On the public citation graph

Optimization of powder injection molding of feedstock based on aluminum oxide and multicomponent water‐soluble polymer binder

0 signed · 57 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/pc.750100406openalex-snapshot
Mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors
inferredcites →https://doi.org/10.1007/bf00368995openalex-snapshot
Rheological behaviour of a filled wax system
inferredcites →https://doi.org/10.1007/bf00453463openalex-snapshot
Flow instabilities in capillary flow of concentrated suspensions
inferredcites →https://doi.org/10.1007/bf01151118openalex-snapshot
Interaction between binder and powder in injection moulding of alumina
inferredcites →https://doi.org/10.1007/bf01333960openalex-snapshot
The yield stress myth?
inferredcites →https://doi.org/10.1007/bf01438803openalex-snapshot
Viscosity of suspensions modeled with a shear-dependent maximum packing fraction
inferredcites →https://doi.org/10.1016/0377-0257(94)01282-mopenalex-snapshot
A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure
inferredcites →https://doi.org/10.1016/j.jeurceramsoc.2007.08.004openalex-snapshot
Production of alumina parts by powder injection molding with a binder system based on high density polyethylene
inferredcites →https://doi.org/10.1016/j.jmatprotec.2006.08.004openalex-snapshot
A model for PEG removal from alumina injection moulded parts by solvent debinding
inferredcites →https://doi.org/10.1016/j.matdes.2005.05.023openalex-snapshot
The PVT effect on the final sintered dimensions of powder injection molded components
inferredcites →https://doi.org/10.1016/s0009-2509(01)00291-3openalex-snapshot
Modelling the flow behaviour of very shear-thinning liquids
inferredcites →https://doi.org/10.1016/s0272-8842(02)00226-2openalex-snapshot
Solvent debinding mechanism for alumina injection molded compacts with water-soluble binders
inferredcites →https://doi.org/10.1016/s0272-8842(97)00090-4openalex-snapshot
Binder removal from injection moulded zirconia ceramics
inferredcites →https://doi.org/10.1016/s0377-0257(98)00094-9openalex-snapshot
The yield stress—a review or ‘παντα ρει’—everything flows?
inferredcites →https://doi.org/10.1016/s0921-5093(00)00895-9openalex-snapshot
Influence of surfactant on rheological behaviors of injection–molded alumina suspensions
inferredcites →https://doi.org/10.1016/s0955-2219(96)00108-2openalex-snapshot
Thermal debinding of injection moulded ceramics
inferredcites →https://doi.org/10.1016/s0955-2219(99)00295-2openalex-snapshot
Effects of pressure parameters on alumina made by powder injection moulding
inferredcites →https://doi.org/10.1111/j.1151-2916.1995.tb08050.xopenalex-snapshot
Effects of Stearic Acid on the Injection Molding of Alumina
inferredcites →https://doi.org/10.1122/1.549250openalex-snapshot
Discontinuous and Dilatant Viscosity Behavior in Concentrated Suspensions. I. Observation of a Flow Instability
inferredcites →https://doi.org/10.1122/1.549808openalex-snapshot
Rheology of Suspensions in Polymeric Liquids
inferredcites →https://doi.org/10.1122/1.550442openalex-snapshot
The existence of static yield stresses in suspensions containing noncolloidal particles
inferredcites →https://doi.org/10.1122/1.550698openalex-snapshot
Rheological behavior of concentrated calcium halophosphate suspensions
inferredcites →https://doi.org/10.1515/arh-2002-0004openalex-snapshot
Temperature Dependent Flow Properties of Powder Injection Moulding Compounds
inferredcites →https://doi.org/10.1515/arh-2004-0004openalex-snapshot
Phenomenological Modelling of Non-Monotonous Shear Viscosity Functions
inferredcites →https://doi.org/10.1515/polyeng.2000.20.4.237openalex-snapshot
Rheological Behaviour of Hard-Metal Carbide Powder Suspensions at High Shear Rates
inferredcites →https://doi.org/10.3139/217.1556openalex-snapshot
Capillary Flow of Hard-Metal Carbide Powder Compounds
inferredcites →https://doi.org/10.3139/217.2243openalex-snapshot
Rheological and Thermal Properties of a Model System for PIM
inferredcites →https://doi.org/10.4011/shikizai1937.33.29openalex-snapshot
Rheology of disperse systems
inferredcites →https://doi.org/10.4271/982417openalex-snapshot
Injection Molding of Metals and Ceramics

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4792100openalex-extracted
Recycling Waste Polymer as a Binder System for Ceramic Injection Molding Feedstock
inferred← citeshttps://doi.org/10.1002/pen.24621openalex-snapshot
Effect of backbone binders on rheological performance of ceramic injection molding feedstocks
inferred← citeshttps://doi.org/10.1002/pen.25509openalex-snapshot
Extrusion of highly filled flexible polymer sheet
inferred← citeshttps://doi.org/10.1007/s00170-016-9889-1openalex-snapshot
Low-pressure powder injection molding using an innovative injection press concept
inferred← citeshttps://doi.org/10.1007/s10853-015-8853-zopenalex-snapshot
Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy
inferred← citeshttps://doi.org/10.1007/s11665-019-04276-9openalex-snapshot
Effect of Powder Shape and Size on Rheological, Thermal, and Segregation Properties of Low-Pressure Powder Injection Molding Feedstocks
inferred← citeshttps://doi.org/10.1016/b978-0-08-096527-7.00025-8openalex-snapshot
Advanced Manufacturing of Hard Ceramics
inferred← citeshttps://doi.org/10.1016/b978-0-12-819724-0.00030-6openalex-snapshot
Processability of High Metal and Ceramic Concentration Compounds
inferred← citeshttps://doi.org/10.1016/j.ceramint.2015.08.132openalex-snapshot
Surface adhesion between ceramic injection molding feedstocks and processing tools
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.06.273openalex-snapshot
Evaluation of powder loading and flow properties of Al2O3 ceramic injection molding feedstocks treated with stearic acid
inferred← citeshttps://doi.org/10.1016/j.powtec.2017.07.056openalex-snapshot
Influence of segregation on rheological properties of wax-based feedstocks
inferred← citeshttps://doi.org/10.1016/j.powtec.2018.02.043openalex-snapshot
Improving titanium injection moulding feedstock based on PEG/PPC based binder system
inferred← citeshttps://doi.org/10.1016/j.powtec.2021.10.039openalex-snapshot
Rheology of dry powders and metal injection molding feedstocks formulated on their base
inferred← citeshttps://doi.org/10.1016/j.powtec.2024.120472openalex-snapshot
Effect of powder size on the moldability and pore characteristics of porous tungsten by injection molding
inferred← citeshttps://doi.org/10.1080/10426914.2020.1734616openalex-snapshot
Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks
inferred← citeshttps://doi.org/10.1089/3dp.2021.0157openalex-snapshot
Effect of Particle Size and Shape on Wall Slip of Highly Filled Powder Feedstocks for Material Extrusion and Powder Injection Molding
inferred← citeshttps://doi.org/10.1108/rpj-09-2024-0402openalex-snapshot
Improved printability of diamond feedstock by designing of binder compositions for material extrusion additive manufacturing
inferred← citeshttps://doi.org/10.1111/jace.70819openalex-snapshot
Polymer‐Coated Ceramics Versus Admixed Ceramic‒Polymer Feedstocks for Injection Molding: Rheological and Thermal Analysis
inferred← citeshttps://doi.org/10.1520/mpc20190149openalex-snapshot
Threshold Concentration of Surfactant Agent in Feedstocks Used for Low-Pressure Powder Injection Molding
inferred← citeshttps://doi.org/10.21062/ujep/x.2016/a/1213-2489/mt/16/1/94openalex-snapshot
New Application of Powder Injection Molded Product in Medical Field
inferred← citeshttps://doi.org/10.30728/boron.1076544openalex-snapshot
Investigation of rheological and debinding properties of boron carbide feedstocks for powder injection molding
inferred← citeshttps://doi.org/10.3390/ma12081219openalex-snapshot
PVB/PEG-Based Feedstocks for Injection Molding of Alumina Microreactor Components
inferred← citeshttps://doi.org/10.3390/ma16010379openalex-snapshot
Research Progress on Low-Pressure Powder Injection Molding
inferred← citeshttps://doi.org/10.3390/molecules19032748openalex-snapshot
Polyolefin Backbone Substitution in Binders for Low Temperature Powder Injection Moulding Feedstocks
inferred← citeshttps://doi.org/10.3390/polym12061296openalex-snapshot
Environmentally Efficient 316L Stainless Steel Feedstocks for Powder Injection Molding
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.812.35openalex-snapshot
Quality Control Methods of Al2O3 Based Ceramic Injection Molding Raw Materials
inferred← citeshttps://doi.org/10.70675/b3d94c3cz98a2z44c3za944zf4e57636e6ebopenalex-snapshot
Modélisation et simulation numérique des étapes de déliantage et frittage du procédé de Moulage par Injection de poudres Métalliques (MIM)
inferred← citeshttps://doi.org/10.70675/d8b30e87z703ez4308z8879zcdabf0e30716openalex-snapshot
Dispersion de particules de zircone dans les polyoléfines : rhéologie et application au moulage par injection céramique
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.