Fir-Tree-Based Spoke Type Rotor Designs for Low-Cost Electric Vehicle Application

inferredcites →https://doi.org/10.1109/tia.2002.805574openalex-snapshot

Motor temperature considerations for pulp and paper mill applications

inferredcites →https://doi.org/10.1109/tia.2013.2256872openalex-snapshot

Development of a Totally Enclosed Fan-Cooled Traction Motor

inferredcites →https://doi.org/10.1109/tia.2013.2288216openalex-snapshot

Totally Enclosed Fan-Cooled Squirrel-Cage Induction Motor Options

inferredcites →https://doi.org/10.1109/tia.2014.2305804openalex-snapshot

Advanced High-Power-Density Interior Permanent Magnet Motor for Traction Applications

inferredcites →https://doi.org/10.1109/tia.2014.2345955openalex-snapshot

Coupled Electromagnetic–Thermal Analysis of Electric Machines Including Transient Operation Based on Finite-Element Techniques

inferredcites →https://doi.org/10.1109/tia.2014.2365198openalex-snapshot

Modeling and Investigation of Thermal Characteristics of a Water-Cooled Permanent-Magnet Linear Motor

inferredcites →https://doi.org/10.1109/tia.2015.2405051openalex-snapshot

Optimization of an 80-kW Segmental Rotor Switched Reluctance Machine for Automotive Traction

inferredcites →https://doi.org/10.1109/tia.2015.2409260openalex-snapshot

Thermal Model of Totally Enclosed Water-Cooled Permanent-Magnet Synchronous Machines for Electric Vehicle Application

inferredcites →https://doi.org/10.1109/tia.2016.2518132openalex-snapshot

Modern Heat Extraction Systems for Power Traction Machines—A Review

inferredcites →https://doi.org/10.1109/tia.2017.2672921openalex-snapshot

Advanced Cooling Methods for High-Speed Electrical Machines

inferredcites →https://doi.org/10.1109/tia.2017.2675986openalex-snapshot

Fan Performance Analysis for Rotor Cooling of Axial Flux Permanent Magnet Machines

inferredcites →https://doi.org/10.1109/tia.2017.2691731openalex-snapshot

Numerical Study of Convective Heat Transfer in the End Regions of a Totally Enclosed Permanent Magnet Synchronous Machine

inferredcites →https://doi.org/10.1109/tie.2008.922604openalex-snapshot

Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal Models

inferredcites →https://doi.org/10.1109/tie.2008.927242openalex-snapshot

Thermal Model and Behavior of a Totally-Enclosed-Water-Cooled Squirrel-Cage Induction Machine for Traction Applications

inferredcites →https://doi.org/10.1109/tie.2008.928150openalex-snapshot

Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors

inferredcites →https://doi.org/10.1109/tie.2010.2089940openalex-snapshot

A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent-Magnet Motors

inferredcites →https://doi.org/10.1109/tie.2013.2286081openalex-snapshot

Design of Cooling Systems Using Computational Fluid Dynamics and Analytical Thermal Models

inferredcites →https://doi.org/10.1109/tie.2014.2303779openalex-snapshot

Experimentation of an Electric Machine Technology Demonstrator Incorporating Direct Winding Heat Exchangers

inferredcites →https://doi.org/10.1109/tie.2015.2472517openalex-snapshot

High-Performance Low-Cost Electric Motor for Electric Vehicles Using Ferrite Magnets

inferredcites →https://doi.org/10.1109/tie.2015.2500194openalex-snapshot

Development of a Yokeless and Segmented Armature Axial Flux Machine

inferredcites →https://doi.org/10.1109/tie.2017.2681975openalex-snapshot

Direct Liquid Cooling Method Verified With an Axial-Flux Permanent-Magnet Traction Machine Prototype

inferredcites →https://doi.org/10.1109/tie.2017.2748051openalex-snapshot

Cooling Fin Optimization on a TEFC Electrical Machine Housing Using a 2-D Conjugate Heat Transfer Model

inferredcites →https://doi.org/10.1109/tie.2017.2762625openalex-snapshot

Production and Application of HPMS Recycled Bonded Permanent Magnets for a Traction Motor Application

inferredcites →https://doi.org/10.1109/tmag.2009.2033592openalex-snapshot

Interdependence of Demagnetization, Loading, and Temperature Rise in a Permanent-Magnet Synchronous Motor

inferredcites →https://doi.org/10.1109/tphp.1974.1134861openalex-snapshot

Free Convection Heat Transfer from Vertical Fin-Arrays

inferredcites →https://doi.org/10.1115/1.2910635openalex-snapshot

Correlating Equations for Impingement Cooling of Small Heat Sources With Single Circular Liquid Jets

inferredcites →https://doi.org/10.1115/1.2911423openalex-snapshot

Correlating Equations for Impingement Cooling of Small Heat Sources With Multiple Circular Liquid Jets

inferredcites →https://doi.org/10.1115/1.3240633openalex-snapshot

Turbulent Flow in Axially Rotating Pipes

inferredcites →https://doi.org/10.1115/1.3449648openalex-snapshot

Optimum Arrangement of Rectangular Fins on Horizontal Surfaces for Free-Convection Heat Transfer

inferredcites →https://doi.org/10.1115/1.3614318openalex-snapshot

Natural Convection Heat Transfer From Horizontal Rectangular Fin Arrays

inferredcites →https://doi.org/10.1243/09544062jmes1869openalex-snapshot

An experimental study on the reduction of motor-fan noise by modification of the blade and shroud configuration

inferredcites →https://doi.org/10.1299/jsme1958.5.302openalex-snapshot

Resistance of a Flow through an Annulus with an Inner Rotating Cylinder

inferredcites →https://doi.org/10.2172/1007833openalex-snapshot

Evaluation of the 2010 Toyota Prius Hybrid Synergy Drive System

inferredcites →https://doi.org/10.2172/1349258openalex-snapshot

Brushless and Permanent Magnet Free Wound Field Synchronous Motors for EV Traction

inferredcites →https://doi.org/10.3397/1.3701043openalex-snapshot

Optimization of axial fans with highly swept blades with respect to losses and noise reduction

inferredcites →https://doi.org/10.5075/epfl-thesis-5225openalex-snapshot

Cooling High Heat Flux Micro-Electronic Systems using Refrigerants in High Aspect Ratio Multi-Microchannel Evaporators

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4155129openalex-extracted

Thermal Analysis of the Oil Cooling Efficiency of a Motor According to the Churning Phenomenon

inferred← citeshttps://doi.org/10.2139/ssrn.4471710openalex-extracted

inferred← citeshttps://doi.org/10.2139/ssrn.4668038openalex-extracted

Thermal Analysis and Cooling Solutions for Permanent Magnet Synchronous Motors in Electric Vehicles

inferred← citeshttps://doi.org/10.1002/9781119636151.ch9openalex-snapshot

Thermal Analysis of Synchronous Generators

inferred← citeshttps://doi.org/10.1002/adem.202301998openalex-snapshot

Study of an Active Heat‐Dissipating Liquid Metal Wire with Electrical‐Material Cotransmission Characteristics and Its Applications

inferred← citeshttps://doi.org/10.1007/978-3-658-42048-2_35openalex-snapshot

Simulation-Based Development of Thermal Management for Heavy Duty Fuel Cell Commercial Vehicles

inferred← citeshttps://doi.org/10.1007/978-3-658-47675-5_6openalex-snapshot

Phase Change Cooling – Future Potentials of E-drives under New Cooling Conditions

inferred← citeshttps://doi.org/10.1007/s00202-020-01098-0openalex-snapshot

Determination of electric motor losses and critical temperatures through an inverse approach

inferred← citeshttps://doi.org/10.1007/s00202-020-01132-1openalex-snapshot

Determination of heat transfer coefficient of finned housing of a TEFC variable speed motor

inferred← citeshttps://doi.org/10.1007/s00502-025-01331-3openalex-snapshot

Advances in electric motors: a review and benchmarking of product design and manufacturing technologies

inferred← citeshttps://doi.org/10.1007/s10973-024-13091-xopenalex-snapshot

Review on cooling techniques and analysis methods of an electric vehicle motor

inferred← citeshttps://doi.org/10.1007/s10973-025-14432-0openalex-snapshot

Experimental and numerical thermal analysis of a 1.2-kW air-cooled PMSM motor used in electric vehicle

inferred← citeshttps://doi.org/10.1007/s12206-020-1240-yopenalex-snapshot

Cooling effect of oil cooling method on electric vehicle motors with hairpin winding

inferred← citeshttps://doi.org/10.1007/s12239-025-00244-6openalex-snapshot

Coupled Analysis and Metamodel-Based Optimal Design of Interior Permanent-Magnet Synchronous Motor Considering Multiphysical Characteristics

inferred← citeshttps://doi.org/10.1007/s13272-025-00868-5openalex-snapshot

Preliminary thermal management system design for cycle-integrated parallel hybrid compressors

inferred← citeshttps://doi.org/10.1007/s40962-025-01784-4openalex-snapshot

Enabling Technologies for Thermal Management During Permanent Mold Casting: A Critical Review

inferred← citeshttps://doi.org/10.1007/s40997-024-00755-0openalex-snapshot

Research Status and Development Trends of Thermal Management Technologies for Motors

inferred← citeshttps://doi.org/10.1007/s40998-025-00833-2openalex-snapshot

Evaluation and Simulation of Oil-based Direct Cooling System in Series DC Motors for Electric Vehicle Applications

inferred← citeshttps://doi.org/10.1007/s42154-025-00410-7openalex-snapshot

Review on Distributed Drive Electric Vehicle Configurations: Based on Graph Theory

inferred← citeshttps://doi.org/10.1007/s42835-021-00843-0openalex-snapshot

Cooling System Design Optimization of a High Power Density PM Traction Motor for Electric Vehicle Applications

inferred← citeshttps://doi.org/10.1007/s42835-024-02079-0openalex-snapshot

Cooling Enhancement of Axial Flux Permanent Magnet Motors by Corrugated Spiral Channels with Nanofluid

inferred← citeshttps://doi.org/10.1007/s42835-026-02724-wopenalex-snapshot

Design of a Novel Axial Flux Wound-Rotor Synchronous Motor for Electric Vehicles

inferred← citeshttps://doi.org/10.1007/s43236-024-00908-zopenalex-snapshot

Design and electromagnetic analysis of oil-cooled structure of new hairpin-winding motors for automobiles

inferred← citeshttps://doi.org/10.1016/b978-0-443-44447-0.00014-2openalex-snapshot

The role of phosphonate chemistry in engine coolant applications

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2021.117758openalex-snapshot

A critical review on thermal management technologies for motors in electric cars

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2022.119082openalex-snapshot

Enhancement of cooling performance in traction motor of electric vehicle using direct slot cooling method

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2022.119791openalex-snapshot

Thermal analysis of the oil cooling motor according to the churning phenomenon

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2023.120226openalex-snapshot

Comprehensive efficiency analysis of air-cooled vs water-cooled electric motor for unmanned aerial vehicle

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2023.121495openalex-snapshot

Analysis and design of air-heat pipe composite cooling of high power density motor

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2024.123234openalex-snapshot

Thermal management characteristics of electric vehicle driving motor with oil spray cooling based on spray locations and oil types

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2024.125006openalex-snapshot

Thermal analysis and thermal management of high power density electric motors for aircraft electrification

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2025.126414openalex-snapshot

Thermal management of hairpin winding traction motors in electric vehicles: Parametric evaluation of impinging oil jet cooling using CFD simulations

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2025.126554openalex-snapshot

Selecting cooling methods for electric motors

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2025.129091openalex-snapshot

A review of technical advances in rotor temperature estimation methods for traction motors: towards a multi-method classification framework

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2026.129729openalex-snapshot

Advance research of oil-water dual-jacket cooling system for PMSM motors used in heavy-duty trucks

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2026.130628openalex-snapshot

Direct liquid cooling performance of electrically heated coils: experimental evaluation and heat-balance analysis

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2026.131917openalex-snapshot

Numerical study of the cooling performance of a phase-change thermal management system for a 240 kW high-power automotive motor

inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2026.132085openalex-snapshot

Thermal management and loss optimization of axial flux machine for vacuum-operated flywheel energy storage

inferred← citeshttps://doi.org/10.1016/j.asej.2020.08.014openalex-snapshot

A review on methods of finding losses and cooling methods to increase efficiency of electric machines

inferred← citeshttps://doi.org/10.1016/j.asej.2024.103091openalex-snapshot

Advancements in axial flux permanent magnet machines utilizing coreless technology: A systematic review

inferred← citeshttps://doi.org/10.1016/j.csite.2022.102158openalex-snapshot

Electromagnetic-thermal coupling analysis of a permanent-magnet in-wheel motor with cooling channels in the deepened stator slots

inferred← citeshttps://doi.org/10.1016/j.csite.2023.103349openalex-snapshot

CFD Analysis of an Electric Motor's Cooling System: Model Validation and Solutions for Optimization

inferred← citeshttps://doi.org/10.1016/j.csite.2024.104400openalex-snapshot

Thermal analysis of 4-phase 8/6 SRM for EV application

inferred← citeshttps://doi.org/10.1016/j.csite.2024.104720openalex-snapshot

Reynolds number based optimization on liquid cooling system for permanent magnet synchronous motor of electric vehicle

inferred← citeshttps://doi.org/10.1016/j.csite.2024.104904openalex-snapshot

Heat dissipation design and performance optimization of high speed train PMSM based on coupled electromagnetic-thermal field

inferred← citeshttps://doi.org/10.1016/j.csite.2024.105259openalex-snapshot

Electromagnetic-thermal-mechanical performance of novel interior permanent magnet motor

inferred← citeshttps://doi.org/10.1016/j.csite.2025.105805openalex-snapshot

Design of an additively manufactured thermal solution for an axial flux switched reluctance motor

inferred← citeshttps://doi.org/10.1016/j.csite.2026.108327openalex-snapshot

Experimental and numerical investigation of cryogenic hydrogen cooling in hollow electrical conductors under compressible flow conditions

inferred← citeshttps://doi.org/10.1016/j.energy.2019.06.023openalex-snapshot

Numerical and experimental analysis of heat dissipation intensification from electric motor

inferred← citeshttps://doi.org/10.1016/j.est.2025.119719openalex-snapshot

Nanocoolant for electric vehicles: Overview, importance, limitations, and future directions

inferred← citeshttps://doi.org/10.1016/j.etran.2025.100396openalex-snapshot

Towards integrated thermal management systems in battery electric vehicles: A review

inferred← citeshttps://doi.org/10.1016/j.icheatmasstransfer.2026.111473openalex-snapshot

Targeted cooling of hot-spot temperature in traction motor: A novel WGRCR design and multi-objective integrated optimization framework

inferred← citeshttps://doi.org/10.1016/j.icheatmasstransfer.2026.112568openalex-snapshot

Heat pipes for thermal management of electric vehicle motors: A review

inferred← citeshttps://doi.org/10.1016/j.ifacol.2020.12.1046openalex-snapshot

An Internal Model Approach to Robust Current Control of IPMSM Drives with Respect to Unknown and Varying Inductances

inferred← citeshttps://doi.org/10.1016/j.ijepes.2025.110520openalex-snapshot

A comprehensive overview of high-speed solid-rotor induction machines: Applications, classification, and multi-physics modeling

inferred← citeshttps://doi.org/10.1016/j.ijheatmasstransfer.2021.121727openalex-snapshot

An experimental study of local heat transfer using high Prandtl number liquid jets

inferred← citeshttps://doi.org/10.1016/j.ijheatmasstransfer.2026.129068openalex-snapshot

Experimental study of local heat transfer with oil jet on rib-roughened surfaces

inferred← citeshttps://doi.org/10.1016/j.renene.2025.122716openalex-snapshot

Review and analysis of thermal management for proton exchange membrane fuel cell hybrid power system

inferred← citeshttps://doi.org/10.1016/j.rineng.2026.111073openalex-snapshot

Enhanced thermal management of PMSM by using integrated layer of silicon gelatin in housing cooling jacket

inferred← citeshttps://doi.org/10.1016/j.rser.2023.113874openalex-snapshot

Thermal management strategies and power ratings of electric vehicle motors

inferred← citeshttps://doi.org/10.1016/j.tsep.2026.104607openalex-snapshot

Thermal management of a compander using a lumped parameter thermal network model

inferred← citeshttps://doi.org/10.1038/s41598-023-36989-2openalex-snapshot

Thermal management analyses of induction motor through the combination of air-cooling and an integrated water-cooling system

inferred← citeshttps://doi.org/10.1049/elp2.12042openalex-snapshot

Numerical prediction and measurement of pressure drop and heat transfer in a water‐cooled hollow‐shaft rotor for a traction motor application

inferred← citeshttps://doi.org/10.1049/elp2.12432openalex-snapshot

Semi‐flooded cooling for high torque density modular permanent magnet machines

inferred← citeshttps://doi.org/10.1049/elp2.70135openalex-snapshot

Forced Air‐Cooling of Modular Flux Switching PM Machines Using Flux Gaps as Cooling Channels

inferred← citeshttps://doi.org/10.1049/iet-epa.2019.1020openalex-snapshot

Analytical thermal model and flow network analysis suitable for open self‐ventilated machines

inferred← citeshttps://doi.org/10.1049/iet-epa.2020.0237openalex-snapshot

Development of analytical thermal analysis tool for synchronous reluctance motors

inferred← citeshttps://doi.org/10.1051/epjconf/202534101019openalex-snapshot

Review of Traction Motors for Electric Vehicle Application

inferred← citeshttps://doi.org/10.1051/meca/2025016openalex-snapshot

Experimental analysis of the leakage characteristics of an oil cooled electric motor L-shaped lip seal in high-speed conditions

inferred← citeshttps://doi.org/10.1063/5.0226920openalex-snapshot

Thermal performance analysis and prediction of a circumferential serpentine tube for high-power motor cooling

inferred← citeshttps://doi.org/10.1080/00986445.2021.1976163openalex-snapshot

Synthesis, heat transfer properties and stability of nanofluids for commercialization: a review

inferred← citeshttps://doi.org/10.1080/01457632.2024.2337973openalex-snapshot

Accurate Time-Efficient Thermal Modeling and Discretization Methodology Applied to Electric Machines

inferred← citeshttps://doi.org/10.1088/1742-6596/1706/1/012105openalex-snapshot

Review of physical and mathematical modelling aspects of thermal management of induction motors

inferred← citeshttps://doi.org/10.1109/access.2020.2993235openalex-snapshot

Design Approaches and Control Strategies for Energy-Efficient Electric Machines for Electric Vehicles—A Review

inferred← citeshttps://doi.org/10.1109/access.2020.3040045openalex-snapshot

An Overview of Modern Thermo-Conductive Materials for Heat Extraction in Electrical Machines

inferred← citeshttps://doi.org/10.1109/access.2021.3062618openalex-snapshot

Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines

inferred← citeshttps://doi.org/10.1109/access.2021.3105119openalex-snapshot

A Stepwise Optimal Design Applied to an Interior Permanent Magnet Synchronous Motor for Electric Vehicle Traction Applications

inferred← citeshttps://doi.org/10.1109/access.2022.3215692openalex-snapshot

Review of High Power and High Voltage Electric Motors for Single-Aisle Regional Aircraft

inferred← citeshttps://doi.org/10.1109/access.2024.3398821openalex-snapshot

Sensitivity Analysis and Uncertainty Quantification of Thermal Behavior for Permanent Magnet Synchronous Machines

inferred← citeshttps://doi.org/10.1109/access.2024.3451705openalex-snapshot

Fault-Tolerant Dual Channels Three-Phase PMSM for Aerospace Applications

inferred← citeshttps://doi.org/10.1109/access.2026.3654831openalex-snapshot

New Oil-Flooded Direct Stator Cooling System for High Power Density Machines With Hairpin Windings

inferred← citeshttps://doi.org/10.1109/acemp-optim57845.2023.10287079openalex-snapshot

Simplified Lumped Parameter Thermal Modelling of Low Power Salient-Pole Synchronous Generators

inferred← citeshttps://doi.org/10.1109/aim64088.2025.11175792openalex-snapshot

Finite element modeling and experimental tests of electromagnetic and thermal behaviors of frameless torque motors for robotic joints

inferred← citeshttps://doi.org/10.1109/apet59977.2023.10489250openalex-snapshot

Design of Cooling Channel for Stator Immersion Oil Cooled Motor

inferred← citeshttps://doi.org/10.1109/aqtr55203.2022.9801983openalex-snapshot

Survey on Applying 3D Printing in Manufacturing the Cooling Systems of Electrical Machines

inferred← citeshttps://doi.org/10.1109/asemd49065.2020.9276336openalex-snapshot

A Cooling Enhanced Method for Axial Flux Permanent Magnet Synchronous Machine

inferred← citeshttps://doi.org/10.1109/atee52255.2021.9425122openalex-snapshot

Design and Comparison of Different Rotor Topologies at Liquid-Cooled Permanent Magnet Synchronous Machines for Electric Vehicles

inferred← citeshttps://doi.org/10.1109/aupec58309.2022.10215871openalex-snapshot

Design of a 100 kW Axial Flux Permanent Magnet Direct Drive Machine for a Hybrid Electric Vehicle

inferred← citeshttps://doi.org/10.1109/ccece.2019.8861611openalex-snapshot

A Survey of Different Cooling Methods for Traction Motor Application

inferred← citeshttps://doi.org/10.1109/cieec50170.2021.9510692openalex-snapshot

Starting Torque Improvement of a Permanent Magnet Starter Generator Based on Different Core Materials

inferred← citeshttps://doi.org/10.1109/cieec64805.2025.11116341openalex-snapshot

An Enhanced Endwinding Cooling Configuration Using Heat Pipes for An EVTOL Propulsion Motor

inferred← citeshttps://doi.org/10.1109/cieec64805.2025.11116547openalex-snapshot

Temperature Rise Calculation and Mixed Water Cooling Design of Hairpin Winding Motor for Electric Vehicles

inferred← citeshttps://doi.org/10.1109/cieec69682.2026.11572571openalex-snapshot

Self-Pumping Air-Cooling: A Novel Topology for Outer-Rotor UAV Generators under Windless Conditions

inferred← citeshttps://doi.org/10.1109/cpe-powereng50821.2021.9501210openalex-snapshot

Thermal Investigations of Air-Cooled PMSM used in Full-Electric UAV

inferred← citeshttps://doi.org/10.1109/ecce.2019.8912993openalex-snapshot

Direct Oil Cooling of End-Windings in Torus-Type Axial-Flux Permanent-Magnet Machines

inferred← citeshttps://doi.org/10.1109/ecce44975.2020.9235406openalex-snapshot

A Novel Toroidal Permanent Magnet Motor Structure with High Torque Density and Enhanced Cooling

inferred← citeshttps://doi.org/10.1109/ecce44975.2020.9235803openalex-snapshot

A Rotating Double Layer Capacitive Slip Ring Concept for Power & Heat Transfer in Machines using an Ionic Conducting Working Fluid

inferred← citeshttps://doi.org/10.1109/ecce44975.2020.9235871openalex-snapshot

Comparison of Two Hollow-Shaft Liquid Cooling Methods for High Speed Permanent Magnet Synchronous Machines

inferred← citeshttps://doi.org/10.1109/ecce44975.2020.9235894openalex-snapshot

Multi-Physics Analysis to Effectively Evaluate Thermal Performance of Liquid-Cooled Electric Machines

inferred← citeshttps://doi.org/10.1109/ecce44975.2020.9236293openalex-snapshot

Improved Cooling in Modular Consequent Pole PM Machine Utilizing Flux Gaps

inferred← citeshttps://doi.org/10.1109/ecce47101.2021.9595071openalex-snapshot

Model Calibration of Oil Jet and Oil Spray Cooling in Electrical Machines with Hairpin Windings

inferred← citeshttps://doi.org/10.1109/ecce47101.2021.9595429openalex-snapshot

Electromagnetic and Direct-cooling Analysis of a Traction Motor

inferred← citeshttps://doi.org/10.1109/ecce50734.2022.9947902openalex-snapshot

Sensorless Estimation for Stator Winding Temperature of Automotive Electric Motors Based on Sequential Current Pulse Injection

inferred← citeshttps://doi.org/10.1109/ecce53617.2023.10362464openalex-snapshot

Stator prototype for a high current density electric motor: Assembly, evaluation, and testing

inferred← citeshttps://doi.org/10.1109/ecce55643.2024.10860979openalex-snapshot

Synchronous Electrostatic Machines for Direct Drive Industrial Applications

inferred← citeshttps://doi.org/10.1109/ecce55643.2024.10861427openalex-snapshot

Comparative Analysis of Electric Motor Cooling: Water Ethylene Glycol Housing Jacket vs Direct Stator Oil

inferred← citeshttps://doi.org/10.1109/ecce58356.2025.11260209openalex-snapshot

Investigation of Multi-Tooth Dual-PM Machines Accounting for Different Cooling Strategies

inferred← citeshttps://doi.org/10.1109/edpc56367.2022.10019748openalex-snapshot

Effect of Higher-Strength Low-Loss Electrical Steel on the Electric Energy Saving of Traction Motors Considering Thermal Analysis

inferred← citeshttps://doi.org/10.1109/edpc60603.2023.10372147openalex-snapshot

Prototype fabrication of complex cooling channels by potting, additively manufactured inserts in an electric motor

inferred← citeshttps://doi.org/10.1109/edpe66853.2025.11224171openalex-snapshot

Influence of Cooling Liquid on the Electrical Reliability of Electric Machines with Direct Conductor Cooling

inferred← citeshttps://doi.org/10.1109/icar53236.2021.9659379openalex-snapshot

Design and Experimental Study of BLDC Motor Immersion Cooling for Legged Robots

inferred← citeshttps://doi.org/10.1109/iccc54292.2022.9805861openalex-snapshot

Improvement Trends in the Development of Permanent Magnet Synchronous Machines for Automotive Applications

inferred← citeshttps://doi.org/10.1109/icecet55527.2022.9872934openalex-snapshot

Overview of thermal loads distribution in traction electric machines and conditions for forced cooling of their parts

inferred← citeshttps://doi.org/10.1109/icelie58531.2023.10313104openalex-snapshot

Teaching Method for Electrical Machines Focusing on Differences Between Simulation and Experimental Verification

inferred← citeshttps://doi.org/10.1109/icelmach.2018.8506852openalex-snapshot

Pressure Loss Modelling in a Water-Cooled Hollow-Shaft Rotor for an Automotive Traction Motor

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9270717openalex-snapshot

Multi-Phase Winding with In-Conductor Direct Cooling Capability for a 48V Traction Drive Design

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9270753openalex-snapshot

Thermal Analysis of Salient Pole Synchronous Machines by Multiple Model Planes Approach

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9270820openalex-snapshot

Quality Assessment of a 2D FE Based Lumped Parameter Electric Motor Thermal Model Using 3D FE Models

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9270882openalex-snapshot

An Overview of PM Synchronous Machine Design Solutions for Enhanced Traction Performance

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9271015openalex-snapshot

Evaluation of Three Cooling Concepts for an Electric Vehicle Motor – Lumped Parameter Models

inferred← citeshttps://doi.org/10.1109/icem49940.2020.9271026openalex-snapshot

Investigation of Cooling Solutions for Hairpin Winding in Traction Application

inferred← citeshttps://doi.org/10.1109/icem51905.2022.9910686openalex-snapshot

Additively Manufactured Electric Machine Conductors with Integrated End Turn Heat Exchangers

inferred← citeshttps://doi.org/10.1109/icem51905.2022.9910733openalex-snapshot

Performance Assessment of Standard Cooling Strategies for Hairpin Windings

inferred← citeshttps://doi.org/10.1109/icem51905.2022.9910757openalex-snapshot

Experimental Separation of No-Load Losses of an Electric Motor with Direct Oil Cooling

inferred← citeshttps://doi.org/10.1109/icem51905.2022.9910911openalex-snapshot

Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications

inferred← citeshttps://doi.org/10.1109/icem60801.2024.10700126openalex-snapshot

Design of Integrated Radiator for Aviation Propulsion Motor Based on Structural Reuse

inferred← citeshttps://doi.org/10.1109/icem60801.2024.10700180openalex-snapshot

Numerical Analysis of the Local Heat Transfer Coefficient in a Rotating Hollow Rotor Shaft Liquid Cooling System for Electric Traction Motors

inferred← citeshttps://doi.org/10.1109/icem60801.2024.10700243openalex-snapshot

Empirical Study on Heat Transfer Coefficients in Lumped Parameter Thermal Network of Direct-Oil Cooled Permanent Magnet Synchronous Motor

inferred← citeshttps://doi.org/10.1109/icem60801.2024.10700282openalex-snapshot

Thermal Analysis of an Oil Jet Cooled Electric Motor with Hairpin Windings

inferred← citeshttps://doi.org/10.1109/icem60801.2024.10700585openalex-snapshot

A Feasibility Study of Oil Spray Cooling on the Stator Core Outer Surface of Electric Motors for Automotive Applications

inferred← citeshttps://doi.org/10.1109/icems.2019.8922016openalex-snapshot

Design and Optimization Analysis of Composite Water Cooling System Based On High Power Density Motor

inferred← citeshttps://doi.org/10.1109/icems.2019.8922026openalex-snapshot

Power Losses and Thermal Analysis of a Hollow-Shaft Rotor Cooling System

inferred← citeshttps://doi.org/10.1109/icems.2019.8922236openalex-snapshot

Multi-Physical Field Optimization Analysis of High-Speed Permanent Magnet Synchronous Motor Based on NSGA-II Algorithm

inferred← citeshttps://doi.org/10.1109/icems59686.2023.10344578openalex-snapshot

Design and Simulation Analysis of Oil Cooling System for Axial Flux Permanent Magnet Motors

inferred← citeshttps://doi.org/10.1109/icems59686.2023.10344997openalex-snapshot

Improvement Design of Outer-Rotor PMSM with Additive Manufactured Heat Exchanger

inferred← citeshttps://doi.org/10.1109/icems59686.2023.10345111openalex-snapshot

Effect of Cooling Strategies on Performance of Rotor PM and Stator PM Machines

inferred← citeshttps://doi.org/10.1109/iciea58696.2023.10241450openalex-snapshot

Temperature Analysis of the Surface-mounted Permanent Magnet Synchronous Motor

inferred← citeshttps://doi.org/10.1109/iecon.2019.8927706openalex-snapshot

Thermal Analysis of Totally Enclosed Fan Cooled Synchronous Reluctance Motor-state of art

inferred← citeshttps://doi.org/10.1109/iecon48115.2021.9589096openalex-snapshot

Multiobjectively optimized PMSynRM cooling for increased vehicle efficiency

inferred← citeshttps://doi.org/10.1109/iecon48115.2021.9589145openalex-snapshot

Multiphysic Design and Modeling of Rotating Electrical Machines

inferred← citeshttps://doi.org/10.1109/iecon48115.2021.9589672openalex-snapshot

Thermal Modelling of a Liquid Cooled Traction Machine with 8-layer Hairpin Windings

inferred← citeshttps://doi.org/10.1109/iemdc.2019.8785245openalex-snapshot

Optimized Sizing of IPM Machines for Automotive Traction Application

inferred← citeshttps://doi.org/10.1109/iemdc47953.2021.9449520openalex-snapshot

A Review of Thermal Analysis and Management of Power Dense Electric Machines

inferred← citeshttps://doi.org/10.1109/iemdc47953.2021.9449572openalex-snapshot

Development of an Experimental Methodology to Characterize Liquid Cooling Systems for Electric Motors

inferred← citeshttps://doi.org/10.1109/iemdc47953.2021.9449603openalex-snapshot

Evaluation of High Performance Rotor Cooling Techniques for Permanent Magnet Electric Motors

inferred← citeshttps://doi.org/10.1109/iemdc55163.2023.10238978openalex-snapshot

Thermal Modelling and Validation of a Direct Rotor Cooled Permanent Magnet Electric Machine

inferred← citeshttps://doi.org/10.1109/iemdc55163.2023.10239037openalex-snapshot

Improved Short Time Thermal Transient Model and Testing Procedure for High Power Density Motors

inferred← citeshttps://doi.org/10.1109/intermagshortpapers61879.2024.10577070openalex-snapshot

Magnetic and Thermal Modelling of Hollow Conductors for Improved Cooling and Force Density of Coreless Linear Motors

inferred← citeshttps://doi.org/10.1109/isie.2019.8781230openalex-snapshot

A Comprehensive Review of Thermal Design and Analysis of Traction Motors

inferred← citeshttps://doi.org/10.1109/isie45063.2020.9152243openalex-snapshot

Improving Performance and Extending Lifetime of PMSMs via Advanced End-Winding Cooling

inferred← citeshttps://doi.org/10.1109/ispacs62486.2024.10868733openalex-snapshot

A Study on Dynamic Adjustment of Radiator Fan in Automotive Cooling System Based on Fuzzy Algorithm

inferred← citeshttps://doi.org/10.1109/itec51675.2021.9490083openalex-snapshot

Design and Analysis of Stator Cooling Channels for an Axial-Flux Permanent Magnet Machine

inferred← citeshttps://doi.org/10.1109/itec51675.2021.9490129openalex-snapshot

Landscaping and Review of Traction Motors for Electric Vehicle Applications

inferred← citeshttps://doi.org/10.1109/itec60657.2024.10599010openalex-snapshot

Comparative Analysis of Motors with Inner and Outer Reluctance Rotors and PM Stators

inferred← citeshttps://doi.org/10.1109/itec63604.2025.11098079openalex-snapshot

A Comprehensive Sensitivity Analysis of Thermal Aspects for a Water-Cooled Traction Motor

inferred← citeshttps://doi.org/10.1109/itecasia-pacific56316.2022.9941772openalex-snapshot

Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines

inferred← citeshttps://doi.org/10.1109/itecasia-pacific63159.2024.10738540openalex-snapshot

Electromagnetic and Thermal Coupling and Cooling Optimization of Traction Motors in Electric Powertrains

inferred← citeshttps://doi.org/10.1109/itherm45881.2020.9190444openalex-snapshot

A Thermal Management Design Methodology for Advanced Power Electronics Utilizing Genetic Optimization and Additive Manufacturing Techniques

inferred← citeshttps://doi.org/10.1109/itherm54085.2022.9899655openalex-snapshot

Evaporative Cooling of High Power Density Motors: Design and Analysis

inferred← citeshttps://doi.org/10.1109/iwed.2019.8664220openalex-snapshot

A Survey on the Efficiency Improve of Electrical Machines

inferred← citeshttps://doi.org/10.1109/me54704.2022.9983280openalex-snapshot

Development of an Impingement Jet Cooling System Usable for Small Traction Electric Motor

inferred← citeshttps://doi.org/10.1109/naps56150.2022.10012265openalex-snapshot

Comparison of Axial and Radial Flux Permanent Magnet Machines

inferred← citeshttps://doi.org/10.1109/ojia.2025.3579971openalex-snapshot

Enhanced Short-Time Thermal Transient Model and Testing Procedure for High Power Density Motors, Such as in Supercar Traction

inferred← citeshttps://doi.org/10.1109/pemc48073.2021.9432558openalex-snapshot

Coupled Transient Thermal Analyses of Passive Cooling Traction PMSM from the Racing Formula

inferred← citeshttps://doi.org/10.1109/pq.2019.8818271openalex-snapshot

Review of the Analytical Flow Model to Predict the Hydraulic Behaviour in Electrical Machine

inferred← citeshttps://doi.org/10.1109/sdemped54949.2023.10271484openalex-snapshot

Experimental Investigation of High Viscosity on Oil Spray Cooling System with Hairpin Winding

inferred← citeshttps://doi.org/10.1109/smart63170.2024.10815330openalex-snapshot

Thermal Modelling and Characteristics of Permanent Magnet Synchronous Machines with Single and Dual Rotors Accounting for Different Cooling Methods

inferred← citeshttps://doi.org/10.1109/speedam48782.2020.9161871openalex-snapshot

Sizing approach of high torque density motors for aircraft application

inferred← citeshttps://doi.org/10.1109/speedam48782.2020.9161914openalex-snapshot

Fault-Tolerant Multi-Three-Phase PMSM Machine for Offroad Vehicle Hybridization

inferred← citeshttps://doi.org/10.1109/tasc.2021.3103728openalex-snapshot

A Rotor Cooling Enhanced Method for Axial Flux Permanent Magnet Synchronous Machine With Housing-Cooling

inferred← citeshttps://doi.org/10.1109/tasc.2024.3443017openalex-snapshot

Analytical Modeling of Temperature Field of SPMSM Based on Heat Pipe Cooling Technology

inferred← citeshttps://doi.org/10.1109/tasc.2024.3468073openalex-snapshot

Cooling Enhancement of an Axially Forced Air-Cooled Motors Using Axial Air Deflector

inferred← citeshttps://doi.org/10.1109/tase.2026.3735016openalex-snapshot

Temperature Observer for a Compact Multi-DOF Robotic Spherical Joint via Sensitivity-Aware LPTN and Kalman Filter

inferred← citeshttps://doi.org/10.1109/tec.2019.2952431openalex-snapshot

Investigation of a Direct Liquid Cooling System in a Permanent Magnet Synchronous Machine

inferred← citeshttps://doi.org/10.1109/tec.2020.2966606openalex-snapshot

Thermal and Manufacturing Aspects of Traction Motors Potting: A Deep Experimental Evaluation

inferred← citeshttps://doi.org/10.1109/tec.2020.2976625openalex-snapshot

Optimization of Axial-Flux Induction Motors for the Application of Electric Vehicles Considering Driving Cycles

inferred← citeshttps://doi.org/10.1109/tec.2020.3001053openalex-snapshot

Influence of Insulation Thermal Aging on the Temperature Assessment in Electrical Machines

inferred← citeshttps://doi.org/10.1109/tec.2022.3165431openalex-snapshot

Estimation of Two- and Three-dimensional Spatial Magnet Temperature Distributions for Interior PMSMs Based on Hybrid Analytical and Lumped-parameter Thermal Model

inferred← citeshttps://doi.org/10.1109/tec.2022.3179172openalex-snapshot

An Improved Dual Iterative Transient Thermal Network Model for PMSM With Natural Air Cooling

inferred← citeshttps://doi.org/10.1109/tec.2023.3249971openalex-snapshot

Heat Pipe Bending Effect on Cooling Effectiveness in Electrical Machines

inferred← citeshttps://doi.org/10.1109/tec.2023.3265676openalex-snapshot

Design and Analysis of a Rotor Air-Cooling Enhanced Method for Axial Flux Permanent Magnet Machine With Housing-Cooling

inferred← citeshttps://doi.org/10.1109/tec.2023.3339678openalex-snapshot

Improved Thermal Management and Analysis for High-Power Heat Pipe Cooled FSCW PMSM for HEV Auxiliary Power Unit Application

inferred← citeshttps://doi.org/10.1109/tec.2023.3347514openalex-snapshot

Design and Preliminary Optimization of a Heat Exchanger Formed by Additive Manufacturing for Outer-Rotor PMSM

inferred← citeshttps://doi.org/10.1109/tec.2024.3382491openalex-snapshot

New Ventilation Cooling for Modular PM Machines Utilizing Flux Gaps and Rotor Ducts

inferred← citeshttps://doi.org/10.1109/tec.2025.3615988openalex-snapshot

Design of Cooling Structure for Yokeless and Segmented Armature Axial Flux Permanent Magnet Machine Based on Computational Fluid Dynamics

inferred← citeshttps://doi.org/10.1109/tec.2025.3638861openalex-snapshot

Design Optimization of a Spoke-Type Permanent Magnet Motor for Torque Performance Improvement

inferred← citeshttps://doi.org/10.1109/therminic57263.2022.9950675openalex-snapshot

Experimental Investigation of a Novel Direct Rotor Cooling Method for an Interior Permanent Magnet Synchronous Machine

inferred← citeshttps://doi.org/10.1109/tia.2018.2860558openalex-snapshot

On the Measurement and Modeling of the Heat Transfer Coefficient of a Hollow-Shaft Rotary Cooling System for a Traction Motor

inferred← citeshttps://doi.org/10.1109/tia.2020.2997902openalex-snapshot

Cooling of Windings in Electric Machines via 3-D Printed Heat Exchanger

inferred← citeshttps://doi.org/10.1109/tia.2020.3025745openalex-snapshot

Thermal Analysis of an Oil-Cooled Shaft for a 30 000 r/min Automotive Traction Motor

inferred← citeshttps://doi.org/10.1109/tia.2021.3059811openalex-snapshot

Direct Oil Cooling of End-Windings in Torus-Type Axial-Flux Permanent-Magnet Machines

inferred← citeshttps://doi.org/10.1109/tia.2021.3077553openalex-snapshot

Numerically Based Reduced-Order Thermal Modeling of Traction Motors

inferred← citeshttps://doi.org/10.1109/tia.2022.3151309openalex-snapshot

Multiphysics Analysis to Effectively Evaluate Thermal Performance of Liquid-Cooled Electric Machines

inferred← citeshttps://doi.org/10.1109/tia.2022.3163662openalex-snapshot

Simplified 3-D Hybrid Analytical Modelling of Magnet Temperature Distribution for Surface-mounted PMSM With Segmented Magnets

inferred← citeshttps://doi.org/10.1109/tia.2022.3184666openalex-snapshot

Double Layer Capacitive Power and Heat Transfer in Rotating Machinery

inferred← citeshttps://doi.org/10.1109/tia.2023.3310977openalex-snapshot

Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines

inferred← citeshttps://doi.org/10.1109/tia.2023.3314004openalex-snapshot

Thermal Modeling With Surrogate Model-Based Optimization of Direct Oil Cooling Heat Transfer Coefficient for HEV Motor

inferred← citeshttps://doi.org/10.1109/tia.2024.3476433openalex-snapshot

Optimal Stator/Rotor Copper Loss Ratio for Maximum Torque of Electrically Excited Machines

inferred← citeshttps://doi.org/10.1109/tia.2025.3559026openalex-snapshot

Enhanced Ventilation and Thermal Performance by Inclined Through Holes on Rotor Yoke in Permanent Magnet Synchronous Wind Generators

inferred← citeshttps://doi.org/10.1109/tia.2025.3582566openalex-snapshot

Feasibility Analysis of Multiphase Machines for Electric Vehicle Applications

showing the first 200 of 328 · page through all 328

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.