On the public citation graph
Environmentally Efficient 316L Stainless Steel Feedstocks for Powder Injection Molding
0 signed · 54 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/pen.21928openalex-snapshot
Optimization of powder injection molding of feedstock based on aluminum oxide and multicomponent water‐soluble polymer binder
inferredcites →https://doi.org/10.1002/pen.24621openalex-snapshot
Effect of backbone binders on rheological performance of ceramic injection molding feedstocks
inferredcites →https://doi.org/10.1002/srin.201700047openalex-snapshot
Microstructural Evolution of 316L Austenitic Stainless Steel with 2%TiB2Addition during the HP‐HT Sintering
inferredcites →https://doi.org/10.1007/s11661-014-2549-xopenalex-snapshot
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
inferredcites →https://doi.org/10.1007/s12633-018-9843-yopenalex-snapshot
Evaluation of Wear Behaviour of Metal Injection Moulded Nickel Based Metal Matrix Composite
inferredcites →https://doi.org/10.1016/0377-0257(94)01282-mopenalex-snapshot
A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure
inferredcites →https://doi.org/10.1016/j.bsecv.2015.05.003openalex-snapshot
New processing route for ZrSiO4 by powder injection moulding using an eco-friendly binder system
inferredcites →https://doi.org/10.1016/j.ceramint.2014.11.082openalex-snapshot
Specific interactions of low molecular weight analogues of carnauba wax and polyethylene glycol binders of ceramic injection moulding feedstocks
inferredcites →https://doi.org/10.1016/j.ceramint.2015.08.132openalex-snapshot
Surface adhesion between ceramic injection molding feedstocks and processing tools
inferredcites →https://doi.org/10.1016/j.ceramint.2019.06.273openalex-snapshot
Evaluation of powder loading and flow properties of Al2O3 ceramic injection molding feedstocks treated with stearic acid
inferredcites →https://doi.org/10.1016/j.enbuild.2013.03.025openalex-snapshot
Preparation and characteristics of microencapsulated stearic acid as composite thermal energy storage material in buildings
inferredcites →https://doi.org/10.1016/j.jmatprotec.2006.08.004openalex-snapshot
A model for PEG removal from alumina injection moulded parts by solvent debinding
inferredcites →https://doi.org/10.1016/j.jmatprotec.2009.05.011openalex-snapshot
Effect of backbone polymer on properties of 316L stainless steel MIM compact
inferredcites →https://doi.org/10.1016/j.jmatprotec.2009.07.018openalex-snapshot
Influence of paraffin wax characteristics on the formulation of wax-based binders and their debinding from green molded parts using two comparative techniques
inferredcites →https://doi.org/10.1016/j.jmatprotec.2016.09.005openalex-snapshot
Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition
inferredcites →https://doi.org/10.1016/j.matdes.2016.01.041openalex-snapshot
Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
inferredcites →https://doi.org/10.1016/j.msea.2011.01.038openalex-snapshot
Powder injection moulding of premixed ferritic and austenitic stainless steel powders
inferredcites →https://doi.org/10.1016/j.powtec.2008.04.044openalex-snapshot
Development and property identification of 316L stainless steel feedstock for PIM and µPIM
inferredcites →https://doi.org/10.1016/j.powtec.2010.08.045openalex-snapshot
Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details
inferredcites →https://doi.org/10.1016/j.powtec.2015.07.046openalex-snapshot
The development of powder injection moulding binders: A quantification of individual components' interactions
inferredcites →https://doi.org/10.1016/j.solener.2016.03.004openalex-snapshot
Evaluation of copper nanoparticles – Paraffin wax compositions for solar thermal energy storage
inferredcites →https://doi.org/10.1016/j.wear.2009.06.019openalex-snapshot
Delamination wear of metal injection moulded 316L stainless steel
inferredcites →https://doi.org/10.1016/s0254-0584(02)00203-1openalex-snapshot
Effects of PEG molecular weights on rheological behavior of alumina injection molding feedstocks
inferredcites →https://doi.org/10.1122/1.549250openalex-snapshot
Discontinuous and Dilatant Viscosity Behavior in Concentrated Suspensions. I. Observation of a Flow Instability
inferredcites →https://doi.org/10.1155/2018/3954163openalex-snapshot
Shape Stability of Polyethylene Glycol/Acetylene Black Phase Change Composites for Latent Heat Storage
inferredcites →https://doi.org/10.1177/00220345710500025601openalex-snapshot
Thermogravimetric Analysis of Waxes
inferredcites →https://doi.org/10.1515/amm-2015-0146openalex-snapshot
De-Lubrication Behavior Of Novel EBS Based Admixed Lubricant In Aluminum P/M Alloy
inferredcites →https://doi.org/10.17576/jsm-2017-4602-13openalex-snapshot
Effects of Debinding and Sintering Atmosphere on Properties and Corrosion Resistance of Powder Injection Molded 316 L - Stainless Steel
inferredcites →https://doi.org/10.2355/isijinternational.43.119openalex-snapshot
Effects of Sintering Conditions on the Mechanical Properties of Metal Injection Molded 316L Stainless Steel.
inferredcites →https://doi.org/10.3390/ma11050807openalex-snapshot
Debinding and Sintering of an Injection-Moulded Hypereutectic Al–Si Alloy
inferredcites →https://doi.org/10.3390/ma12233867openalex-snapshot
Comparison between Mechanical Properties and Structures of a Rolled and a 3D-Printed Stainless Steel
inferredcites →https://doi.org/10.3390/ma8020499openalex-snapshot
Development of Composite PCMs by Incorporation of Paraffin into Various Building Materials
inferredcites →https://doi.org/10.3390/molecules19032748openalex-snapshot
Polyolefin Backbone Substitution in Binders for Low Temperature Powder Injection Moulding Feedstocks
inferredcites →https://doi.org/10.3390/polym10080816openalex-snapshot
Morphological and Tribological Properties of PMMA/Halloysite Nanocomposites
inferredcites →https://doi.org/10.5755/j01.ms.25.3.19137openalex-snapshot
Simulation on the Two-phase Separation of Powder Injection Molding 316L Stainless Steel
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4792100openalex-extracted
Recycling Waste Polymer as a Binder System for Ceramic Injection Molding Feedstock
inferred← citeshttps://doi.org/10.1007/s00170-026-18218-yopenalex-snapshot
Process-oriented analysis of rheological flow stability and injection moldability in highly filled AISI 316 L feedstocks with a natural rubber-based binder
inferred← citeshttps://doi.org/10.1007/s00170-026-18553-0openalex-snapshot
Sustainable binder systems in metal injection molding of 316 l stainless steel: A critical review and process-oriented perspective
inferred← citeshttps://doi.org/10.1007/s00170-026-19279-9openalex-snapshot
Final properties of aisi 316l stainless steel produced by metal injection molding using sustainable natural rubber-based binder systems
inferred← citeshttps://doi.org/10.1007/s11665-025-13100-6openalex-snapshot
Microstructure and Mechanical Properties of SS316L Fabricated via MIM Using Agar Binder System
inferred← citeshttps://doi.org/10.1007/s11665-026-13600-zopenalex-snapshot
Mechanical and Microstructural Characterization of SS316L/CNT Nanocomposites Fabricated via Extrusion-Based Additive Manufacturing
inferred← citeshttps://doi.org/10.1016/j.heliyon.2024.e39610openalex-snapshot
Recycling industrial waste polymer as a binder system for ceramic injection molding feedstock
inferred← citeshttps://doi.org/10.1016/j.matdes.2026.116648openalex-snapshot
Beyond viscosity curves: A critical rheological perspectives for converging material extrusion additive manufacturing and powder injection molding
inferred← citeshttps://doi.org/10.1016/j.powtec.2021.08.061openalex-snapshot
Characterization of nano / micro bimodal 316L SS powder obtained by electrical explosion of wire for feedstock application in powder injection molding
inferred← citeshttps://doi.org/10.1016/j.powtec.2025.121949openalex-snapshot
Parametric modeling of cradle-to-gate carbon emissions from gas-atomized AISI 316L powders under closed-loop feedstock strategies
inferred← citeshttps://doi.org/10.1088/2053-1591/ada5bbopenalex-snapshot
Enhancement of 316 L stainless steel mechanical properties through TiC particle introduction via metal powder injection molding
inferred← citeshttps://doi.org/10.1108/rpj-02-2023-0047openalex-snapshot
On the possibilities of merging additive manufacturing and powder injection molding in the production of metal parts
inferred← citeshttps://doi.org/10.1155/2024/4896959openalex-snapshot
Inner‐Side‐Protected Cladding with Meter Scale for High‐Temperature Oxidation Resistance via the Swaging–Drawing Process
inferred← citeshttps://doi.org/10.1177/00325899231212626openalex-snapshot
Effect of surface modification of metal powders (by aluminum stearate) on the properties of metal injection molding feedstock
inferred← citeshttps://doi.org/10.1177/09544089251358040openalex-snapshot
A novel approach towards the fabrication of SS316L–IN718 multi-metallic components using AM lattices and powder metallurgy
inferred← citeshttps://doi.org/10.21776/jrm.v14i1.1216openalex-snapshot
PENGGUNAAN MATERIAL 316L UNTUK GREEN-PART TEST PIECE DENGAN TEKNIK METAL INJECTION MOLDING
inferred← citeshttps://doi.org/10.24191/jmeche.v19i3.19798openalex-snapshot
Thermal and Flow Analysis of Stainless Steel and Alumina Feedstock Used for 2C-PIM Process
inferred← citeshttps://doi.org/10.3390/app15052584openalex-snapshot
Investigation of the Effect of Layer Thickness on the Mechanical Properties of 316L Austenitic Stainless Steel in Additive Manufacturing with Metal Filament
inferred← citeshttps://doi.org/10.3390/ma14185173openalex-snapshot
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.