On the public citation graph
Injection Molding of Metals and Ceramics
0 signed · 654 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4777650openalex-extracted
Dynamic Heating Rate Effect on Optimizing Sintered Density and Microstructure in Cocrfemnni High-Entropy Alloys Fabricated Through Metal Injection Molding
inferred← citeshttps://doi.org/10.2139/ssrn.4792100openalex-extracted
Recycling Waste Polymer as a Binder System for Ceramic Injection Molding Feedstock
inferred← citeshttps://doi.org/10.1002/0471238961.0305180105231921.a01.pub2openalex-snapshot
Ceramic Processing
inferred← citeshttps://doi.org/10.1002/14356007.a22_105.pub2openalex-snapshot
Powder Metallurgy and Sintered Materials
inferred← citeshttps://doi.org/10.1002/14356007.a24_185.pub2openalex-snapshot
Sintered Iron and Steel
inferred← citeshttps://doi.org/10.1002/9780470145333.ch17openalex-snapshot
Plastic Deformation of Powder Mixtures
inferred← citeshttps://doi.org/10.1002/9781118010570.ch11openalex-snapshot
Metal Injection Molding at Micro‐Scales (µMIM)
inferred← citeshttps://doi.org/10.1002/9781118097298.weoc193openalex-snapshot
Powder Injection Molding
inferred← citeshttps://doi.org/10.1002/9781118097298.weoc194openalex-snapshot
Particulate Composites by Powder Injection Molding
inferred← citeshttps://doi.org/10.1002/9781118370940.ch1openalex-snapshot
Particle Size Distribution as a Predictor of Suspension Flow Behavior
inferred← citeshttps://doi.org/10.1002/9781118408995.ch5openalex-snapshot
Nanoparticle‐Based Material Shaping
inferred← citeshttps://doi.org/10.1002/9781118792148.ch293openalex-snapshot
Rheological Properties of Feedstock Composed of Titanium Alloy Powder and Polyethylene Glycol Based Binder System for Metal Injection Moulding
inferred← citeshttps://doi.org/10.1002/9781119908142.ch12openalex-snapshot
Microstructure Evolution and Powder Effects
inferred← citeshttps://doi.org/10.1002/9783527839353.ch14openalex-snapshot
Material Extrusion Additive Manufacturing
inferred← citeshttps://doi.org/10.1002/adem.200900168openalex-snapshot
Powder Metallurgical Near‐Net‐Shape Fabrication of Porous NiTi Shape Memory Alloys for Use as Long‐Term Implants by the Combination of the Metal Injection Molding Process with the Space‐Holder Technique
inferred← citeshttps://doi.org/10.1002/adem.201200289openalex-snapshot
Realization of a Titanium Spinal Implant with a Gradient in Porosity by 2‐Component‐Metal Injection Moulding
inferred← citeshttps://doi.org/10.1002/adma.201506089openalex-snapshot
Liquid Glass: A Facile Soft Replication Method for Structuring Glass
inferred← citeshttps://doi.org/10.1002/app.33961openalex-snapshot
Processing, tensile, and fracture properties of injection molded Hdpe‐Al2O3‐HAp hybrid composites
inferred← citeshttps://doi.org/10.1002/bit.24794openalex-snapshot
A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration
inferred← citeshttps://doi.org/10.1002/fld.2741openalex-snapshot
A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding
inferred← citeshttps://doi.org/10.1002/pen.21928openalex-snapshot
Optimization of powder injection molding of feedstock based on aluminum oxide and multicomponent water‐soluble polymer binder
inferred← citeshttps://doi.org/10.1007/978-1-56990-654-5_12openalex-snapshot
Micro Powder Injection Molding
inferred← citeshttps://doi.org/10.1007/978-3-030-93712-6_21openalex-snapshot
Metal Injection Molding (MIM) Process and Potential Remedies for Its Defects: A Review
inferred← citeshttps://doi.org/10.1007/978-3-031-67047-3_3openalex-snapshot
Processing of Silicon Nitride Bioceramics
inferred← citeshttps://doi.org/10.1007/978-3-319-18956-7_4openalex-snapshot
Powder Characterization and Compaction
inferred← citeshttps://doi.org/10.1007/978-3-319-48764-9_293openalex-snapshot
Rheological Properties of Feedstock Composed of Titanium Alloy Powder and Polyethylene Glycol Based Binder System for Metal Injection Moulding
inferred← citeshttps://doi.org/10.1007/978-3-662-46842-5_2openalex-snapshot
Metal Injection Molding (MIM) Processing
inferred← citeshttps://doi.org/10.1007/978-981-10-3017-8_6openalex-snapshot
Processing, Tensile and Fracture Properties of Injection Molded HDPE–Al2O3–HAp Hybrid Composites
inferred← citeshttps://doi.org/10.1007/978-981-10-4819-7_3openalex-snapshot
Analysis of Nano/Micro Bimodal SUS316L Powder Behavior
inferred← citeshttps://doi.org/10.1007/978-981-10-4819-7_34openalex-snapshot
Characterization of Fine Metal Powders Produced by Hybrid by Water–Gas Atomization for Metal Injection Molding
inferred← citeshttps://doi.org/10.1007/978-981-16-2347-9_21openalex-snapshot
Thermal and Rheological Behaviour of a Wax Based Binder and an Alumina Feedstock for Micro-PIM Application
inferred← citeshttps://doi.org/10.1007/978-981-16-4115-2_23openalex-snapshot
Fabrication of Titanium-Matrix Composite with 40 wt% Hydroxyapatite by Powder Injection Molding
inferred← citeshttps://doi.org/10.1007/s00170-006-0666-4openalex-snapshot
Manufacturing of multi-functional micro parts by two-component metal injection moulding
inferred← citeshttps://doi.org/10.1007/s00170-016-9256-2openalex-snapshot
The effect of sintering parameters on diffusion bonding of 316L stainless steel in inserted metal injection molding
inferred← citeshttps://doi.org/10.1007/s00170-018-2263-8openalex-snapshot
Investigation and modeling of binder removal process in nano/micro bimodal powder injection molding
inferred← citeshttps://doi.org/10.1007/s00170-018-2986-6openalex-snapshot
Fabrication of micro piezoelectric rod array using metallic mold system for mass production
inferred← citeshttps://doi.org/10.1007/s00170-019-04368-9openalex-snapshot
The effect of PSD on properties of unimodal and bimodal powders using 17-4 PH stainless steel powder
inferred← citeshttps://doi.org/10.1007/s00170-021-07043-0openalex-snapshot
Optimization of metallic powder filaments for additive manufacturing extrusion (MEX)
inferred← citeshttps://doi.org/10.1007/s00170-026-18218-yopenalex-snapshot
Process-oriented analysis of rheological flow stability and injection moldability in highly filled AISI 316 L feedstocks with a natural rubber-based binder
inferred← citeshttps://doi.org/10.1007/s00542-004-0492-2openalex-snapshot
Injection molding of 3D microstructures by μPIM
inferred← citeshttps://doi.org/10.1007/s00542-007-0401-6openalex-snapshot
Fabrication of micro gear by micro powder injection molding
inferred← citeshttps://doi.org/10.1007/s00542-008-0673-5openalex-snapshot
Micro injection molding of micro gear using nano-sized zirconia powder
inferred← citeshttps://doi.org/10.1007/s00542-012-1631-9openalex-snapshot
Effect of nano-sized powders on powder injection molding: a review
inferred← citeshttps://doi.org/10.1007/s00542-014-2272-yopenalex-snapshot
Fabrication of miniature parts using nano-sized powders and an environmentally friendly binder through micro powder injection molding
inferred← citeshttps://doi.org/10.1007/s00542-017-3533-3openalex-snapshot
Numerical simulation and experimental analysis of the sintered micro-parts using the powder injection molding process
inferred← citeshttps://doi.org/10.1007/s10704-012-9722-2openalex-snapshot
Interaction of plastic zone, pores, and stress ratio with fatigue crack growth of sintered stainless steel
inferred← citeshttps://doi.org/10.1007/s10853-005-0432-2openalex-snapshot
Microstructures and mechanical properties of injection molded 17-4PH stainless steel powder with nickel boride additions
inferred← citeshttps://doi.org/10.1007/s10853-005-0777-6openalex-snapshot
Sintering of a boron-doped injection moulded 17-4PH stanless steel
inferred← citeshttps://doi.org/10.1007/s10853-012-6627-4openalex-snapshot
Influence of visco-elastic binder properties on ram extrusion of a hardmetal paste
inferred← citeshttps://doi.org/10.1007/s10853-014-8532-5openalex-snapshot
Degradation behavior of novel Fe/ß-TCP composites produced by powder injection molding for cortical bone replacement
inferred← citeshttps://doi.org/10.1007/s10973-017-6808-0openalex-snapshot
Assessment of Ti–16Nb–xZr alloys produced via PIM for implant applications
inferred← citeshttps://doi.org/10.1007/s11106-020-00134-9openalex-snapshot
Optimization of the Sintering Parameters for Materials Manufactured by Powder Injection Molding
inferred← citeshttps://doi.org/10.1007/s11148-020-00410-6openalex-snapshot
High-Density Micro- and Nano-Grain Size Ceramics. Transition from Open into Closed Pores. Part 2. Binder Removal from a Workpiece1
inferred← citeshttps://doi.org/10.1007/s11581-011-0572-0openalex-snapshot
Fabrication of porous Ni–YSZ anodes by PSH-PIM
inferred← citeshttps://doi.org/10.1007/s11661-000-0265-1openalex-snapshot
Length change and deformation of powder injection-molded compacts during solvent debinding
inferred← citeshttps://doi.org/10.1007/s11661-002-0050-4openalex-snapshot
Sintering densification and microstructural evolution of injection molding grade 17-4 PH stainless steel powder
inferred← citeshttps://doi.org/10.1007/s11661-002-0192-4openalex-snapshot
Effect of residual carbon on the sintering process of M2 high speed steel parts obtained by a modified metal injection molding process
inferred← citeshttps://doi.org/10.1007/s11661-004-0126-4openalex-snapshot
Simulation of the sintering densification and shrinkage behavior of powder-injection-molded 17-4 PH stainless steel
inferred← citeshttps://doi.org/10.1007/s11661-005-0148-6openalex-snapshot
Solvent debinding behavior of powder injection molded components prepared from powders with different particle sizes
inferred← citeshttps://doi.org/10.1007/s11661-008-9760-6openalex-snapshot
Minimum Amount of Binder Removal Required during Solvent Debinding of Powder-Injection-Molded Compacts
inferred← citeshttps://doi.org/10.1007/s11661-009-0012-1openalex-snapshot
Powder Injection Molding of Al-(Steel and Magnet) Hybrid Components
inferred← citeshttps://doi.org/10.1007/s11661-012-1477-xopenalex-snapshot
Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder
inferred← citeshttps://doi.org/10.1007/s11661-012-1485-xopenalex-snapshot
Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview
inferred← citeshttps://doi.org/10.1007/s11661-014-2391-1openalex-snapshot
High-Temperature Oxidation Behavior of Two Nickel-Based Superalloys Produced by Metal Injection Molding for Aero Engine Applications
inferred← citeshttps://doi.org/10.1007/s11661-018-4851-5openalex-snapshot
Nanopowder Effect on Fe Nano/Micro-Bimodal Powder Injection Molding
inferred← citeshttps://doi.org/10.1007/s11661-020-06087-3openalex-snapshot
Secondary Recrystallization of Nickel-Base Superalloy CM 247 LC After Processing by Metal Injection Molding
inferred← citeshttps://doi.org/10.1007/s11665-019-04276-9openalex-snapshot
Effect of Powder Shape and Size on Rheological, Thermal, and Segregation Properties of Low-Pressure Powder Injection Molding Feedstocks
inferred← citeshttps://doi.org/10.1007/s11771-005-0142-6openalex-snapshot
Sintering products molded by injecting ceramic and metal powders
inferred← citeshttps://doi.org/10.1007/s11771-008-0313-3openalex-snapshot
Comparison of rheological analytic model with numerical simulation in powder injection molding filling process
inferred← citeshttps://doi.org/10.1007/s11837-000-0066-4openalex-snapshot
The extrusion freeforming of functional ceramic prototypes
inferred← citeshttps://doi.org/10.1007/s11837-010-0075-xopenalex-snapshot
Advanced gas atomization processing for Ti and Ti alloy powder manufacturing
inferred← citeshttps://doi.org/10.1007/s11837-018-2786-3openalex-snapshot
Experimental and Numerical Analysis of Injection Molding of Ti-6Al-4V Powders for High-Performance Titanium Parts
inferred← citeshttps://doi.org/10.1007/s11837-019-03431-wopenalex-snapshot
Conceptual Design Framework for Setting Up Aluminum Alloy Powder Production System for Selective Laser Melting (SLM) Process
inferred← citeshttps://doi.org/10.1007/s11837-019-03920-yopenalex-snapshot
Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF3)
inferred← citeshttps://doi.org/10.1007/s11837-020-04260-yopenalex-snapshot
Solid-State Metal Additive Manufacturing: A Review
inferred← citeshttps://doi.org/10.1007/s11837-021-05050-wopenalex-snapshot
A Method for Predicting Powder Flowability for Selective Laser Sintering
inferred← citeshttps://doi.org/10.1007/s12046-013-0135-3openalex-snapshot
A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM)
inferred← citeshttps://doi.org/10.1007/s12206-016-0343-yopenalex-snapshot
Preparation of Ti-6Al-4V feedstock for titanium powder injection molding
inferred← citeshttps://doi.org/10.1007/s12206-024-0331-6openalex-snapshot
Development of a manufacturing process for fine ceramic components using the composite of silica slurry: an evaluation of its mechanical durability
inferred← citeshttps://doi.org/10.1007/s12289-008-0055-7openalex-snapshot
Experiments and identification in micro powder injection moulding from stainless steel powder 5μm size
inferred← citeshttps://doi.org/10.1007/s12289-009-0652-0openalex-snapshot
Mixing and Characterisation of stainless steel 316L feedstock
inferred← citeshttps://doi.org/10.1007/s12289-021-01612-0openalex-snapshot
Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding
inferred← citeshttps://doi.org/10.1007/s12540-017-7301-9openalex-snapshot
Thermal decomposition behavior of nano/micro bimodal feedstock with different solids loading
inferred← citeshttps://doi.org/10.1007/s12540-019-00442-9openalex-snapshot
Rheological and Thermal Characterization of AISI 4605 Low-Alloy Steel Feedstock for Metal Injection Molding Process
inferred← citeshttps://doi.org/10.1007/s12540-019-00455-4openalex-snapshot
Study on Rheological Behavior and Mechanical Properties of PMN–PZT Ceramic Feedstock
inferred← citeshttps://doi.org/10.1007/s12540-019-00492-zopenalex-snapshot
Warpage of Powder Injection Molded Copper Structure
inferred← citeshttps://doi.org/10.1007/s12540-020-00767-wopenalex-snapshot
Process Parameters Used in Macro/Micro Powder Injection Molding: An Overview
inferred← citeshttps://doi.org/10.1007/s12540-023-01441-7openalex-snapshot
Rheological Behavior of Water-Atomized 316L Stainless Steel Powder Depending on Particle Size
inferred← citeshttps://doi.org/10.1007/s12541-009-0066-4openalex-snapshot
A study of WC end-milling manufacturing and cutting ability evaluation by using powder injection molding
inferred← citeshttps://doi.org/10.1007/s12541-016-0043-7openalex-snapshot
Development of magnetic/non-magnetic stainless steel parts produced by two-component metal injection molding
inferred← citeshttps://doi.org/10.1007/s12598-011-0430-2openalex-snapshot
Injection molding of micro‐porous titanium alloy with space holder technique
inferred← citeshttps://doi.org/10.1007/s12613-025-3263-yopenalex-snapshot
Rheological behavior and injectability of PEG/glycerol/bioactive glass-based bone grafts incorporating Denosumab
inferred← citeshttps://doi.org/10.1007/s13367-011-0016-4openalex-snapshot
Effects of process parameters in plastic, metal, and ceramic injection molding processes
inferred← citeshttps://doi.org/10.1007/s13726-014-0268-1openalex-snapshot
Torque rheometry and rheological analysis of powder–polymer mixture for aluminum powder injection molding
inferred← citeshttps://doi.org/10.1007/s40033-018-0166-3openalex-snapshot
Analysis and Optimization of Metal Injection Molding Feedstock SS 316L for Rheological Properties
inferred← citeshttps://doi.org/10.1007/s40436-019-00253-6openalex-snapshot
A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts
inferred← citeshttps://doi.org/10.1007/s40544-024-0885-4openalex-snapshot
Using fused filament fabrication to improve the tribocorrosion behaviour of 17-4 PH SS in comparison to other metal forming techniques
inferred← citeshttps://doi.org/10.1007/s40964-021-00167-5openalex-snapshot
Additive manufacturing of Ti-6Al-4V alloy by metal fused filament fabrication (MF3): producing parts comparable to that of metal injection molding
inferred← citeshttps://doi.org/10.1007/s42452-020-03791-yopenalex-snapshot
Optimization and characterization of novel injection molding process for metal matrix syntactic foams
inferred← citeshttps://doi.org/10.1007/s43207-025-00481-6openalex-snapshot
A multistage de-binding approach for material extrusion-based additively manufactured fabricated zirconia ceramics
inferred← citeshttps://doi.org/10.1016/b0-08-043152-6/00949-9openalex-snapshot
Metal Injection Molding
inferred← citeshttps://doi.org/10.1016/b978-0-08-096527-7.00025-8openalex-snapshot
Advanced Manufacturing of Hard Ceramics
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00004-0openalex-snapshot
Powders for metal injection molding (MIM)
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00008-8openalex-snapshot
Molding of components in metal injection molding (MIM)
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00009-xopenalex-snapshot
Debinding and sintering of metal injection molding (MIM) components
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00016-7openalex-snapshot
Control of carbon content in metal injection molding
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00017-9openalex-snapshot
Micro metal injection molding (MicroMIM)
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00020-9openalex-snapshot
Powder space holder metal injection molding (PSH-MIM) of microporous metals
inferred← citeshttps://doi.org/10.1016/b978-0-08-102152-1.00027-1openalex-snapshot
Metal injection molding (MIM) of heavy alloys, refractory metals, and hardmetals
inferred← citeshttps://doi.org/10.1016/b978-0-12-800054-0.00020-4openalex-snapshot
Powder-processing linkages to properties for complex titanium shapes by injection molding
inferred← citeshttps://doi.org/10.1016/b978-0-12-803581-8.03574-8openalex-snapshot
Ceramic Injection Molding
inferred← citeshttps://doi.org/10.1016/b978-0-12-819724-0.00030-6openalex-snapshot
Processability of High Metal and Ceramic Concentration Compounds
inferred← citeshttps://doi.org/10.1016/b978-0-12-819726-4.00015-6openalex-snapshot
Powder Injection Molding of Metallic Parts and Structures
inferred← citeshttps://doi.org/10.1016/b978-0-12-819726-4.00153-8openalex-snapshot
Powder Pressing, Shaping and 3D-Printing of Titanium Parts From Titanium Hydride Powder
inferred← citeshttps://doi.org/10.1016/j.addma.2020.101207openalex-snapshot
Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102114openalex-snapshot
The effects of sintering temperature and hold time on densification, mechanical properties and microstructural characteristics of binder jet 3D printed 17-4 PH stainless steel
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102227openalex-snapshot
Material extrusion based additive manufacturing of large zirconia structures using filaments with ethylene vinyl acetate based binder composition
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102375openalex-snapshot
Bi-metal composite material for plastic injection molding tooling applications via fused filament fabrication process
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102408openalex-snapshot
Water-soluble sacrificial 3D printed molds for fast prototyping in ceramic injection molding
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102448openalex-snapshot
Reactive binder jet additive manufacturing for microstructural control and dimensional stability of ceramic materials
inferred← citeshttps://doi.org/10.1016/j.addma.2022.103335openalex-snapshot
Overview of debinding methods for parts manufactured using powder material extrusion
inferred← citeshttps://doi.org/10.1016/j.addma.2024.104185openalex-snapshot
Slurry-based photoinitiator jetting process for ceramic additive manufacturing
inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2015.11.114openalex-snapshot
Experimental and calculated data of the beryllium oxide slurry solidification
inferred← citeshttps://doi.org/10.1016/j.bsecv.2015.05.003openalex-snapshot
New processing route for ZrSiO4 by powder injection moulding using an eco-friendly binder system
inferred← citeshttps://doi.org/10.1016/j.ceramint.2005.03.006openalex-snapshot
PIM of non-conventional particles
inferred← citeshttps://doi.org/10.1016/j.ceramint.2012.09.033openalex-snapshot
Yttria stabilized zirconia formed by micro ceramic injection molding: Rheological properties and debinding effects on the sintered part
inferred← citeshttps://doi.org/10.1016/j.ceramint.2013.05.134openalex-snapshot
Fabrication of zirconia-toughened alumina parts by powder injection molding process: Optimized processing parameters
inferred← citeshttps://doi.org/10.1016/j.ceramint.2013.10.032openalex-snapshot
Binder removal via a two-stage debinding process for ceramic injection molding parts
inferred← citeshttps://doi.org/10.1016/j.ceramint.2014.05.104openalex-snapshot
The effects of nanoparticle addition on binder removal from injection molded silicon carbide
inferred← citeshttps://doi.org/10.1016/j.ceramint.2014.11.022openalex-snapshot
Micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties
inferred← citeshttps://doi.org/10.1016/j.ceramint.2014.11.082openalex-snapshot
Specific interactions of low molecular weight analogues of carnauba wax and polyethylene glycol binders of ceramic injection moulding feedstocks
inferred← citeshttps://doi.org/10.1016/j.ceramint.2014.12.075openalex-snapshot
Fabrication of glass components by sintering of commercial glass powder
inferred← citeshttps://doi.org/10.1016/j.ceramint.2016.07.224openalex-snapshot
Mold filling simulation of low pressure injection molding (LPIM) of alumina: Effect of temperature and pressure
inferred← citeshttps://doi.org/10.1016/j.ceramint.2016.11.208openalex-snapshot
Influence of injection temperature and pressure on the properties of alumina parts fabricated by low pressure injection molding (LPIM)
inferred← citeshttps://doi.org/10.1016/j.ceramint.2017.11.093openalex-snapshot
Effects of the binder compositions on the homogeneity of ceramic injection molded compacts
inferred← citeshttps://doi.org/10.1016/j.ceramint.2018.12.129openalex-snapshot
Fabrication of pressureless sintered Si3N4 ceramic balls by powder injection molding
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.01.038openalex-snapshot
Master flow curves as a tool to modelling ceramic injection molding
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.03.038openalex-snapshot
Effect of sintering on the microstructure and mechanical properties of alloy titanium-wollastonite composite fabricated by powder injection moulding process
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.05.247openalex-snapshot
Rheological and thermal debinding behaviors of silicon nitride in powder injection molding
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.06.273openalex-snapshot
Evaluation of powder loading and flow properties of Al2O3 ceramic injection molding feedstocks treated with stearic acid
inferred← citeshttps://doi.org/10.1016/j.ceramint.2019.12.190openalex-snapshot
Ceramic Injection Moulding of engineered glass-ceramics: Boosting the rare-earth free photoluminescence
inferred← citeshttps://doi.org/10.1016/j.ceramint.2020.01.243openalex-snapshot
Design, fabrication of honeycomb-shaped 1–3 connectivity piezoelectric micropillar arrays for 2D ultrasound transducer application
inferred← citeshttps://doi.org/10.1016/j.ceramint.2022.05.230openalex-snapshot
Synergy of low-and high-density polyethylene in a binder system for powder injection molding of SiC ceramics
inferred← citeshttps://doi.org/10.1016/j.cherd.2013.02.023openalex-snapshot
Influence of powder characteristics on the behaviour of PIM feedstock
inferred← citeshttps://doi.org/10.1016/j.cirp.2014.05.011openalex-snapshot
Industrial applications of computed tomography
inferred← citeshttps://doi.org/10.1016/j.cirp.2018.04.104openalex-snapshot
Additive manufacturing of metal components with the ARBURG plastic freeforming process
inferred← citeshttps://doi.org/10.1016/j.commatsci.2014.11.011openalex-snapshot
Magneto-rheological model for computational analysis of magnetic micro powder injection molding
inferred← citeshttps://doi.org/10.1016/j.compositesa.2021.106357openalex-snapshot
A review of graphene reinforced Cu matrix composites for thermal management of smart electronics
inferred← citeshttps://doi.org/10.1016/j.compositesb.2023.110915openalex-snapshot
Filament fabrication and subsequent additive manufacturing, debinding, and sintering for extrusion-based metal additive manufacturing and their applications: A review
inferred← citeshttps://doi.org/10.1016/j.engfailanal.2026.111364openalex-snapshot
Microstructure-driven damage mechanics and failure of FFF-sintered 316L and 17-4PH steels
inferred← citeshttps://doi.org/10.1016/j.finel.2009.06.020openalex-snapshot
Sensitivity analysis by the adjoint variable method for optimization of the die compaction process in particulate materials processing
inferred← citeshttps://doi.org/10.1016/j.heliyon.2024.e39610openalex-snapshot
Recycling industrial waste polymer as a binder system for ceramic injection molding feedstock
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2005.06.003openalex-snapshot
Development of niobium powder injection molding: Part I. Feedstock and injection molding
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2006.05.005openalex-snapshot
Development of niobium powder injection molding. Part II: Debinding and sintering
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2012.07.003openalex-snapshot
The effects of nanoparticle addition on binder removal from injection molded aluminum nitride
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2013.09.007openalex-snapshot
Development of non-eroding rocket nozzle throat for ultra-high temperature environment
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2013.09.011openalex-snapshot
Fabrication of 93W–Ni–Fe alloy large-diameter rods by powder extrusion molding
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2014.09.022openalex-snapshot
Effects of process parameters on quality of ultrafine WC/12Co injection molded compacts
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2014.12.007openalex-snapshot
Rheological characterization and finite element modeling of an extrusion process of a WC–Co compound
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2016.10.015openalex-snapshot
Injection molding of tungsten powder treated by jet mill with high powder loading: A solution for fabrication of dense tungsten component at relative low temperature
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2018.01.019openalex-snapshot
Traditional and additive manufacturing of a new Tungsten heavy alloy alternative
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2018.05.020openalex-snapshot
Binderless tungsten carbide carbon control with pressureless sintering
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2019.03.015openalex-snapshot
Fabrication and properties of Si3N4 based ceramics using combustion synthesized powders
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2020.105249openalex-snapshot
Printability studies of Ti-6Al-4V by metal fused filament fabrication (MF3)
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2021.105553openalex-snapshot
Molding process of WC-Co%9 feedstock with HSS insert in inserted powder injection molding
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2022.106021openalex-snapshot
Processing of tungsten heavy alloy by extrusion-based additive manufacturing
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2023.106493openalex-snapshot
Sinter-based additive manufacturing of hardmetals: Review
inferred← citeshttps://doi.org/10.1016/j.jallcom.2010.01.147openalex-snapshot
Replication and characterization of 316L stainless steel micro-mixer by micro powder injection molding
inferred← citeshttps://doi.org/10.1016/j.jallcom.2011.01.167openalex-snapshot
Optimization of processing conditions and characterization investigations of ceramic injection molded and sintered ZrO2/WC composites
inferred← citeshttps://doi.org/10.1016/j.jallcom.2015.04.039openalex-snapshot
Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial
inferred← citeshttps://doi.org/10.1016/j.jallcom.2018.02.274openalex-snapshot
Metallurgical properties and biomimetic HA deposition performance of Ti-Nb PIM alloys
inferred← citeshttps://doi.org/10.1016/j.jallcom.2018.03.321openalex-snapshot
Microstructural and core loss behaviors of addictive Fe-17 at% P based on Fe-3.5 wt% Si alloys in powder injection molding
inferred← citeshttps://doi.org/10.1016/j.jallcom.2020.156059openalex-snapshot
Research on preparation process for the in situ nanosized Zr(Y)O2 particles dispersion-strengthened tungsten alloy through synthesizing doped hexagonal (NH4)0.33·WO3
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.180236openalex-snapshot
Improving densification in Al2024 injection moulding parts by trace additions and its ThermoCalc simulations
inferred← citeshttps://doi.org/10.1016/j.jer.2023.100102openalex-snapshot
An experimental investigation of screw-based material extrusion 3D printing of metallic parts
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2004.08.001openalex-snapshot
Polymer derived ceramic microparts from X-ray lithography—cross-linking behavior and process optimization
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2007.08.004openalex-snapshot
Production of alumina parts by powder injection molding with a binder system based on high density polyethylene
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2008.02.001openalex-snapshot
Direct observation of mould cavity filling in ceramic injection moulding
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2010.11.034openalex-snapshot
Micro powder injection moulding of alumina micro-channel part
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2011.02.008openalex-snapshot
Simulation of micro powder injection moulding: Powder segregation and yield stress effects during form filling
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2013.08.017openalex-snapshot
Room-temperature injection molding of aqueous alumina-polyvinylpyrrolidone suspensions
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2015.06.006openalex-snapshot
New eco-friendly binder based on natural rubber for ceramic injection molding process
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2023.09.030openalex-snapshot
High-capacity Li4Ti5O12-C thick ceramic electrodes manufactured by powder injection moulding
inferred← citeshttps://doi.org/10.1016/j.jmapro.2017.06.008openalex-snapshot
Powder injection molding of PNN-PMN-PZN doped low temperature sintering PZT ceramics
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.12.038openalex-snapshot
Oxygen content control in metal injection molding of 316L austenitic stainless steel using water atomized powder
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.08.058openalex-snapshot
The investigation of sintering temperature and Ni interlayer effects on diffusion bonding in inserted metal injection molding
inferred← citeshttps://doi.org/10.1016/j.jmapro.2024.03.076openalex-snapshot
Quantification of shape parameters of Co-Cr-Mo-Si multiphase compounds and their role in the processing of metal injection molding feedstocks
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2004.03.009openalex-snapshot
Rheological properties of feedstocks prepared with steatite powder and polyethylene-based thermoplastic binders
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2004.07.138openalex-snapshot
Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2004.09.051openalex-snapshot
Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2005.02.166openalex-snapshot
Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2006.03.154openalex-snapshot
A new binder for powder injection molding titanium and other reactive metals
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2006.04.111openalex-snapshot
Experiments and numerical modelling of solid state sintering for 316L stainless steel components
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2006.08.004openalex-snapshot
A model for PEG removal from alumina injection moulded parts by solvent debinding
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.04.097openalex-snapshot
Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding
showing the first 200 of 654 · page through all 654
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.